Hello. > I'm new to FreeRadius. I've recently setup a FreeRadius server, > noting that ports 1645, 1812, and 1813 were in use. Based on the > information that I've read thus far, dialupadmin is included with > FreeRadius, but I'm stumped on how to access the Web interface. I've > directed the Web browser at all the listed ports above to no success.
dialup_admin is a tool that you must embed into a running HTTP server like Apache. It will then run on the web server's port (usually 80) and be accessible as a directory on that server. Sending HTTP requests to the Radius ports won't gain you anything. Except that you penetrate the server with malformed RADIUS packets. Greetings, Stefan Winter -- Stefan WINTER Fondation RESTENA - Réseau Téléinformatique de l'Education Nationale et de la Recherche Ingénieur réseau et système 6, rue Richard Coudenhove-Kalergi L-1359 Luxembourg email: [EMAIL PROTECTED] tél.: +352 424409-33 http://www.restena.lu fax: +352 422473 - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html