Hi All,
I use freeradius 1.0.2 in Eap-peap.
My configuration hardware is: PDA --> AP Cisco ---> Freeradius
Not of error on the log but i have a popup on the PDA saying the
certificate of the server has been emitted by a not recognized
authority.
I seek of the assistance for resoudre this problem.
Thank you
DEBUG RADIUSD
rad_recv: Access-Request packet from host 200.0.110.200:21648, id=215,
length=128
User-Name = "test"
Framed-MTU = 1400
Called-Station-Id = "000d.eded.7584"
Calling-Station-Id = "0009.2d0e.04fa"
Service-Type = Login-User
Message-Authenticator = 0x358c7b0ebe6573ba05f5c2e084f3d7ef
EAP-Message = 0x020200090174657374
NAS-Port-Type = Wireless-802.11
NAS-Port = 397
NAS-IP-Address = 200.0.110.200
NAS-Identifier = "AP_Radius"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
modcall[authorize]: module "chap" returns noop for request 0
modcall[authorize]: module "mschap" returns noop for request 0
rlm_realm: No '@' in User-Name = "test", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 0
rlm_eap: EAP packet type response id 2 length 9
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 0
users: Matched entry test at line 101
modcall[authorize]: module "files" returns ok for request 0
modcall: group authorize returns updated for request 0
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
rlm_eap: EAP Identity
rlm_eap: processing type leap
rlm_eap_leap: Stage 2
rlm_eap_leap: Issuing AP Challenge
rlm_eap_leap: Successfully initiated
modcall[authenticate]: module "eap" returns handled for request 0
modcall: group authenticate returns handled for request 0
Sending Access-Challenge of id 215 to 200.0.110.200:21648
Session-Timeout = 300
EAP-Message = 0x01030014110100082d241bf341b8c2c074657374
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x1a3795c32d1db2da2242d38b72c91043
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 200.0.110.200:21648, id=216,
length=143
User-Name = "test"
Framed-MTU = 1400
Called-Station-Id = "000d.eded.7584"
Calling-Station-Id = "0009.2d0e.04fa"
Service-Type = Login-User
Message-Authenticator = 0x374fff6dc6459f6b817b7e3c13c87f18
EAP-Message = 0x020300060319
NAS-Port-Type = Wireless-802.11
NAS-Port = 397
State = 0x1a3795c32d1db2da2242d38b72c91043
NAS-IP-Address = 200.0.110.200
NAS-Identifier = "AP_Radius"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 1
modcall[authorize]: module "preprocess" returns ok for request 1
modcall[authorize]: module "chap" returns noop for request 1
modcall[authorize]: module "mschap" returns noop for request 1
rlm_realm: No '@' in User-Name = "test", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 1
rlm_eap: EAP packet type response id 3 length 6
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 1
users: Matched entry test at line 101
modcall[authorize]: module "files" returns ok for request 1
modcall: group authorize returns updated for request 1
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 1
rlm_eap: Request found, released from the list
rlm_eap: EAP NAK
rlm_eap: EAP-NAK asked for EAP-Type/peap
rlm_eap: processing type tls
rlm_eap_tls: Initiate
rlm_eap_tls: Start returned 1
modcall[authenticate]: module "eap" returns handled for request 1
modcall: group authenticate returns handled for request 1
Sending Access-Challenge of id 216 to 200.0.110.200:21648
Session-Timeout = 300
EAP-Message = 0x010400061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x720ea633f1a2de66493335dec1c45ec1
Finished request 1
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 200.0.110.200:21648, id=217,
length=211
User-Name = "test"
Framed-MTU = 1400
Called-Station-Id = "000d.eded.7584"
Calling-Station-Id = "0009.2d0e.04fa"
Service-Type = Login-User
Message-Authenticator = 0x3bd35bde6cfe2816e4cbc3f40965d3b8
EAP-Message =
0x0204004a198000000040160301003b0100003703012c549198c002e1866330b34937e69b9afad1e61c3e2937b5daf67c95a1374f8800001000040005000a000900640062000300060100
NAS-Port-Type = Wireless-802.11
NAS-Port = 397
State = 0x720ea633f1a2de66493335dec1c45ec1
NAS-IP-Address = 200.0.110.200
NAS-Identifier = "AP_Radius"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 2
modcall[authorize]: module "preprocess" returns ok for request 2
modcall[authorize]: module "chap" returns noop for request 2
modcall[authorize]: module "mschap" returns noop for request 2
rlm_realm: No '@' in User-Name = "test", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 2
rlm_eap: EAP packet type response id 4 length 74
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 2
users: Matched entry test at line 101
modcall[authorize]: module "files" returns ok for request 2
modcall: group authorize returns updated for request 2
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 2
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Length Included
eaptls_verify returned 11
(other): before/accept initialization
TLS_accept: before/accept initialization
rlm_eap_tls: <<< TLS 1.0 Handshake [length 003b], ClientHello
TLS_accept: SSLv3 read client hello A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello
TLS_accept: SSLv3 write server hello A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 0694], Certificate
TLS_accept: SSLv3 write certificate A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
TLS_accept: SSLv3 write server done A
TLS_accept: SSLv3 flush data
TLS_accept:error in SSLv3 read client certificate A
In SSL Handshake Phase
In SSL Accept mode
eaptls_process returned 13
rlm_eap_peap: EAPTLS_HANDLED
modcall[authenticate]: module "eap" returns handled for request 2
modcall: group authenticate returns handled for request 2
Sending Access-Challenge of id 217 to 200.0.110.200:21648
Session-Timeout = 300
EAP-Message =
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
EAP-Message =
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
EAP-Message =
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
EAP-Message =
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
EAP-Message = 0x652e636f6d301e170d3034303132353133323630375a
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x762c6e7163dd913f831068176c4b3414
Finished request 2
Going to the next request
--- Walking the entire request list ---
Waking up in 5 seconds...
rad_recv: Access-Request packet from host 200.0.110.200:21648, id=218,
length=143
User-Name = "test"
Framed-MTU = 1400
Called-Station-Id = "000d.eded.7584"
Calling-Station-Id = "0009.2d0e.04fa"
Service-Type = Login-User
Message-Authenticator = 0xb27cfd65a083929aeaf799fecc193c4b
EAP-Message = 0x020500061900
NAS-Port-Type = Wireless-802.11
NAS-Port = 397
State = 0x762c6e7163dd913f831068176c4b3414
NAS-IP-Address = 200.0.110.200
NAS-Identifier = "AP_Radius"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 3
modcall[authorize]: module "preprocess" returns ok for request 3
modcall[authorize]: module "chap" returns noop for request 3
modcall[authorize]: module "mschap" returns noop for request 3
rlm_realm: No '@' in User-Name = "test", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 3
rlm_eap: EAP packet type response id 5 length 6
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 3
users: Matched entry test at line 101
modcall[authorize]: module "files" returns ok for request 3
modcall: group authorize returns updated for request 3
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 3
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
rlm_eap_tls: ack handshake fragment handler
eaptls_verify returned 1
eaptls_process returned 13
rlm_eap_peap: EAPTLS_HANDLED
modcall[authenticate]: module "eap" returns handled for request 3
modcall: group authenticate returns handled for request 3
Sending Access-Challenge of id 218 to 200.0.110.200:21648
Session-Timeout = 300
EAP-Message =
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
EAP-Message =
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
EAP-Message =
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
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x4d5c9c26820055e347351e4d3f2922ff
Finished request 3
Going to the next request
Waking up in 5 seconds...
rad_recv: Access-Request packet from host 200.0.110.200:21648, id=219,
length=329
User-Name = "test"
Framed-MTU = 1400
Called-Station-Id = "000d.eded.7584"
Calling-Station-Id = "0009.2d0e.04fa"
Service-Type = Login-User
Message-Authenticator = 0xc83c5968de899bf7c818c5d0fb699299
EAP-Message =
0x020600c01980000000b616030100861000008200804682efe5795273cc735211156b2fdacf0c2ad8cf9174949c9b9eb5ea4c1f687cf120cb5b87383ff380106cbbcf9c770b2c7f8c54c7842fddb8ea1b38473ba75a1c4daa4bf816adb30447c69cf17c0ba6cb12241115454a0a4c736b711d174f5a13c675bc2f2d5651beafeabc0345984268c4333690f6ee131b76017bfbffb52d1403010001011603010020e618113900e34b221450a0b888d4064234ec0a9199b9774278b6779fc0a495b5
NAS-Port-Type = Wireless-802.11
NAS-Port = 397
State = 0x4d5c9c26820055e347351e4d3f2922ff
NAS-IP-Address = 200.0.110.200
NAS-Identifier = "AP_Radius"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 4
modcall[authorize]: module "preprocess" returns ok for request 4
modcall[authorize]: module "chap" returns noop for request 4
modcall[authorize]: module "mschap" returns noop for request 4
rlm_realm: No '@' in User-Name = "test", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 4
rlm_eap: EAP packet type response id 6 length 192
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 4
users: Matched entry test at line 101
modcall[authorize]: module "files" returns ok for request 4
modcall: group authorize returns updated for request 4
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 4
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Length Included
eaptls_verify returned 11
rlm_eap_tls: <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange
TLS_accept: SSLv3 read client key exchange A
rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001]
rlm_eap_tls: <<< TLS 1.0 Handshake [length 0010], Finished
TLS_accept: SSLv3 read finished A
rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001]
TLS_accept: SSLv3 write change cipher spec A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished
TLS_accept: SSLv3 write finished A
TLS_accept: SSLv3 flush data
(other): SSL negotiation finished successfully
SSL Connection Established
eaptls_process returned 13
rlm_eap_peap: EAPTLS_HANDLED
modcall[authenticate]: module "eap" returns handled for request 4
modcall: group authenticate returns handled for request 4
Sending Access-Challenge of id 219 to 200.0.110.200:21648
Session-Timeout = 300
EAP-Message =
0x0107003119001403010001011603010020474a385498db8b0f1bb2a1aa875509aeaf5c1f6f0f0fd54912ca3b1755536829
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x5e4dd02ddc4a554410b73aa63f9bbe7a
Finished request 4
Patrice PAPOT
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
