I'm having the same problem. Is there already a knowed solution? -----Original Message----- From: [EMAIL PROTECTED] on behalf of Andrew W. Elble Sent: Mon 8/16/2004 7:45 PM To: [EMAIL PROTECTED] Cc: Subject: EAP/peap mschapv2 broken since pre3?
All,
I'm curious as to if anyone has freeradius 1.0 working with
EAP/peap/mschapv2? I had done a proof-of-concept with a CVS version of
1.0 (~October 2003) and everything was working fine. Now when I
use the release version of 1.0, things just don't work, and/or the
supplicant in windows XP crashes during the protocol exchange.
I have two environments that are minimally configured in a similar fashion;
there is one user in the users file:
aweits Auth-Type := eap, User-Password == "test"
I've provided below the output from 'radiusd -X' for both the CVS
version and the 1.0 release version ("below" meaning "seperate
messages" because mailman is restricting the size of this post).
If anyone can shed some light on what's going on, I'd appreciate it.
I'm willing to provide any additional debugging or detail as necessary...
Thanks,
Andy
--
Andrew W. Elble
[EMAIL PROTECTED]
Senior Network Engineer
Rochester Institute of Technology
PGP: BFAD 8461 4CCF DC95 DA2C B0EB 965B 082E 863E C912
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
<<winmail.dat>>
