On Sun, Aug 01, 2004 at 02:17:41PM +1200, Barry Murphy wrote: > Going forward I have looked at the scripts and it shows that TTY is being > used and clients are getting a Nas-Port begining with 0, then 1 for the > second user as shown below.
> Sun Aug 1 12:00:49 2004 > Acct-Session-Id = "410C2FFA01F0" > User-Name = "icepick" > Acct-Status-Type = Start > Service-Type = Framed-User > Framed-Protocol = PPP > Acct-Authentic = RADIUS > NAS-Port-Type = Async > Framed-IP-Address = 219.88.249.85 > NAS-IP-Address = 10.23.19.2 > NAS-Port = 0 > Acct-Delay-Time = 0 > Client-IP-Address = 10.22.19.2 > Acct-Unique-Session-Id = "819283b999345e7d" > Timestamp = 1091318449 > Sun Aug 1 13:26:04 2004 > Acct-Session-Id = "410C43DA0201" > User-Name = "neil" > Acct-Status-Type = Start > Service-Type = Framed-User > Framed-Protocol = PPP > Acct-Authentic = RADIUS > NAS-Port-Type = Async > Framed-IP-Address = 219.88.249.89 > NAS-IP-Address = 10.23.19.2 > NAS-Port = 1 > Acct-Delay-Time = 0 > Client-IP-Address = 10.22.19.2 > Acct-Unique-Session-Id = "f27a28a784f81cba" > Timestamp = 1091323564 Those are Accounting-Start packets... To assign an address from an ippool, the port needs to be present in the Access-Request packet. By the time the RADIUS server sees the Accounting-Start packet, the IP address needs to've been already transmitted in the Access-Accept packet. On the other hand, it looks like a Framed-IP-Address _is_ being assigned... Is this still not working? -- Paul "TBBle" Hampson, on an alternate email client. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html