hello can you explain me in detail...where to make change.. Thanks....
-----Original Message----- From: Murali Krishna G <[EMAIL PROTECTED]> To: freeradius-users@lists.freeradius.org Date: Fri, 04 Mar 2005 12:24:47 +0530 Subject: Re: freeradius conf. > Hello, > > Check out Stefan's solution for this :: its working for me. > > >> modcall[authorize]: module "files" returns ok for request 0 > >> modcall: group authorize returns ok for request 0 > >> rad_check_password: Found Auth-Type System > >> auth: type "System" > > > > > > Stefan Winter : > > how about omitting Auth-Type := System? The files section already > properly > authorized your user, but the later checks with Auth-Type System led to > the > failure. > > > Bye > Murali. > > > > Pradeep Nevatia wrote: > > >dear please help me out where i have to make change & in wich conf. > fils > > > >pradeep.. > > > >-----Original Message----- > >From: Doug Hardie <[EMAIL PROTECTED]> > >To: freeradius-users@lists.freeradius.org > >Date: Wed, 2 Mar 2005 23:12:29 -0800 > >Subject: Re: freeradius conf. > > > > > > > >>> rad_check_password: Found Auth-Type System > >>>rlm_unix: [pradeep]: invalid password > >>> > >>> > >>You are configured for Unix password validatation and the password > you > >>gave is not the one the system has for that user id. > >> > >> > >>On Mar 2, 2005, at 23:10, Pradeep Nevatia wrote: > >> > >> > >> > >>>Dear i haven't solved my problem please help me out.. > >>> > >>>pradeep.. > >>>======================================================== > >>> > >>> > >>>Dear > >>> > >>>Recently I have installed freeradius (freeradius-0.9.3-1.i386.rpm),i > >>>have > >>>some problem in password auth. > >>>i have created new user:pradeep with pass:123456 > >>> > >>>when i tried to test the auth. enabling Debug mod. > >>>using command > radtest pradeep 123456 localhost:1812 0 testing123 > >>> > >>>it generate following massage : > >>>================================================================ > >>> > >>>rad_recv: Access-Request packet from host 127.0.0.1:32783, id=176, > >>>length=59 > >>> User-Name = "pradeep" > >>> User-Password = "123456" > >>> NAS-IP-Address = 255.255.255.255 > >>> NAS-Port = 0 > >>>modcall: entering group authorize for request 1 > >>> modcall[authorize]: module "preprocess" returns ok for request 1 > >>> modcall[authorize]: module "chap" returns noop for request 1 > >>> modcall[authorize]: module "eap" returns noop for request 1 > >>> rlm_realm: No '@' in User-Name = "pradeep", looking up realm > NULL > >>> rlm_realm: No such realm "NULL" > >>> modcall[authorize]: module "suffix" returns noop for request 1 > >>> users: Matched DEFAULT at 152 > >>> modcall[authorize]: module "files" returns ok for request 1 > >>> modcall[authorize]: module "mschap" returns noop for request 1 > >>>modcall: group authorize returns ok for request 1 > >>> rad_check_password: Found Auth-Type System > >>>auth: type "System" > >>>modcall: entering group authenticate for request 1 > >>>rlm_unix: [pradeep]: invalid password > >>> modcall[authenticate]: module "unix" returns reject for request 1 > >>>modcall: group authenticate returns reject for request 1 > >>>auth: Failed to validate the user. > >>>Delaying request 1 for 1 seconds > >>>Finished request 1 > >>> > >>> > >>> > >>===================================================================== > = > >> > >> > >>>Please help me where i have made mistake in conf. > >>> > >>>Regards > >>>Pradeep.. > >>> > >>> > >>>- > >>>List info/subscribe/unsubscribe? See > >>>http://www.freeradius.org/list/users.html > >>> > >>> > >>> > >>- > >>List info/subscribe/unsubscribe? See > >>http://www.freeradius.org/list/users.html > >> > >> > > > > > >- > >List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > > > > > > > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html