Hello,
Has anyone tried or successfully been able to get Cisco Leap to work using FreeRadius?
Components:
- Cisco AIR-AP1230B-A-K9 Access Points running IOS 12.2.15
- Freeradius 0.9.3 installed from the Redhat ES 3.0 RPM, running on a Redhat ES 3.0 Server
If so, would it be possible to get sanitized copies of your Freeradius configuration files (radiusd.conf, users, clients.conf, etc...)? Authenication to the AP itself using radius works prefect, have even setup EAP-TLS and it works prefect!! But leap is a no good...
It's not a configuration issue on the Access Points themselves. Leap works fine when used against Cisco ACS (v3.2.3). However, for security reasons and cost of course we would like to use Freeradius for outside hosts rather than expose our internal ACS server.
Also, I have been unable to get the WDS service working between the AP's and Cisco's WLSE. I'm not surprised since it uses Leap. It does work though with CiscoACS...but Freeradius is a no go. :-(
Any help would be greatly appreciated!!
Thanks,
Jim
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
