Alan,

This is not causing me a problem at all.  I was just wondering what I
had wrong in my configuration to cause it to happen.


Martin




5.44.  Table of Attributes

   The following table provides a guide to which attributes may be found
   in which kinds of packets, and in what quantity.

   Request   Accept   Reject   Challenge   #    Attribute
   0-1       0-1      0        0            1   User-Name
   0-1       0        0        0            2   User-Password [Note 1]
   0-1       0        0        0            3   CHAP-Password [Note 1]
   0-1       0        0        0            4   NAS-IP-Address [Note 2]
   0-1       0        0        0            5   NAS-Port
   0-1       0-1      0        0            6   Service-Type
   0-1       0-1      0        0            7   Framed-Protocol
   0-1       0-1      0        0            8   Framed-IP-Address
   0-1       0-1      0        0            9   Framed-IP-Netmask
   0         0-1      0        0           10   Framed-Routing
   0         0+       0        0           11   Filter-Id
   0-1       0-1      0        0           12   Framed-MTU
   0+        0+       0        0           13   Framed-Compression
   0+        0+       0        0           14   Login-IP-Host
   0         0-1      0        0           15   Login-Service
   0         0-1      0        0           16   Login-TCP-Port
   0         0+       0+       0+          18   Reply-Message
   0-1       0-1      0        0           19   Callback-Number
   0         0-1      0        0           20   Callback-Id
   0         0+       0        0           22   Framed-Route
   0         0-1      0        0           23   Framed-IPX-Network
   0-1       0-1      0        0-1         24   State [Note 1]
   0         0+       0        0           25   Class
   0+        0+       0        0+          26   Vendor-Specific
   0         0-1      0        0-1         27   Session-Timeout
   0         0-1      0        0-1         28   Idle-Timeout
   0         0-1      0        0           29   Termination-Action
   0-1       0        0        0           30   Called-Station-Id
   0-1       0        0        0           31   Calling-Station-Id
   0-1       0        0        0           32   NAS-Identifier [Note 2]
   0+        0+       0+       0+          33   Proxy-State
   0-1       0-1      0        0           34   Login-LAT-Service
   0-1       0-1      0        0           35   Login-LAT-Node



Rigney, et al.              Standards Track                    [Page 63]


RFC 2865                         RADIUS                        June 2000


   0-1       0-1      0        0           36   Login-LAT-Group
   0         0-1      0        0           37   Framed-AppleTalk-Link
   0         0+       0        0           38   Framed-AppleTalk-Network
   0         0-1      0        0           39   Framed-AppleTalk-Zone
   0-1       0        0        0           60   CHAP-Challenge
   0-1       0        0        0           61   NAS-Port-Type
   0-1       0-1      0        0           62   Port-Limit
   0-1       0-1      0        0           63   Login-LAT-Port
   Request   Accept   Reject   Challenge   #    Attribute

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Alan
DeKok
Sent: 21 January 2005 15:40
To: freeradius-users@lists.freeradius.org
Subject: Re: EAP-MD5 Access Challenge. 

<[EMAIL PROTECTED]> wrote:
> It is causing me a problem it is just not what is supposed to happen I
> think.

  What in the documentation led you to think that?

  Alan DeKok.

- 
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html



-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

Reply via email to