Who/What is doing the NAT and where is that in relation to the wireless access point and the radius server?
Lyle ----- Original Message ----- From: "Peeyush sharma" <[EMAIL PROTECTED]> To: <freeradius-users@lists.freeradius.org> Sent: Saturday, February 05, 2005 7:35 PM Subject: Radtest problem > Hi all, > I am a new user here. Infact this is my first > email as I am just beginning to use freeradius. I am > trying to run the Radius server and client in the same > system but the server on wired LAN and the client on > wireless. I am having some problem which I am > mentioning below. It should be something very basic > that I am ignoring. For any help many thanks in > advance. > > So here is the problem. The Radius server(wired) is > running on 152.15.103.195 and the client I am using > has the address 192.168.13.22. > > I made the server run on the 152... address by > changing the radiusd.conf file and added the entry for > wireless client 192... in the clients.conf file. > > My default route is set through wireless so that a > request can be sent out. Now I give the following > command. 'radtest123' is the user's password and the > 'testing123-1' is the shared secret defined for the > client in the client.conf file. > > ***** > Command Prompt# radtest someone radtest123 > 152.15.103.195 10 testing123-1 > Sending Access-Request of id 232 to > 152.15.103.195:1812 > User-Name = "someone" > User-Password = "radtest123" > NAS-IP-Address = something > NAS-Port = 10 > Re-sending Access-Request of id 232 to > 152.15.103.195:1812 > User-Name = "someone" > User-Password = > "gB>\021\3642M\251\363\027\376\212\364\237\267\315" > NAS-IP-Address = something > NAS-Port = 10 > ***** > and this Re-sending keeps repeating until time-out > occurs. > > Following is the server's output in radiusd -X. > ***** > Listening on authentication 152.15.103.195:1812 > Listening on accounting 152.15.103.195:1813 > Listening on proxy 152.15.103.195:1814 > Ready to process requests. > rad_recv: Access-Request packet from host > 152.15.103.195:32775, id=232, length=59 > Ignoring request from unknown client > 152.15.103.195:32775 > ****** > > I understand that this error is coming becuase of > address 152.15... not being defined in the > clients.conf file. But in that file we define the > address of the client and not the server and IP > address in the radtest command stands for the server > not the client. > Now what I am failing to understand is that if my > wireless client is sending the request then the server > should have 192.168.13.22 as the host from which the > request has been received, then why it is having > 152.15.... as the sender's address. > I am sure becuase of the tcpdump command output > that the wireless client is the default outgoing > source and thus the request must come from the > 192.168... and not from 152.15.... > > Something very basic is wrong, any help will be > wonderful. > > Thanks. > --Peeyush > > > > > > __________________________________ > Do you Yahoo!? > All your favorites on one personal page - Try My Yahoo! > http://my.yahoo.com > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
