Access accept but still can't work

[Chia-Ming]

Hi, I used Windows zeroConfig to test PEAP To see captured packet on my Freeradius server,    (Server is 172.16.254.12, and AP's address is 172.19.0.10)    I found the last packet is "Access Accept". But in Zeroconfig, the status is always in "Attempting to authenticate" The following is the "Access accept" packet, any ideas? B.R        Chia-Ming ==== No.     Time        Source                Destination           Protocol Info     420 6.233687    172.16.254.12         172.19.0.10           RADIUS   Access Accept(2) (id=67, l=180)   Frame 420 (222 bytes on wire, 222 bytes captured) Ethernet II, Src: 00:0c:29:96:f6:17, Dst: 00:0e:62:8b:80:06 Internet Protocol, Src Addr: 172.16.254.12 (172.16.254.12), Dst Addr: 172.19.0.10 (172.19.0.10) User Datagram Protocol, Src Port: radius (1812), Dst Port: radius (1812) Radius Protocol     Code: Access Accept (2)     Packet identifier: 0x43 (67)     Length: 180     Authenticator: 0xC04F3E30EEEE8CCA5DCBC76EA4591E0D     Attribute value pairs         t:Called Station Id(30) l:9, Value:"RSNA:N1"         t:Tunnel Private Group ID(81) l:6, Value:"RSNA"         t:Vendor Specific(26) l:58, Vendor:Microsoft(311)             t:MS MPPE Recv Key(17) l:52, Value:B4F480BECAA14ED0AC933ABEFB28965BEB26D4F668325FCB5483D4AACFDE2CB7A05E26C82C93BD67F5E35898C271703CC16C         t:Vendor Specific(26) l:58, Vendor:Microsoft(311)             t:MS MPPE Send Key(16) l:52, Value:BF3FEE157C3B65F85CEA0C2489E0C68F469CAD4AD82B7994E828C8401437DB86E4B9CF5C33B2D6F843598667BC83961BCCF3         t:EAP Message(79) l:6             Extensible Authentication Protocol                 Code: Success (3)                 Id: 8                 Length: 4         t:Message Authenticator(80) l:18, Value:101102AAEA5EF1BFD69C67177ED970FF         t:User Name(1) l:5, Value:"IOT"