>From what you posted there is no dash in the User-Name or password. On Sun, 2005-01-30 at 13:40, Robert Ku wrote: > Hello > > I have posted a topic with my problem with mac authentication before > using a Cisco C3550 switch as its authenticator. I now tested the mac > authentication with Cisco Aironet 1200 AP. > > in users: > 000e35-4bcf5d Auth-Type:=Local, User-Password == "000e35-4bcf5d" > also tried: > 000e35-4bcf5d Auth-Type:=Local, User-Password == "secretpass" > > in the eap.conf : > default_eap_type = leap > > clients.conf: > clients 10.19.50.18 { //Aironet 1200 IP > secret = secretpass > shortname = ap > nastype = cisco > > This is my output when I ran radiusd -Xy > > Listening on authentication *:1812 > Listening on accounting *:1813 > Listening on proxy *:1814 > Ready to process requests. > rad_recv: Access-Request packet from host 10.19.50.18:1536, id=17, length=130 > User-Name = "000e354bcf5d" > User-Password = "000e354bcf5d" > NAS-IP-Address = 10.19.50.18 > Called-Station-Id = "000c853e2200" > NAS-Port = 37 > NAS-Port-Type = Wireless-802.11 > Cisco-AVPair = "ssid=rccd" > Calling-Station-Id = "000e354bcf5d" > NAS-Identifier = "AP1200-3e2200" > Processing the authorize section of radiusd.conf > modcall: entering group authorize for request 0 > modcall[authorize]: module "preprocess" returns ok for request 0 > modcall[authorize]: module "chap" returns noop for request 0 > modcall[authorize]: module "mschap" returns noop for request 0 > rlm_realm: No '@' in User-Name = "000e354bcf5d", looking up realm NULL > rlm_realm: No such realm "NULL" > modcall[authorize]: module "suffix" returns noop for request 0 > rlm_eap: No EAP-Message, not doing EAP > modcall[authorize]: module "eap" returns noop for request 0 > modcall[authorize]: module "files" returns notfound for request 0 > modcall: group authorize returns ok for request 0 > auth: No authenticate method (Auth-Type) configuration found for the > request: Rejecting the user > auth: Failed to validate the user. > Delaying request 0 for 1 seconds > Finished request 0 > Going to the next request > --- Walking the entire request list --- > > How come freeradius cannot find an authentication method > configuration? I do have a default configuration type in the eap.conf > file set and I check that the path to eap.conf file is included in > radiusd.conf. Thanks for any responses. > > Robert > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html