Hi all,
I'm having a problem in the EAP/PEAP part, I think.
I'm trying to authorize a Windows XP SP2 on my RADIUS, and the following problem ocurs:
What could be the problem? (auth type = TLS).
rad_recv: Access-Request packet from host 192.168.2.4:2048, id=0, length=168
User-Name = "root"
NAS-IP-Address = 192.168.2.4
Called-Station-Id = "000f66574649"
Calling-Station-Id = "0020ed792d18"
NAS-Identifier = "000f66574649"
NAS-Port = 12
Framed-MTU = 1400
State = 0x05b373c1c76de7ad819b9f5d89fd2526
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x020800261900170301001b7ef3a5621ca382d03693d3be7d598f1c06d06d45d122b26e2300e2
Message-Authenticator = 0x582cee4856acc3a537c315ea71327ea9
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 8
modcall[authorize]: module "preprocess" returns ok for request 8
modcall[authorize]: module "chap" returns noop for request 8
modcall[authorize]: module "mschap" returns noop for request 8
rlm_realm: No '@' in User-Name = "root", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 8
rlm_eap: EAP packet type response id 8 length 38
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 8
users: Matched DEFAULT at 152
modcall[authorize]: module "files" returns ok for request 8
modcall: group authorize returns updated for request 8
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 8
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
eaptls_verify returned 7
rlm_eap_tls: Done initial handshake
eaptls_process returned 7
rlm_eap_peap: EAPTLS_OK
rlm_eap_peap: Session established. Decoding tunneled attributes.
rlm_eap_peap: Received EAP-TLV response.
rlm_eap_peap: Tunneled data is valid.
rlm_eap_peap: Had sent TLV failure, rejecting.
rlm_eap: Handler failed in EAP/peap
rlm_eap: Failed in EAP select
modcall[authenticate]: module "eap" returns invalid for request 8
modcall: group authenticate returns invalid for request 8
auth: Failed to validate the user.
Delaying request 8 for 1 seconds
Finished request 8
Going to the next request
Waking up in 6 seconds...
--- Walking the entire request list ---
Sending Access-Reject of id 0 to 192.168.2.4:2048
EAP-Message = 0x04080004
Message-Authenticator = 0x00000000000000000000000000000000
Cleaning up request 8 ID 0 with timestamp 411f48d0
Nothing to do. Sleeping until we see a request.
Regards,
Hugo Sousa
SysAdmin / NetworkAdmin
http://www.netsystems.pt
Portugal
