Hello all,
The following are the info that I've got from the freeradius. 1.0.1 (on FC2)
The configuration is sure that eap is able to over cable (Wire) env.
I've no idea on EAP-TTLS.
Thank You I'll need some help.
rad_recv: Access-Request packet from host 192.168.0.151:1031, id=0,
length=226
Message-Authenticator = 0x32840b7c473e42b5880b1ef4fd70fb03
Service-Type = Framed-User
User-Name = "[EMAIL PROTECTED]"
Framed-MTU = 1488
Called-Station-Id = "00-0F-3D-FD-C0-CB:OCETEST"
Calling-Station-Id = "00-02-6F-22-30-99"
NAS-Identifier = "D-link Corp. Access Point"
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 54Mbps 802.11g"
EAP-Message = 0x020000180164636d776169406f636573622e636f6d2e6d79
NAS-IP-Address = 192.168.0.151
NAS-Port = 1
NAS-Port-Id = "STA port # 1"
rad_lowerpair: User-Name now '[EMAIL PROTECTED]'
rad_rmspace_pair: User-Name now '[EMAIL PROTECTED]'
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 22
modcall[authorize]: module "preprocess" returns ok for request 22
modcall[authorize]: module "chap" returns noop for request 22
modcall[authorize]: module "mschap" returns noop for request 22
rlm_realm: Looking up realm "ocesb.com.my" for User-Name =
"[EMAIL PROTECTED]"
rlm_realm: Found realm "ocesb.com.my"
rlm_realm: Adding Stripped-User-Name = "dcmwai"
rlm_realm: Proxying request from user dcmwai to realm ocesb.com.my
rlm_realm: Adding Realm = "ocesb.com.my"
rlm_realm: Authentication realm is LOCAL.
modcall[authorize]: module "suffix" returns noop for request 22
rlm_eap: EAP packet type response id 0 length 24
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 22
users: Matched DEFAULT at 152
users: Matched DEFAULT at 171
modcall[authorize]: module "files" returns ok for request 22
modcall: group authorize returns updated for request 22
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 22
rlm_eap: EAP Identity
rlm_eap: processing type md5
rlm_eap_md5: Issuing Challenge
modcall[authenticate]: module "eap" returns handled for request 22
modcall: group authenticate returns handled for request 22
Sending Access-Challenge of id 0 to 192.168.0.151:1031
Service-Type = Framed-User
EAP-Message = 0x010100160410d4427ee797e34a27019d84dcac98ece9
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xdea1b032547acc60c07bfefa20d78f0e
Finished request 22
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.0.151:1031, id=1,
length=242
Message-Authenticator = 0x89cda612fb41cae97ee4015900acb967
Service-Type = Framed-User
User-Name = "[EMAIL PROTECTED]"
Framed-MTU = 1488
State = 0xdea1b032547acc60c07bfefa20d78f0e
Called-Station-Id = "00-0F-3D-FD-C0-CB:OCETEST"
Calling-Station-Id = "00-02-6F-22-30-99"
NAS-Identifier = "D-link Corp. Access Point"
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 54Mbps 802.11g"
EAP-Message = 0x020100160410413809d6a421d043b37db6767fad83a0
NAS-IP-Address = 192.168.0.151
NAS-Port = 1
NAS-Port-Id = "STA port # 1"
rad_lowerpair: User-Name now '[EMAIL PROTECTED]'
rad_rmspace_pair: User-Name now '[EMAIL PROTECTED]'
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 23
modcall[authorize]: module "preprocess" returns ok for request 23
modcall[authorize]: module "chap" returns noop for request 23
modcall[authorize]: module "mschap" returns noop for request 23
rlm_realm: Looking up realm "ocesb.com.my" for User-Name =
"[EMAIL PROTECTED]"
rlm_realm: Found realm "ocesb.com.my"
rlm_realm: Adding Stripped-User-Name = "dcmwai"
rlm_realm: Proxying request from user dcmwai to realm ocesb.com.my
rlm_realm: Adding Realm = "ocesb.com.my"
rlm_realm: Authentication realm is LOCAL.
modcall[authorize]: module "suffix" returns noop for request 23
rlm_eap: EAP packet type response id 1 length 22
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 23
users: Matched DEFAULT at 152
users: Matched DEFAULT at 171
modcall[authorize]: module "files" returns ok for request 23
modcall: group authorize returns updated for request 23
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 23
rlm_eap: Request found, released from the list
rlm_eap: EAP/md5
rlm_eap: processing type md5
rlm_eap_md5: User-Password is required for EAP-MD5 authentication
rlm_eap: Handler failed in EAP/md5
rlm_eap: Failed in EAP select
modcall[authenticate]: module "eap" returns invalid for request 23
modcall: group authenticate returns invalid for request 23
auth: Failed to validate the user.
Login incorrect: [EMAIL PROTECTED]/<no User-Password attribute>]
(from client localnetwork port 1 cli 00-02-6F-22-30-99)
Delaying request 23 for 1 seconds
Finished request 23
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.0.151:1031, id=1,
length=242
Sending Access-Reject of id 1 to 192.168.0.151:1031
EAP-Message = 0x04010004
Message-Authenticator = 0x00000000000000000000000000000000
--- Walking the entire request list ---
Waking up in 3 seconds...
--- Walking the entire request list ---
Cleaning up request 22 ID 0 with timestamp 41ee1d37
Cleaning up request 23 ID 1 with timestamp 41ee1d37
Nothing to do. Sleeping until we see a request.
begin:vcard
fn:Chan Min Wai
n:Min Wai;Chan
org:Optical Communication Engineering Sdn Bhd;IT Department
adr:;;19, Jalan Semanget, ;Petaling Jaya;Selangor Darul Ehsan;46200;Malaysia
email;internet:[EMAIL PROTECTED]
title:System Admin
tel;work:+603-79578730
tel;fax:+603-79570669
x-mozilla-html:FALSE
url:http://www.ocesb.com.my
version:2.1
end:vcard
