Alan,
Thanks! Here is a better excerp. The "00-01-f4-ec-97-29" is not in
/etc/passwd is from the section trying to validate by mac address. We need
this to validate printers.
rad_recv: Access-Request packet from host 149.158.3.250:1651, id=232,
length=108
Message-Authenticator = 0x26921ca4713a8050cfbd9339f8341564
User-Name = "kmnradius"
NAS-IP-Address = 149.158.3.250
NAS-Port = 2
NAS-Port-Type = Wireless-802.11
Calling-Station-Id = "00-01-f4-ec-97-29"
EAP-Message = 0x0201000e016b6d6e726164697573
Framed-MTU = 1000
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 31
modcall[authorize]: module "preprocess" returns ok for request 31
modcall[authorize]: module "chap" returns noop for request 31
modcall[authorize]: module "mschap" returns noop for request 31
rlm_realm: No '@' in User-Name = "kmnradius", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 31
rlm_eap: EAP packet type response id 1 length 14
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 31
users: Matched entry DEFAULT at line 155
modcall[authorize]: module "files" returns ok for request 31
modcall: group authorize returns updated for request 31
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 31
rlm_eap: EAP Identity
rlm_eap: processing type tls
rlm_eap_tls: Initiate
rlm_eap_tls: Start returned 1
modcall[authenticate]: module "eap" returns handled for request 31
modcall: group authenticate returns handled for request 31
Sending Access-Challenge of id 232 to 149.158.3.250:1651
EAP-Message = 0x010200061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x5599c28ab72f3dfde79ae5c18602a18a
Finished request 31
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
Thnaks
Bill
> -----Original Message-----
> From: Alan DeKok [mailto:[EMAIL PROTECTED]
> Sent: Friday, March 11, 2005 1:20 PM
> To: freeradius-users@lists.freeradius.org
> Subject: Re: Validating using EAP TLS
>
>
> "Stewart, Bill" <[EMAIL PROTECTED]> wrote:
> > We still do not get a connection. Following is an excerpt from
> > radiusd -X Can anyone give me idea what is going on?
>
> The client isn't doing EAP-TLS. There's no mention of it in the
> debug log.
>
> > rad_check_password: Found Auth-Type System
> > auth: type "System"
> > Processing the authenticate section of radiusd.conf
> > modcall: entering group authenticate for request 34
> > modcall[authenticate]: module "unix" returns notfound for
> request 34
>
> The user "00-01-f4-ec-97-29" is not in /etc/passwd. I'm
> not surprised.
>
> Alan DeKok.
>
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
