I've hit a problem whilst upgrading from 0.9.3 -> 1.0.1 on gentoo linux using the package install.
All compiled ok and the server will start fine but by using radiusd -X to start it's reported that:
auth: user supplied User-Password does NOT match local User-Password
I use the sql module against a mysql server and this is replicated to another secondary server in our network running a backup radiusd (0.9.3). The secondary is still running fine against the same database information.
I have found there are differences in the syntax of the sql query sent to the db but both the old and new format seem to return the same result.
+------+----------+----------------+------------------------------------+----+
| id | UserName | Attribute | Value | op |
+------+----------+----------------+------------------------------------+----+
| 1160 | mb005 | Crypt-Password | $1$hLFjleRC$mZJRYJRqMVS6S.iY6hsXx1 | := |
+------+----------+----------------+------------------------------------+----+
Here is the debug output of a test.
Starting - reading configuration files ...
reread_config: reading radiusd.conf
Config: including file: /etc/raddb/proxy.conf
Config: including file: /etc/raddb/clients.conf
Config: including file: /etc/raddb/snmp.conf
Config: including file: /etc/raddb/sql.conf
main: prefix = "/usr"
main: localstatedir = "/var"
main: logdir = "/var/log/radius"
main: libdir = "/usr/lib"
main: radacctdir = "/var/log/radius/radacct"
main: hostname_lookups = no
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 0
main: allow_core_dumps = no
main: log_stripped_names = yes
main: log_file = "/var/log/radius/radius.log"
main: log_auth = yes
main: log_auth_badpass = yes
main: log_auth_goodpass = yes
main: pidfile = "/var/run/radiusd/radiusd.pid"
main: bind_address = 127.0.0.1 IP address [127.0.0.1]
main: user = "(null)"
main: group = "(null)"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/usr/sbin/checkrad"
main: proxy_requests = yes
proxy: retry_delay = 5
proxy: retry_count = 3
proxy: synchronous = no
proxy: default_fallback = yes
proxy: dead_time = 120
proxy: post_proxy_authorize = yes
proxy: wake_all_if_all_dead = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files: reading dictionary
read_config_files: reading naslist
Using deprecated naslist file. Support for this will go away soon.
read_config_files: reading clients
read_config_files: reading realms
radiusd: entering modules setup
Module: Library search path is /usr/lib
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
pap: encryption_scheme = "crypt"
Module: Instantiated pap (pap)
Module: Loaded SQL
sql: driver = "rlm_sql_mysql"
sql: server = "localhost"
sql: port = "3306"
sql: login = "radius"
sql: password = "********"
sql: radius_db = "radius"
sql: acct_table = "radacct"
sql: acct_table2 = "radacct"
sql: authcheck_table = "radcheck"
sql: authreply_table = "radreply"
sql: groupcheck_table = "radgroupcheck"
sql: groupreply_table = "radgroupreply"
sql: usergroup_table = "usergroup"
sql: nas_table = "nas"
sql: dict_table = "dictionary"
sql: sqltrace = no
sql: sqltracefile = "/var/log/radius/sqltrace.sql"
sql: readclients = no
sql: deletestalesessions = yes
sql: num_sql_socks = 5
sql: sql_user_name = "%{User-Name}"
sql: default_user_profile = ""
sql: query_on_not_found = no
sql: authorize_check_query = "SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id"
sql: authorize_reply_query = "SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id"
sql: authorize_group_check_query = "SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = '%{SQL-User-Name}' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id"
sql: authorize_group_reply_query = "SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE usergroup.Username = '%{SQL-User-Name}' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id"
sql: accounting_onoff_query = "UPDATE radacct SET AcctStopTime='%S', AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime), AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time}' WHERE AcctSessionTime=0 AND AcctStopTime=0 AND NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'"
sql: accounting_update_query = "UPDATE radacct ? SET FramedIPAddress = '%{Framed-IP-Address}', ? AcctSessionTime = '%{Acct-Session-Time}', ? AcctInputOctets = '%{Acct-Input-Octets}', ? AcctOutputOctets = '%{Acct-Output-Octets}' ? WHERE AcctSessionId = '%{Acct-Session-Id}' ? AND UserName = '%{SQL-User-Name}' ? AND NASIPAddress= '%{NAS-IP-Address}'"
sql: accounting_update_query_alt = "INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S',INTERVAL (%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0}) SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0')"
sql: accounting_start_query = "INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', '0', '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Acct-Delay-Time}', '0')"
sql: accounting_start_query_alt = "UPDATE radacct SET AcctStartTime = '%S', AcctStartDelay = '%{Acct-Delay-Time}', ConnectInfo_start = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'"
sql: accounting_stop_query = "UPDATE radacct SET AcctStopTime = '%S', AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets = '%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}', AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time}', ConnectInfo_stop = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'"
sql: accounting_stop_query_alt = "INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0}) SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{Acct-Delay-Time}')"
sql: group_membership_query = "SELECT GroupName FROM usergroup WHERE UserName='%{SQL-User-Name}'"
sql: connect_failure_retry_delay = 60
sql: simul_count_query = ""
sql: simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName, NASIPAddress, NASPortId, FramedIPAddress, CallingStationId, FramedProtocol FROM radacct WHERE UserName='%{SQL-User-Name}' AND AcctStopTime = 0"
sql: postauth_table = "radpostauth"
sql: postauth_query = "INSERT into radpostauth (id, user, pass, reply, date) values ('', '%{User-Name}', '%{User-Password:-Chap-Password}', '%{reply:Packet-Type}', NOW())"
sql: safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
rlm_sql (sql): Attempting to connect to [EMAIL PROTECTED]:3306/radius
rlm_sql (sql): starting 0
rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
rlm_sql_mysql: Starting connect to MySQL server for #0
rlm_sql (sql): Connected new DB handle, #0
rlm_sql (sql): starting 1
rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
rlm_sql_mysql: Starting connect to MySQL server for #1
rlm_sql (sql): Connected new DB handle, #1
rlm_sql (sql): starting 2
rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
rlm_sql_mysql: Starting connect to MySQL server for #2
rlm_sql (sql): Connected new DB handle, #2
rlm_sql (sql): starting 3
rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
rlm_sql_mysql: Starting connect to MySQL server for #3
rlm_sql (sql): Connected new DB handle, #3
rlm_sql (sql): starting 4
rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
rlm_sql_mysql: Starting connect to MySQL server for #4
rlm_sql (sql): Connected new DB handle, #4
Module: Instantiated sql (sql)
Module: Loaded preprocess
preprocess: huntgroups = "/etc/raddb/huntgroups"
preprocess: hints = "/etc/raddb/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = yes
Module: Instantiated preprocess (preprocess)
Module: Loaded files
files: usersfile = "/etc/raddb/users"
files: acctusersfile = "/etc/raddb/acct_users"
files: preproxy_usersfile = "/etc/raddb/preproxy_users"
files: compat = "no"
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port-Id"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded detail
detail: detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded Counter
counter: filename = "/etc/raddb/db.daily"
counter: key = "User-Name"
counter: reset = "daily"
counter: count-attribute = "Acct-Session-Time"
counter: counter-name = "Daily-Session-Time"
counter: check-name = "Max-Daily-Session"
counter: allowed-servicetype = "Framed-User"
counter: cache-size = 5000
rlm_counter: Counter attribute Daily-Session-Time is number 1671
rlm_counter: Current Time: 1096637018 [2004-10-01 14:23:38], Next reset 1096671600 [2004-10-02 00:00:00]
Module: Instantiated counter (daily)
Module: Loaded radutmp
radutmp: filename = "/var/log/radius/radutmp"
radutmp: username = "%{User-Name}"
radutmp: case_sensitive = yes
radutmp: check_with_nas = yes
radutmp: perm = 384
radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
radutmp: filename = "/var/log/radius/sradutmp"
radutmp: username = "%{User-Name}"
radutmp: case_sensitive = yes
radutmp: check_with_nas = yes
radutmp: perm = 420
radutmp: callerid = no
Module: Instantiated radutmp (sradutmp)
Module: Loaded IPPOOL
ippool: session-db = "/etc/raddb/db.ippool-stjohns"
ippool: ip-index = "/etc/raddb/db.ipindex-stjohns"
ippool: range-start = ***.***.***.*** IP address [***.***.***.***]
ippool: range-stop = ***.***.***.*** IP address [***.***.***.***]
ippool: netmask = 255.255.255.0 IP address [255.255.255.0]
ippool: cache-size = 28
ippool: override = no
ippool: maximum-timeout = 0
Module: Instantiated ippool (stjohns)
Module: Loaded eap
eap: default_eap_type = "md5"
eap: timer_expire = 60
eap: ignore_unknown_eap_types = no
eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
Module: Instantiated eap (eap)
Listening on authentication 127.0.0.1:1812
Listening on accounting 127.0.0.1:1813
Listening on proxy 127.0.0.1:1814
Ready to process requests.
rad_recv: Access-Request packet from host 127.0.0.1:37945, id=26, length=57
User-Name = "mr005"
User-Password = "********"
NAS-IP-Address = 255.255.255.255
NAS-Port = 10
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
radius_xlat: 'mr005'
rlm_sql (sql): sql_set_user escaped user --> 'mr005'
radius_xlat: 'SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'mr005' ORDER BY id'
rlm_sql (sql): Reserving sql socket id: 4
radius_xlat: 'SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = 'mr005' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id'
radius_xlat: 'SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'mr005' ORDER BY id'
radius_xlat: 'SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE usergroup.Username = 'mr005' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id'
rlm_sql (sql): Released sql socket id: 4
modcall[authorize]: module "sql" returns ok for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
users: Matched DEFAULT at 156
modcall[authorize]: module "files" returns ok for request 0
modcall: group authorize returns ok for request 0
rad_check_password: Found Auth-Type local
auth: type Local
auth: user supplied User-Password does NOT match local User-Password
auth: Failed to validate the user.
Login incorrect: [mr005/*********] (from client localhost port 10)
Delaying request 0 for 1 seconds
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Sending Access-Reject of id 26 to 127.0.0.1:37945
Waking up in 4 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 26 with timestamp 415d5a6a
Nothing to do. Sleeping until we see a request.
Thanks in advance for any help,
Matt
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
