Hey, thanks a lot it worked just fine! I knew it I should do it in the mornign! :)
I've placed the username AFTER all the DEFAULT besined it was told they should be last, also I had to remove the Local Auth-Type! It worked! Thanks again. I'll write if something else come up. Good luck guys! Just to tell : FreeRADIUS is the best I've seen (I've tryed openradius before... fucking incomplete!) Keep GOING THIS WAY though! On Чт , 2004-02-05 at 08:45, Chris Parker wrote: > At 07:25 PM 2/4/2004, Anton Blajev wrote: > >Hello to all! > > > >I've installed freeradius few hours ago. > > > >I've configured it according to my need and tested it firstly with > >radtest, it works just as expected, fine! > > > >After that I've decided to test it how it works with in the real world, > >so.... I've tryed logging in from a win98se machine (that used to work > >with plain ppp.secret file just fine) > > > >After trying out I got this error: > >-------------------------------------------------------------------------------------- > >rad_recv: Access-Request packet from host 127.0.0.1:3975, id=112, > >length=148 > >Thread 2 assigned request 2 > >--- Walking the entire request list --- > >Threads: total/active/spare threads = 4/1/3 > >Nothing to do. Sleeping until we see a request. > >Thread 2 handling request 2, (1 handled so far) > > User-Name = "steve" > > Service-Type = Framed-User > > Framed-Protocol = PPP > > MS-CHAP-Challenge = 0x39363331393835353831343234303433 > > MS-CHAP2-Response = > >0x010407ccac6a99be8a4398fedf66beb0cfc00000000000000000ce27d9a5235ff6bf349a672c6d584f9987782bc2ad0690c4 > > NAS-Identifier = "router.lozenetz.net" > > NAS-Port-Type = Virtual > >modcall: entering group authorize for request 2 > > modcall[authorize]: module "preprocess" returns ok for request 2 > > rlm_mschap: Found MS-CHAP attributes. Setting 'Auth-Type := MS-CHAP' > > modcall[authorize]: module "mschap" returns ok for request 2 > > users: Matched DEFAULT at 152 > > users: Matched DEFAULT at 171 > > users: Matched DEFAULT at 183 > > Note that it is matching your DEFAULT entries, not the specific 'steve' > entry. > > >-------------------------------- > >steve Auth-Type := Local, User-Password == "testing" > > Try removing the 'Auth-Type' from this line. Since you want to use > MS-CHAP, you should let the MS-CHAP module detect and set the Auth-Type, > as you are trying to override it here. > > I've not used MS-CHAP myself, but from the debug you posted this appears > to be what is occuring. > > -Chris > -- > \\\|||/// \ StarNet Inc. \ Chris Parker > \ ~ ~ / \ WX *is* Wireless! \ Director, Engineering > | @ @ | \ http://www.starnetwx.net \ (847) 963-0116 > oOo---(_)---oOo--\------------------------------------------------------ > \ Wholesale Internet Services - http://www.megapop.net > > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
