Re: Client member in multiple huntgroups

Thomas MARCHESSEAU Mon, 05 Jul 2004 03:33:13 -0700

Hi Ame,

i hope this cut/paste will help you. extract from users file: ( note that i have modifed my real realm by realm.net)

DEFAULT Realm == "realm.net", Huntgroup-Name == "bas", Autz-Type := "autz.realm1.net" DEFAULT Realm == "realm.net", Huntgroup-Name == "lns", Autz-Type := "autz.realm2.net" DEFAULT Realm == "realm.net", Huntgroup-Name == "nas", Autz-Type := "autz.realm3.net" DEFAULT Realm == "realm.net", Huntgroup-Name == "lns-rtc", Autz-Type := "autz.realm4.net" DEFAULT Realm == "realm.net", Huntgroup-Name == "redback", Autz-Type := "autz.realm5.net"

I check for Nas-Ip-Address to assign the correct huntgroup and the correct authentification method.

Arne Brutschy wrote:

Hi,

I have clients that are in multiple huntgroups (ie. in "dot1xswitches",
used for 802.1x auth and "shellaccess" used to give access to the config
shell of this switch. Is it possible to have a client in multiple
huntgroups?

Regards,
Arne

- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

Re: Client member in multiple huntgroups

Reply via email to