Hi! I am running FreeRADIUS 1.0.1 and MySQL 4.1.7 on Redhat 9. The FreeRADIUS software was installed from an RPM package, which I created using the *.spec file included with the source code. Both Authentication and Accounting are working properly, with the one exception. One NAS, a Cisco PIX 525, is sending accounting packets containing multiple Cisco-AVPair attributes, as shown below:
Mon Nov 1 13:42:52 2004 Acct-Status-Type = Start NAS-Port = 208 NAS-IP-Address = 10.100.255.17 Login-IP-Host = 10.100.7.29 Login-TCP-Port = Telnet Acct-Session-Id = "0x0020b1f6" User-Name = "msahni" Cisco-AVPair = "ip:source-ip=10.100.255.98" Cisco-AVPair = "ip:source-port=2557" Cisco-AVPair = "ip:destination-ip=10.100.7.29" Cisco-AVPair = "ip:destination-port=23" Client-IP-Address = 10.100.255.17 Acct-Unique-Session-Id = "f189a9c186f55e4b" Timestamp = 1099338172 I wish to have the Cisco-AVPairs parsed into more 'normal' attributes, such as: ip:source-ip=10.100.255.98 ip:source-port=2557 ip:destination-ip=10.100.7.29 ip:destination-port=23 which I can then insert into my radacct table using sql.conf. To accomplish this, I've performed two specific actions: (1) I've set the "with_cisco_vsa_hack" option in the preprocess module to "yes" in the radiusd.conf file, and (2) I've added four attributes matching these names in the dictionary.cisco file, as shown below: ATTRIBUTE ip:source-ip 114 string Cisco ATTRIBUTE ip:source-port 115 string Cisco ATTRIBUTE ip:destination-ip 116 string Cisco ATTRIBUTE ip:destination-port 117 string Cisco This does not work, however. The detail log file does not show any additional attributes being created. In order to obtain any information from these attributes, I must reference them as "Cisco-AVPair" in my sql.conf file. This causes the information from the first attribute, ip:source-ip to be repeatedly entered into radacct as "ip:source-ip=3D10.100.255.98" (Note also the addition of the '3D' text!). I've tried referencing these attributes as "Cisco-AVPair[0]", "Cisco-AVPair[1]", etc... but this doesn't return anything. When running 'radiusd -X', the preprocess module returns "noop", which I think means that it doesn't think it needs to do anything? The entire debug info is shown below, and the radiusd.conf file is included in a second email (this one was too big). I've read the mailing list and everything else until I'm blue in the face, and I see where a lot of people seem to have the same or similar problem, but nowhere have I found a solution that works on my system. Please help... I'm desperate to get this working! Thanks!! radiusd -X debug: Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /etc/raddb/proxy.conf Config: including file: /etc/raddb/clients.conf Config: including file: /etc/raddb/snmp.conf Config: including file: /etc/raddb/eap.conf Config: including file: /etc/raddb/sql.conf main: prefix = "/usr" main: localstatedir = "/var" main: logdir = "/var/log/radius" main: libdir = "/usr/lib" main: radacctdir = "/var/log/radius/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/var/log/radius/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/var/run/radiusd/radiusd.pid" main: user = "radiusd" main: group = "radiusd" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = yes proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/lib Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "crypt" Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = no mschap: require_strong = no mschap: with_ntdomain_hack = no mschap: passwd = "(null)" mschap: authtype = "MS-CHAP" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded preprocess preprocess: huntgroups = "/etc/raddb/huntgroups" preprocess: hints = "/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = yes Module: Instantiated preprocess (preprocess) Module: Loaded SQL sql: driver = "rlm_sql_mysql" sql: server = "localhost" sql: port = "" sql: login = "radius" sql: password = "xxxxxxxx" sql: radius_db = "radius" sql: acct_table = "radacct" sql: acct_table2 = "radacct" sql: authcheck_table = "radcheck" sql: authreply_table = "radreply" sql: groupcheck_table = "radgroupcheck" sql: groupreply_table = "radgroupreply" sql: usergroup_table = "usergroup" sql: nas_table = "nas" sql: dict_table = "dictionary" sql: sqltrace = no sql: sqltracefile = "/var/log/radius/sqltrace.sql" sql: readclients = no sql: deletestalesessions = yes sql: num_sql_socks = 5 sql: sql_user_name = "%{User-Name}" sql: default_user_profile = "" sql: query_on_not_found = no sql: authorize_check_query = "SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id" sql: authorize_reply_query = "SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id" sql: authorize_group_check_query = "SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgrou pcheck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = '%{SQL-User-Name}' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id" sql: authorize_group_reply_query = "SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgrou preply.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE usergroup.Username = '%{SQL-User-Name}' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id" sql: accounting_onoff_query = "UPDATE radacct SET AcctStopTime='%S', AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime), AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time}' WHERE AcctSessionTime=0 AND AcctStopTime=0 AND NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'" sql: accounting_update_query = "UPDATE radacct ? SET FramedIPAddress = '%{Framed-IP-Address}', ? AcctSessionTime = '%{Acct-Session-Time}', ? AcctInputOctets = '%{Acct-Input-Octets}', ? AcctOutputOctets = '%{Acct-Output-Octets}' ? WHERE AcctSessionId = '%{Acct-Session-Id}' ? AND UserName = '%{SQL-User-Name}' ? AND NASIPAddress= '%{NAS-IP-Address}'" sql: accounting_update_query_alt = "INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S',INTERVAL (%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0}) SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0')" sql: accounting_start_query = "INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay, TunnelClientEndpoint, SourceIPAddress, DestinationIPAddress) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', '0', '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Acct-Delay-Time}', '0', '%{Tunnel-Client-Endpoint}', '%{Cisco-AVPair}', '%{Cisco-AVPair}')" sql: accounting_start_query_alt = "UPDATE radacct SET AcctStartTime = '%S', AcctStartDelay = '%{Acct-Delay-Time}', ConnectInfo_start = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'" sql: accounting_stop_query = "UPDATE radacct SET AcctStopTime = '%S', AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets = '%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}', AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time}', ConnectInfo_stop = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'" sql: accounting_stop_query_alt = "INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0}) SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{Acct-Delay-Time}')" sql: group_membership_query = "SELECT GroupName FROM usergroup WHERE UserName='%{SQL-User-Name}'" sql: connect_failure_retry_delay = 60 sql: simul_count_query = "" sql: simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName, NASIPAddress, NASPortId, FramedIPAddress, CallingStationId, FramedProtocol FROM radacct WHERE UserName='%{SQL-User-Name}' AND AcctStopTime = 0" sql: postauth_table = "radpostauth" sql: postauth_query = "INSERT into radpostauth (id, user, pass, reply, date) values ('', '%{User-Name}', '%{User-Password:-Chap-Password}', '%{reply:Packet-Type}', NOW())" sql: safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked rlm_sql (sql): Attempting to connect to [EMAIL PROTECTED]:/radius rlm_sql (sql): starting 0 rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 rlm_sql_mysql: Starting connect to MySQL server for #0 rlm_sql (sql): Connected new DB handle, #0 rlm_sql (sql): starting 1 rlm_sql (sql): Attempting to connect rlm_sql_mysql #1 rlm_sql_mysql: Starting connect to MySQL server for #1 rlm_sql (sql): Connected new DB handle, #1 rlm_sql (sql): starting 2 rlm_sql (sql): Attempting to connect rlm_sql_mysql #2 rlm_sql_mysql: Starting connect to MySQL server for #2 rlm_sql (sql): Connected new DB handle, #2 rlm_sql (sql): starting 3 rlm_sql (sql): Attempting to connect rlm_sql_mysql #3 rlm_sql_mysql: Starting connect to MySQL server for #3 rlm_sql (sql): Connected new DB handle, #3 rlm_sql (sql): starting 4 rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 rlm_sql_mysql: Starting connect to MySQL server for #4 rlm_sql (sql): Connected new DB handle, #4 Module: Instantiated sql (sql) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded detail detail: detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "/etc/shadow" unix: group = "(null)" unix: radwtmp = "/var/log/radius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded radutmp radutmp: filename = "/var/log/radius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Module: Loaded eap eap: default_eap_type = "md5" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Listening on authentication *:1812 Listening on accounting *:1813 Listening on proxy *:1814 Ready to process requests. rad_recv: Accounting-Request packet from host 10.100.255.17:1813, id=229, length=194 Acct-Status-Type = Start NAS-Port = 0 NAS-IP-Address = 10.100.255.17 Login-IP-Host = 10.100.248.2 Login-TCP-Port = 5962 Acct-Session-Id = "0x002339ee" User-Name = "" Cisco-AVPair = "ip:source-ip=10.100.248.2" Cisco-AVPair = "ip:source-port=4385" Cisco-AVPair = "ip:destination-ip=10.100.255.2" Cisco-AVPair = "ip:destination-port=5962" Processing the preacct section of radiusd.conf modcall: entering group preacct for request 3 modcall[preacct]: module "preprocess" returns noop for request 3 rlm_acct_unique: Hashing 'NAS-Port = 0,Client-IP-Address = 10.100.255.17,NAS-IP-Address = 10.100.255.17,Acct-Session-Id = "0x002339ee",User-Name = ""' rlm_acct_unique: Acct-Unique-Session-ID = "80142e378dd3cad0". modcall[preacct]: module "acct_unique" returns ok for request 3 modcall: group preacct returns ok for request 3 Processing the accounting section of radiusd.conf modcall: entering group accounting for request 3 radius_xlat: '/var/log/radius/radacct/10.100.255.17/detail-20041104' rlm_detail: /var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /var/log/radius/radacct/10.100.255.17/detail-20041104 modcall[accounting]: module "detail" returns ok for request 3 modcall[accounting]: module "unix" returns ok for request 3 radius_xlat: '/var/log/radius/radutmp' radius_xlat: '' modcall[accounting]: module "radutmp" returns ok for request 3 radius_xlat: '' radius_xlat: 'INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay, TunnelClientEndpoint, SourceIPAddress, DestinationIPAddress) values('0x002339ee', '80142e378dd3cad0', '', '', '10.100.255.17', '0', '', '2004-11-04 13:01:16', '0', '0', '', '', '', '0', '0', '', '', '', '', '', '', '', '0', '', 'ip:source-ip=3D10.100.248.2', 'ip:source-ip=3D10.100.248.2')' rlm_sql (sql): Reserving sql socket id: 1 rlm_sql (sql): Released sql socket id: 1 modcall[accounting]: module "sql" returns ok for request 3 modcall: group accounting returns ok for request 3 Sending Accounting-Response of id 229 to 10.100.255.17:1813 Finished request 3 Going to the next request --- Walking the entire request list --- Cleaning up request 3 ID 229 with timestamp 418a7c7c Waking up in 1 seconds... --- Walking the entire request list --- Cleaning up request 2 ID 58 with timestamp 418a7c77 Nothing to do. Sleeping until we see a request. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html