From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Zachary Fortna
Sent: 09 December 2004 14:24
To: '[EMAIL PROTECTED]'
Subject: freeRADIUS 1.0.1 and Cisco PIX 515 version 6.1
We recently migrated over to freeRADIUS 1.0.1 (Redhat ES 3 RPM) from Steel Belted RADIUS for authentication of our VPN. I set it up to use System authentication, and it works like a charm for a day or two, but then all of a sudden just stops. It appears that the PIX is no longer sending the access request packet to the RADIUS server which causes the problem. Using radtest works just fine and I receive the Access Request Packet. If we switch the PIX back to using Steel Belted RADIUS everything works fine. Has anyone run into a problem like this? Any ideas, as according to the guy who runs the PIX, everything is running fine there.
Zachary Fortna, DAD
Technical Specialist
CXtec
315.476.3000, ext 2570
fax: 315.455.1800
CXtec (formerly CABLExpress Technologies) is a DBA of Cablexpress Corporation. Visit us online at www.cxtec.com.
------------------------------------------------------------------------Confidentiality Note: The information contained in this email and
document(s) attached are for the exclusive use of the addressee and may
contain confidential, privileged and non-disclosable information. If the
recipient of this email is not the addressee, such recipient is strictly
prohibited from reading, photocopying, distribution or otherwise using this
email or its contents in any way. Please notify the Sapiens (UK) Ltd.
Systems Administrator via e-mail immediately at
[EMAIL PROTECTED], if you have received this email in error.
Disclaimer: The views, opinions and guidelines contained in this
confidential e-mail are those of the originating author and may not be
representative of Sapiens (UK) Ltd.
------------------------------------------------------------------------
