I'm running Lucent Postmaster 3 ComOS version 3.9 which is running just fine
I'll double check the config Thanks On Wed, 14 Jan 2004, Dustin Doris wrote: > > On Wed, 14 Jan 2004, Adil Bikarbass wrote: > > > Well i've noticed after reading the debug that the request with the empty > > username did not even hit the radius server (nothing on the debug output) > > > > But when using any character on the username i got some input : > > > > I would say that is a problem on your NAS. > > > > --------- Begining of Input ----- > > > > rad_recv: Accounting-Request packet from host my_NAS:1026, id=252, > > length=101 > > Acct-Session-Id = "B800005D" > > User-Name = "t" > > NAS-IP-Address = my_NAS > > NAS-Port = 45 > > NAS-Port-Type = ISDN > > Acct-Status-Type = Start > > Acct-Authentic = RADIUS > > Called-Station-Id = "1" > > Calling-Station-Id = "037680045" > > Service-Type = Framed-User > > Framed-Protocol = PPP > > Framed-IP-Address = 194.204.200.232 > > Acct-Delay-Time = 0 > > modcall: entering group preacct for request 28 > > rlm_realm: No '/' in User-Name = "t", looking up realm NULL > > rlm_realm: No such realm "NULL" > > modcall[preacct]: module "ROAM" returns noop for request 28 > > rlm_realm: No '@' in User-Name = "t", looking up realm NULL > > rlm_realm: No such realm "NULL" > > modcall[preacct]: module "suffix" returns noop for request 28 > > modcall[preacct]: module "files" returns noop for request 28 > > modcall[preacct]: module "preprocess" returns noop for request 28 > > modcall: group preacct returns noop for request 28 > > modcall: entering group accounting for request 28 > > rlm_acct_unique: WARNING: Attribute NAS-Port-Id was not found in request, > > unique ID MAY be inconsistent > > rlm_acct_unique: Hashing ',Client-IP-Address = my_NAS,NAS-IP-Address = > > my_NAS,Acct-Session-Id = "B800005D",User-Name = "t"' > > rlm_acct_unique: Acct-Unique-Session-ID = "2dd4757bbb6a253d". > > modcall[accounting]: module "acct_unique" returns ok for request 28 > > radius_xlat: '/var/log/radius/radacct/my_NAS/detail' > > rlm_detail: /var/log/radius/radacct/%{Client-IP-Address}/detail expands to > > /var/log/radius/radacct/my_NAS/detail > > modcall[accounting]: module "detail" returns ok for request 28 > > modcall[accounting]: module "unix" returns ok for request 28 > > radius_xlat: '/var/log/radius/radutmp' > > radius_xlat: 't' > > modcall[accounting]: module "radutmp" returns ok for request 28 > > modcall: group accounting returns ok for request 28 > > Sending Accounting-Response of id 252 to my_NAS:1026 > > Finished request 28 > > Going to the next request > > Waking up in 6 seconds... > > > > ------ End Debug ------------------------ > > > > My users file contains the following > > > > DEFAUTL Auth-Type := Accept, Called-Station-Id == "1" > > > > Please advise > > > > Adil > > > > > > On Wed, 14 Jan 2004, Anson Rinesmith wrote: > > > > > With the supplied line in your "users" file, could you send me your relevant > > > output from radiusd -X, might help debug your problem. > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED] On Behalf Of Adil > > > Bikarbass > > > Sent: Wednesday, January 14, 2004 10:36 AM > > > To: [EMAIL PROTECTED] > > > Subject: RE: Blank username/password > > > > > > I've tried this too but with the same result when the username is not > > > empty it's accepted otherwise it's rejeted, > > > > > > The problem is with empty usernames/passwords, once again i want to grant > > > access based on the Called-Station-Id no matter what the username is > > > (empty username). > > > > > > Any tips? > > > > > > Thanks > > > > > > On Wed, 14 Jan 2004, Anson Rinesmith wrote: > > > > > > > > > > > >Our users file contains the following DEFAULT entry : > > > > > > > > You have > > > > >DEFAUTL Auth-Type := Accept, Called-Station-Id == "1" > > > > > > > > DEFAULT Called-Station-ID == "9995551234", Auth-Type := "Accept" > > > > > > > > Is Closer to what you need in your users file > > > > > > > > > > > > > > > > - > > > > List info/subscribe/unsubscribe? See > > > http://www.freeradius.org/list/users.html > > > > > > > > > > > > > > -- > > |-Adil Bikarbass > > |-IT Manager > > |-MTDS S.A. > > |-tel +212.3.767.4861 > > |-fax +212.3.767.4863 > > |-gsm +212.6.139. 4541 > > |-14, rue 16 novembre > > |-Rabat, Kingdom of Morocco > > > > - > > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > -- |-Adil Bikarbass |-IT Manager |-MTDS S.A. |-tel +212.3.767.4861 |-fax +212.3.767.4863 |-gsm +212.6.139. 4541 |-14, rue 16 novembre |-Rabat, Kingdom of Morocco - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html