Try setting:
use_mppe = no
with_nt_domain_hack = no
in the mschap configuration in section modules of radiusd.conf
I had the same problem, that tweak fixed it.
Hope this helps,
Rinaldo Bergamini
Antonio Fernandes wrote:
> Hi!
>
> I've installed freeradius-snapshot-20040419 and I can't get past this
> problem: "Had sent TLV failure, rejecting"
>
> Bellow is the 'radiusd -X' log.
>
> Thanks
>
> ------------------------------
>
> Listening on authentication *:1812
> Listening on accounting *:1813
> Listening on proxy *:1814
> Ready to process requests.
> rad_recv: Access-Request packet from host 192.168.1.230:21645, id=135,
> length=119
> User-Name = "xpto1"
> Framed-MTU = 1400
> Called-Station-Id = "000e.d7b1.3e30"
> Calling-Station-Id = "0004.e2aa.b4f2"
> Message-Authenticator = 0x29004505131667d146c1a251638d9a3f
> EAP-Message = 0x0202000a017870746f31
> NAS-Port-Type = Wireless-802.11
> NAS-Port = 421
> Service-Type = Framed-User
> NAS-IP-Address = 192.168.1.230
> Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 0
> radius_xlat:
> '/servicos/freeRadius/var/log/radius/radacct/auth-detail' rlm_detail:
> /servicos/freeRadius/var/log/radius/radacct/auth-detail expands to
> /servicos/freeRadius/var/log/radius/radacct/auth-detail
> modcall[authorize]: module "auth_log" returns ok for request 0
> rlm_realm: No '@' in User-Name = "xpto1", looking up realm NULL
> rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix"
> returns noop for request 0 rlm_eap: EAP packet type response id 2
> length 10 rlm_eap: No EAP Start, assuming it's an on-going EAP
> conversation modcall[authorize]: module "eap" returns updated for
> request 0 users: Matched xpto1 at 33
> modcall[authorize]: module "files" returns ok for request 0
> modcall: group authorize returns updated for request 0
> rad_check_password: Found Auth-Type EAP
> auth: type "EAP"
> Processing the authenticate section of radiusd.conf
> modcall: entering group authenticate for request 0
> rlm_eap: EAP Identity
> rlm_eap: processing type tls
> rlm_eap_tls: Initiate
> rlm_eap_tls: Start returned 1
> modcall[authenticate]: module "eap" returns handled for request 0
> modcall: group authenticate returns handled for request 0
> Sending Access-Challenge of id 135 to 192.168.1.230:21645
> EAP-Message = 0x010300061520
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0x31b3fb4539b4e75af135e9c834f1d2e3
> Finished request 0
> Going to the next request
> --- Walking the entire request list ---
> Waking up in 6 seconds...
> rad_recv: Access-Request packet from host 192.168.1.230:21645, id=136,
> length=133
> User-Name = "xpto1"
> Framed-MTU = 1400
> Called-Station-Id = "000e.d7b1.3e30"
> Calling-Station-Id = "0004.e2aa.b4f2"
> Message-Authenticator = 0xc090207a0acd1167649a91c74940b03e
> EAP-Message = 0x020300060319
> NAS-Port-Type = Wireless-802.11
> NAS-Port = 421
> State = 0x31b3fb4539b4e75af135e9c834f1d2e3
> Service-Type = Framed-User
> NAS-IP-Address = 192.168.1.230
> Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 1
> radius_xlat:
> '/servicos/freeRadius/var/log/radius/radacct/auth-detail' rlm_detail:
> /servicos/freeRadius/var/log/radius/radacct/auth-detail expands to
> /servicos/freeRadius/var/log/radius/radacct/auth-detail
> modcall[authorize]: module "auth_log" returns ok for request 1
> rlm_realm: No '@' in User-Name = "xpto1", looking up realm NULL
> rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix"
> returns noop for request 1 rlm_eap: EAP packet type response id 3
> length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP
> conversation modcall[authorize]: module "eap" returns updated for
> request 1 users: Matched xpto1 at 33
> modcall[authorize]: module "files" returns ok for request 1
> modcall: group authorize returns updated for request 1
> rad_check_password: Found Auth-Type EAP
> auth: type "EAP"
> Processing the authenticate section of radiusd.conf
> modcall: entering group authenticate for request 1
> rlm_eap: Request found, released from the list
> rlm_eap: EAP NAK
> rlm_eap: EAP-NAK asked for EAP-Type/peap
> rlm_eap: processing type tls
> rlm_eap_tls: Initiate
> rlm_eap_tls: Start returned 1
> modcall[authenticate]: module "eap" returns handled for request 1
> modcall: group authenticate returns handled for request 1
> Sending Access-Challenge of id 136 to 192.168.1.230:21645
> EAP-Message = 0x010400061920
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0xea7a2e0bfa5346eae55a7a8ac07b84f8
> Finished request 1
> Going to the next request
> Waking up in 6 seconds...
> rad_recv: Access-Request packet from host 192.168.1.230:21645, id=137,
> length=207
> User-Name = "xpto1"
> Framed-MTU = 1400
> Called-Station-Id = "000e.d7b1.3e30"
> Calling-Station-Id = "0004.e2aa.b4f2"
> Message-Authenticator = 0x3e6dac25a6223dc72073df49d0694e7a
> EAP-Message =
> 0x0204005019800000004616030100410100003d0301408ea0010e236d13140e781e74f5123f91fa4c9acae63796c881abf9843188ae00001600040005000a000900640062000300060013001200630100
> NAS-Port-Type = Wireless-802.11
> NAS-Port = 421
> State = 0xea7a2e0bfa5346eae55a7a8ac07b84f8
> Service-Type = Framed-User
> NAS-IP-Address = 192.168.1.230
> Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 2
> radius_xlat:
> '/servicos/freeRadius/var/log/radius/radacct/auth-detail' rlm_detail:
> /servicos/freeRadius/var/log/radius/radacct/auth-detail expands to
> /servicos/freeRadius/var/log/radius/radacct/auth-detail
> modcall[authorize]: module "auth_log" returns ok for request 2
> rlm_realm: No '@' in User-Name = "xpto1", looking up realm NULL
> rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix"
> returns noop for request 2 rlm_eap: EAP packet type response id 4
> length 80 rlm_eap: No EAP Start, assuming it's an on-going EAP
> conversation modcall[authorize]: module "eap" returns updated for
> request 2 users: Matched xpto1 at 33
> modcall[authorize]: module "files" returns ok for request 2
> modcall: group authorize returns updated for request 2
> rad_check_password: Found Auth-Type EAP
> auth: type "EAP"
> Processing the authenticate section of radiusd.conf
> modcall: entering group authenticate for request 2
> rlm_eap: Request found, released from the list
> rlm_eap: EAP/peap
> rlm_eap: processing type peap
> rlm_eap_peap: Authenticate
> rlm_eap_tls: processing TLS
> rlm_eap_tls: Length Included
> eaptls_verify returned 11
> (other): before/accept initialization
> TLS_accept: before/accept initialization
> rlm_eap_tls: <<< TLS 1.0 Handshake [length 0041], ClientHello
> TLS_accept: SSLv3 read client hello A
> rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello
> TLS_accept: SSLv3 write server hello A
> rlm_eap_tls: >>> TLS 1.0 Handshake [length 0694], Certificate
> TLS_accept: SSLv3 write certificate A
> rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
> TLS_accept: SSLv3 write server done A
> TLS_accept: SSLv3 flush data
> TLS_accept:error in SSLv3 read client certificate A
> In SSL Handshake Phase
> In SSL Accept mode
> eaptls_process returned 13
> rlm_eap_peap: EAPTLS_HANDLED
> modcall[authenticate]: module "eap" returns handled for request 2
> modcall: group authenticate returns handled for request 2
> Sending Access-Challenge of id 137 to 192.168.1.230:21645
> EAP-Message =
> 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
> EAP-Message =
> 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
> EAP-Message =
> 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
> EAP-Message =
> 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
> EAP-Message = 0x652e636f6d301e170d3034303132353133323630375a
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0x0a1caa803c5035f808a3a04e94ad179e
> Finished request 2
> Going to the next request
> Waking up in 6 seconds...
> rad_recv: Access-Request packet from host 192.168.1.230:21645, id=138,
> length=133
> User-Name = "xpto1"
> Framed-MTU = 1400
> Called-Station-Id = "000e.d7b1.3e30"
> Calling-Station-Id = "0004.e2aa.b4f2"
> Message-Authenticator = 0x3f8ccdd565d57b7a02cac8f8def24d2e
> EAP-Message = 0x020500061900
> NAS-Port-Type = Wireless-802.11
> NAS-Port = 421
> State = 0x0a1caa803c5035f808a3a04e94ad179e
> Service-Type = Framed-User
> NAS-IP-Address = 192.168.1.230
> Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 3
> radius_xlat:
> '/servicos/freeRadius/var/log/radius/radacct/auth-detail' rlm_detail:
> /servicos/freeRadius/var/log/radius/radacct/auth-detail expands to
> /servicos/freeRadius/var/log/radius/radacct/auth-detail
> modcall[authorize]: module "auth_log" returns ok for request 3
> rlm_realm: No '@' in User-Name = "xpto1", looking up realm NULL
> rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix"
> returns noop for request 3 rlm_eap: EAP packet type response id 5
> length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP
> conversation modcall[authorize]: module "eap" returns updated for
> request 3 users: Matched xpto1 at 33
> modcall[authorize]: module "files" returns ok for request 3
> modcall: group authorize returns updated for request 3
> rad_check_password: Found Auth-Type EAP
> auth: type "EAP"
> Processing the authenticate section of radiusd.conf
> modcall: entering group authenticate for request 3
> rlm_eap: Request found, released from the list
> rlm_eap: EAP/peap
> rlm_eap: processing type peap
> rlm_eap_peap: Authenticate
> rlm_eap_tls: processing TLS
> rlm_eap_tls: Received EAP-TLS ACK message
> rlm_eap_tls: ack handshake fragment handler
> eaptls_verify returned 1
> eaptls_process returned 13
> rlm_eap_peap: EAPTLS_HANDLED
> modcall[authenticate]: module "eap" returns handled for request 3
> modcall: group authenticate returns handled for request 3
> Sending Access-Challenge of id 138 to 192.168.1.230:21645
> EAP-Message =
> 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
> EAP-Message =
> 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
> EAP-Message =
> 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
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0xfd2c42b16f7489b27dcc559881aae1f2
> Finished request 3
> Going to the next request
> Waking up in 6 seconds...
> rad_recv: Access-Request packet from host 192.168.1.230:21645, id=139,
> length=319
> User-Name = "xpto1"
> Framed-MTU = 1400
> Called-Station-Id = "000e.d7b1.3e30"
> Calling-Station-Id = "0004.e2aa.b4f2"
> Message-Authenticator = 0x2d8e802fe1714737cec61db525370ecf
> EAP-Message =
> 0x020600c01980000000b616030100861000008200805dc72c9dc8d8f4ea65ce7ee6f10d0b80fbf0b5aeb97ab9f7ab2ad301f527650b6cc3089b688651a6420df51d2594642f94f8d092000edbce4ba099ca7153ae9be65fe55de96af2bf46da52843b7feec444e7683c76bbfed2cd8ef873cf90431be94e54cce6de08ab00bd51a80575adae4b623e9cee8db072c0f2ce55d5638f6514030100010116030100206d7f504b7c14009df312646d7e2c4cd6acf44ee02f6d7d79fbbd0ae90bb5828c
> NAS-Port-Type = Wireless-802.11
> NAS-Port = 421
> State = 0xfd2c42b16f7489b27dcc559881aae1f2
> Service-Type = Framed-User
> NAS-IP-Address = 192.168.1.230
> Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 4
> radius_xlat:
> '/servicos/freeRadius/var/log/radius/radacct/auth-detail' rlm_detail:
> /servicos/freeRadius/var/log/radius/radacct/auth-detail expands to
> /servicos/freeRadius/var/log/radius/radacct/auth-detail
> modcall[authorize]: module "auth_log" returns ok for request 4
> rlm_realm: No '@' in User-Name = "xpto1", looking up realm NULL
> rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix"
> returns noop for request 4 rlm_eap: EAP packet type response id 6
> length 192 rlm_eap: No EAP Start, assuming it's an on-going EAP
> conversation modcall[authorize]: module "eap" returns updated for
> request 4 users: Matched xpto1 at 33
> modcall[authorize]: module "files" returns ok for request 4
> modcall: group authorize returns updated for request 4
> rad_check_password: Found Auth-Type EAP
> auth: type "EAP"
> Processing the authenticate section of radiusd.conf
> modcall: entering group authenticate for request 4
> rlm_eap: Request found, released from the list
> rlm_eap: EAP/peap
> rlm_eap: processing type peap
> rlm_eap_peap: Authenticate
> rlm_eap_tls: processing TLS
> rlm_eap_tls: Length Included
> eaptls_verify returned 11
> rlm_eap_tls: <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange
> TLS_accept: SSLv3 read client key exchange A
> rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001]
> rlm_eap_tls: <<< TLS 1.0 Handshake [length 0010], Finished
> TLS_accept: SSLv3 read finished A
> rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001]
> TLS_accept: SSLv3 write change cipher spec A
> rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished
> TLS_accept: SSLv3 write finished A
> TLS_accept: SSLv3 flush data
> (other): SSL negotiation finished successfully
> SSL Connection Established
> eaptls_process returned 13
> rlm_eap_peap: EAPTLS_HANDLED
> modcall[authenticate]: module "eap" returns handled for request 4
> modcall: group authenticate returns handled for request 4
> Sending Access-Challenge of id 139 to 192.168.1.230:21645
> EAP-Message =
> 0x0107003119001403010001011603010020a9b03e10d77e1b65aa574eaee1a54c40b890028131fa1b808e2593e7156bdabe
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0xd090259828bffc4623194a1baeb025fd
> Finished request 4
> Going to the next request
> Waking up in 6 seconds...
> rad_recv: Access-Request packet from host 192.168.1.230:21645, id=140,
> length=133
> User-Name = "xpto1"
> Framed-MTU = 1400
> Called-Station-Id = "000e.d7b1.3e30"
> Calling-Station-Id = "0004.e2aa.b4f2"
> Message-Authenticator = 0x6443dbef487769a00f49b8e75d72f327
> EAP-Message = 0x020700061900
> NAS-Port-Type = Wireless-802.11
> NAS-Port = 421
> State = 0xd090259828bffc4623194a1baeb025fd
> Service-Type = Framed-User
> NAS-IP-Address = 192.168.1.230
> Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 5
> radius_xlat:
> '/servicos/freeRadius/var/log/radius/radacct/auth-detail' rlm_detail:
> /servicos/freeRadius/var/log/radius/radacct/auth-detail expands to
> /servicos/freeRadius/var/log/radius/radacct/auth-detail
> modcall[authorize]: module "auth_log" returns ok for request 5
> rlm_realm: No '@' in User-Name = "xpto1", looking up realm NULL
> rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix"
> returns noop for request 5 rlm_eap: EAP packet type response id 7
> length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP
> conversation modcall[authorize]: module "eap" returns updated for
> request 5 users: Matched xpto1 at 33
> modcall[authorize]: module "files" returns ok for request 5
> modcall: group authorize returns updated for request 5
> rad_check_password: Found Auth-Type EAP
> auth: type "EAP"
> Processing the authenticate section of radiusd.conf
> modcall: entering group authenticate for request 5
> rlm_eap: Request found, released from the list
> rlm_eap: EAP/peap
> rlm_eap: processing type peap
> rlm_eap_peap: Authenticate
> rlm_eap_tls: processing TLS
> rlm_eap_tls: Received EAP-TLS ACK message
> rlm_eap_tls: ack handshake is finished
> eaptls_verify returned 3
> eaptls_process returned 3
> rlm_eap_peap: EAPTLS_SUCCESS
> modcall[authenticate]: module "eap" returns handled for request 5
> modcall: group authenticate returns handled for request 5
> Sending Access-Challenge of id 140 to 192.168.1.230:21645
> EAP-Message =
> 0x0108002019001703010015f317a0be4ba01f7c2850962ec2d6b9e9139ff85606
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0xec0755fde68cf91725bee5a5f9369b53
> Finished request 5
> Going to the next request
> Waking up in 6 seconds...
> rad_recv: Access-Request packet from host 192.168.1.230:21645, id=141,
> length=160
> User-Name = "xpto1"
> Framed-MTU = 1400
> Called-Station-Id = "000e.d7b1.3e30"
> Calling-Station-Id = "0004.e2aa.b4f2"
> Message-Authenticator = 0x49432bb90a3d6fa3cc233b7f4eca339c
> EAP-Message =
> 0x020800211900170301001661c9300edf7e604a8150baea3cbf189a2f2d2855c8c2
> NAS-Port-Type = Wireless-802.11
> NAS-Port = 421
> State = 0xec0755fde68cf91725bee5a5f9369b53
> Service-Type = Framed-User
> NAS-IP-Address = 192.168.1.230
> Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 6
> radius_xlat:
> '/servicos/freeRadius/var/log/radius/radacct/auth-detail' rlm_detail:
> /servicos/freeRadius/var/log/radius/radacct/auth-detail expands to
> /servicos/freeRadius/var/log/radius/radacct/auth-detail
> modcall[authorize]: module "auth_log" returns ok for request 6
> rlm_realm: No '@' in User-Name = "xpto1", looking up realm NULL
> rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix"
> returns noop for request 6 rlm_eap: EAP packet type response id 8
> length 33 rlm_eap: No EAP Start, assuming it's an on-going EAP
> conversation modcall[authorize]: module "eap" returns updated for
> request 6 users: Matched xpto1 at 33
> modcall[authorize]: module "files" returns ok for request 6
> modcall: group authorize returns updated for request 6
> rad_check_password: Found Auth-Type EAP
> auth: type "EAP"
> Processing the authenticate section of radiusd.conf
> modcall: entering group authenticate for request 6
> rlm_eap: Request found, released from the list
> rlm_eap: EAP/peap
> rlm_eap: processing type peap
> rlm_eap_peap: Authenticate
> rlm_eap_tls: processing TLS
> eaptls_verify returned 7
> rlm_eap_tls: Done initial handshake
> eaptls_process returned 7
> rlm_eap_peap: EAPTLS_OK
> rlm_eap_peap: Session established. Decoding tunneled attributes.
> rlm_eap_peap: Identity - xpto1
> rlm_eap_peap: Tunneled data is valid.
> PEAP: Got tunneled EAP-Message
> EAP-Message = 0x0208000a017870746f31
> PEAP: Got tunneled identity of xpto1
> PEAP: Setting default EAP type for tunneled EAP session.
> PEAP: Setting User-Name to xpto1
> PEAP: Sending tunneled request
> EAP-Message = 0x0208000a017870746f31
> FreeRADIUS-Proxied-To = 127.0.0.1
> User-Name = "xpto1"
> Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 6
> radius_xlat:
> '/servicos/freeRadius/var/log/radius/radacct/auth-detail' rlm_detail:
> /servicos/freeRadius/var/log/radius/radacct/auth-detail expands to
> /servicos/freeRadius/var/log/radius/radacct/auth-detail
> modcall[authorize]: module "auth_log" returns ok for request 6
> rlm_realm: No '@' in User-Name = "xpto1", looking up realm NULL
> rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix"
> returns noop for request 6 rlm_eap: EAP packet type response id 8
> length 10 rlm_eap: No EAP Start, assuming it's an on-going EAP
> conversation modcall[authorize]: module "eap" returns updated for
> request 6 users: Matched xpto1 at 33
> modcall[authorize]: module "files" returns ok for request 6
> modcall: group authorize returns updated for request 6
> rad_check_password: Found Auth-Type EAP
> auth: type "EAP"
> Processing the authenticate section of radiusd.conf
> modcall: entering group authenticate for request 6
> rlm_eap: EAP Identity
> rlm_eap: processing type mschapv2
> rlm_eap_mschapv2: Issuing Challenge
> modcall[authenticate]: module "eap" returns handled for request 6
> modcall: group authenticate returns handled for request 6
> PEAP: Got tunneled reply RADIUS code 11
> EAP-Message =
> 0x0109001f1a0109001a105529ed01151cb7a297b9d4eec5085b327870746f31
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0x357db4a0baf7c780cb0874f0b4f807d6
> PEAP: Processing from tunneled session code 0x8182f60 11
> EAP-Message =
> 0x0109001f1a0109001a105529ed01151cb7a297b9d4eec5085b327870746f31
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0x357db4a0baf7c780cb0874f0b4f807d6
> PEAP: Got tunneled Access-Challenge
> modcall[authenticate]: module "eap" returns handled for request 6
> modcall: group authenticate returns handled for request 6
> Sending Access-Challenge of id 141 to 192.168.1.230:21645
> EAP-Message =
> 0x010900361900170301002b9fb14d8ea6eeab00267da0962dff083522c3a947c0f1f7696e8f974aa7eefa49b797c2be070ca36509dbd5
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0x3a106f56af29c99fe6957e304e943066
> Finished request 6
> Going to the next request
> Waking up in 6 seconds...
> rad_recv: Access-Request packet from host 192.168.1.230:21645, id=142,
> length=214
> User-Name = "xpto1"
> Framed-MTU = 1400
> Called-Station-Id = "000e.d7b1.3e30"
> Calling-Station-Id = "0004.e2aa.b4f2"
> Message-Authenticator = 0x380695227a4a294521d9c655da7ab889
> EAP-Message =
> 0x020900571900170301004c9fa0c87e5ebdf24511bd51d08e97ac2963d4db343a75ff6cdfd65ffc93f0611f0494569f623e48f7ac1ad5e4a7bdb64cd82ea3d643c1441a746a4bb310f0f7d87b32a90fc5de31e57b678adb
> NAS-Port-Type = Wireless-802.11
> NAS-Port = 421
> State = 0x3a106f56af29c99fe6957e304e943066
> Service-Type = Framed-User
> NAS-IP-Address = 192.168.1.230
> Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 7
> radius_xlat:
> '/servicos/freeRadius/var/log/radius/radacct/auth-detail' rlm_detail:
> /servicos/freeRadius/var/log/radius/radacct/auth-detail expands to
> /servicos/freeRadius/var/log/radius/radacct/auth-detail
> modcall[authorize]: module "auth_log" returns ok for request 7
> rlm_realm: No '@' in User-Name = "xpto1", looking up realm NULL
> rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix"
> returns noop for request 7 rlm_eap: EAP packet type response id 9
> length 87 rlm_eap: No EAP Start, assuming it's an on-going EAP
> conversation modcall[authorize]: module "eap" returns updated for
> request 7 users: Matched xpto1 at 33
> modcall[authorize]: module "files" returns ok for request 7
> modcall: group authorize returns updated for request 7
> rad_check_password: Found Auth-Type EAP
> auth: type "EAP"
> Processing the authenticate section of radiusd.conf
> modcall: entering group authenticate for request 7
> rlm_eap: Request found, released from the list
> rlm_eap: EAP/peap
> rlm_eap: processing type peap
> rlm_eap_peap: Authenticate
> rlm_eap_tls: processing TLS
> eaptls_verify returned 7
> rlm_eap_tls: Done initial handshake
> eaptls_process returned 7
> rlm_eap_peap: EAPTLS_OK
> rlm_eap_peap: Session established. Decoding tunneled attributes.
> rlm_eap_peap: EAP type mschapv2
> rlm_eap_peap: Tunneled data is valid.
> PEAP: Got tunneled EAP-Message
> EAP-Message =
> 0x020900401a0209003b31ea807b652444b45684b1792b35e990230000000000000000118751a3edb39bd054649e8ce03a486444b3511ff9d78200007870746f31
> PEAP: Setting User-Name to xpto1
> PEAP: Adding old state with 35 7d
> PEAP: Sending tunneled request
> EAP-Message =
> 0x020900401a0209003b31ea807b652444b45684b1792b35e990230000000000000000118751a3edb39bd054649e8ce03a486444b3511ff9d78200007870746f31
> FreeRADIUS-Proxied-To = 127.0.0.1
> User-Name = "xpto1"
> State = 0x357db4a0baf7c780cb0874f0b4f807d6
> Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 7
> radius_xlat:
> '/servicos/freeRadius/var/log/radius/radacct/auth-detail' rlm_detail:
> /servicos/freeRadius/var/log/radius/radacct/auth-detail expands to
> /servicos/freeRadius/var/log/radius/radacct/auth-detail
> modcall[authorize]: module "auth_log" returns ok for request 7
> rlm_realm: No '@' in User-Name = "xpto1", looking up realm NULL
> rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix"
> returns noop for request 7 rlm_eap: EAP packet type response id 9
> length 64 rlm_eap: No EAP Start, assuming it's an on-going EAP
> conversation modcall[authorize]: module "eap" returns updated for
> request 7 users: Matched xpto1 at 33
> modcall[authorize]: module "files" returns ok for request 7
> modcall: group authorize returns updated for request 7
> rad_check_password: Found Auth-Type EAP
> auth: type "EAP"
> Processing the authenticate section of radiusd.conf
> modcall: entering group authenticate for request 7
> rlm_eap: Request found, released from the list
> rlm_eap: EAP/mschapv2
> rlm_eap: processing type mschapv2
> rlm_eap_mschapv2: Response is of incorrect length
> rlm_eap: Handler failed in EAP/mschapv2
> rlm_eap: Failed in EAP select
> modcall[authenticate]: module "eap" returns invalid for request 7
> modcall: group authenticate returns invalid for request 7
> auth: Failed to validate the user.
> PEAP: Got tunneled reply RADIUS code 3
> EAP-Message = 0x04090004
> Message-Authenticator = 0x00000000000000000000000000000000
> PEAP: Processing from tunneled session code 0x815f4b0 3
> EAP-Message = 0x04090004
> Message-Authenticator = 0x00000000000000000000000000000000
> PEAP: Tunneled authentication was rejected.
> rlm_eap_peap: FAILURE
> modcall[authenticate]: module "eap" returns handled for request 7
> modcall: group authenticate returns handled for request 7
> Sending Access-Challenge of id 142 to 192.168.1.230:21645
> EAP-Message =
> 0x010a00261900170301001ba1ff2bf8c084a2a42acf01a5847bccc3b94e756014379cd25748c8
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0xf4b7effc1439ab129f9209f18694d1e5
> Finished request 7
> Going to the next request
> Waking up in 6 seconds...
> rad_recv: Access-Request packet from host 192.168.1.230:21645, id=143,
> length=165
> User-Name = "xpto1"
> Framed-MTU = 1400
> Called-Station-Id = "000e.d7b1.3e30"
> Calling-Station-Id = "0004.e2aa.b4f2"
> Message-Authenticator = 0x226f30f944b9f0366441b057e8f103a4
> EAP-Message =
> 0x020a00261900170301001bb9554ee96adfd0ff14e4acf1f0d14ef23ed446a244b5c123ee20e8
> NAS-Port-Type = Wireless-802.11
> NAS-Port = 421
> State = 0xf4b7effc1439ab129f9209f18694d1e5
> Service-Type = Framed-User
> NAS-IP-Address = 192.168.1.230
> Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 8
> radius_xlat:
> '/servicos/freeRadius/var/log/radius/radacct/auth-detail' rlm_detail:
> /servicos/freeRadius/var/log/radius/radacct/auth-detail expands to
> /servicos/freeRadius/var/log/radius/radacct/auth-detail
> modcall[authorize]: module "auth_log" returns ok for request 8
> rlm_realm: No '@' in User-Name = "xpto1", looking up realm NULL
> rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix"
> returns noop for request 8 rlm_eap: EAP packet type response id 10
> length 38 rlm_eap: No EAP Start, assuming it's an on-going EAP
> conversation modcall[authorize]: module "eap" returns updated for
> request 8 users: Matched xpto1 at 33
> modcall[authorize]: module "files" returns ok for request 8
> modcall: group authorize returns updated for request 8
> rad_check_password: Found Auth-Type EAP
> auth: type "EAP"
> Processing the authenticate section of radiusd.conf
> modcall: entering group authenticate for request 8
> rlm_eap: Request found, released from the list
> rlm_eap: EAP/peap
> rlm_eap: processing type peap
> rlm_eap_peap: Authenticate
> rlm_eap_tls: processing TLS
> eaptls_verify returned 7
> rlm_eap_tls: Done initial handshake
> eaptls_process returned 7
> rlm_eap_peap: EAPTLS_OK
> rlm_eap_peap: Session established. Decoding tunneled attributes.
> rlm_eap_peap: Received EAP-TLV response.
> rlm_eap_peap: Tunneled data is valid.
> rlm_eap_peap: Had sent TLV failure, rejecting.
> rlm_eap: Handler failed in EAP/peap
> rlm_eap: Failed in EAP select
> modcall[authenticate]: module "eap" returns invalid for request 8
> modcall: group authenticate returns invalid for request 8
> auth: Failed to validate the user.
> Delaying request 8 for 1 seconds
> Finished request 8
> Going to the next request
> Waking up in 6 seconds...
> rad_recv: Access-Request packet from host 192.168.1.230:21645, id=143,
> length=165
> Sending Access-Reject of id 143 to 192.168.1.230:21645
> EAP-Message = 0x040a0004
> Message-Authenticator = 0x00000000000000000000000000000000
> --- Walking the entire request list ---
> Waking up in 1 seconds...
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
