Hi Alan, Thanks for the help, I found my problem. I didn't have Service-Type = Framed-User, as a reply item. Everything seems to be working fine now.
Kind Regards Stephan -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alan DeKok Sent: Monday, November 15, 2004 10:19 PM To: [EMAIL PROTECTED] Subject: Re: Cisco router with Async dialup modem setup... "Steph" <[EMAIL PROTECTED]> wrote: > I'm busy setting up a Dialup system for a few users using a Cisco router > with an Async 32A module connected to 32 U.S. Robotics 56K Faxmodems. My > problem is that when I try and authenticate the user against Radius I > get "Access was denied because username and/or password were invalid on > the domain" but when I try and authenticate the user locally without > using radius it works fine. I'm quite sure my radius is configured > correctly since I have another dialup system authenticating against it > which works fine. Here's the debugging info I'm getting from radius No, it's not. You deleted large portions of the debug output. Send a debug output where the user is rejected. Send ALL of the debug output. If you were familiar enough with the server to figure out what's going wrong, you could delete the unimportant pieces from it. Since you don't know what's important in the debug output, don't delete ANYTHING from it. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html