Hi.
I'm running freeradius 1.0.0-pre3 od RH9.0.
I have configured freeradius (with realm and IP pool) with PEAP support on
mysql backend. NAS is Cisco 1100 and client is CB21AG (Cisco) pcmcia
adapter. Authorization and authentification works ok.
But my problem is that my winXP didn't recieved IP address from the pool.
But Freeradius send it !
rlm_ippool: Searching for an entry for nas/port: x.x.x.x/264
rlm_ippool: Allocating ip to nas/port: x.x.x.x/264
rlm_ippool: num: 1
rlm_ippool: Allocated ip x.x.x.x to client on nas x.x.x.x,port
264
modcall[post-auth]: module "ip_users" returns ok for request 10
modcall: group post-auth returns ok for request 10
Sending Access-Accept of id 22 to x.x.x.x:21645
MS-MPPE-Recv-Key =
0xbd26e075c1307e8cd870088a20f6ae673eaac040ec91cf18fae1106b251bc2a4
MS-MPPE-Send-Key =
0xb1f2feddb2d416232f90277a1edee44b31041b85270c15b91077e6c2a9cef1c5
EAP-Message = 0x030a0004
Message-Authenticator = 0x00000000000000000000000000000000
User-Name = "jansat01"
Framed-IP-Address = x.x.x.x
Framed-IP-Netmask = 255.255.255.0
Finished request 10
When I shutdown the winXP client Freeradius release IP address.
rlm_ippool: Searching for an entry for nas/port: x.x.x.x/264
rlm_ippool: Deallocated entry for ip/port: x.x.x.x/264
rlm_ippool: num: 0
modcall[accounting]: module "ip_users" returns ok for request 12
Cisco 1100 (AP) recieve RADIUS message about Framed-IP-address (debug dhcp
show it).
Where is the problem ? I have more APs so DHCP on each AP isn't good for
me. I hoped that Freeradius IP pool solved this problem for me.
Thanks.
--
Bc. Jan 'EIS' Satko Slovak University of Agriculture
network & system manager Tr. A. Hlinku 2
Tel: +421 37 7412 616 949 76 Nitra Slovakia
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
