Maybe you could post the initial debug lines to see which users is being matched.
One probability is that the default user is being matched, and not the one you have intended, if you are using leap for authentication, and assuming you have a "right" configuration file for FreeRadius, your line in the users file should look something like: test Auth-Type := eap, User-Password == "123456" Service-Type = Login-User German Rodriguez. > -----Original Message----- > From: BLANCA FERRERO RODRIGUEZ [mailto:[EMAIL PROTECTED] > Sent: Friday, February 20, 2004 2:23 AM > To: [EMAIL PROTECTED] > Subject: Re: user password for LEAP > > BLANCA FERRERO RODRIGUEZ <[EMAIL PROTECTED]> wrote: > > > The communication between my AP and the server seems > correct in the > > > first messages, but when the AP replies to the server challenge, > > I can > > > see several error messages. The first ones is this: > > > ' No user-password or NT-Password configured for this user' > > > but I have the password defined in the users file... > > > > So run the server in debugging mode, and see if that line of the > > users file is matched when the request comes in. > > > > Alan DeKok. > > > > I don't understand your answer very well because I already > run the server in debbug mode and the messages I put in my > mail are the ones I can see on the screen... and I guess the > line with the password in the users file doesn't match the > one in the packet as the message I get is the one above. > > BLanca > > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > Advertencia:La informacion contenida en este mensaje es confidencial y restringida, por lo tanto esta destinada unicamente para el uso de la persona arriba indicada, se le notifica que esta prohibida la difusion de este mensaje. Si ha recibido este mensaje por error, o si hay problemas en la transmision, favor de comunicarse con el remitente. Gracias. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
