I did it the way you
told me..some files are created at /op/freeradius.But the other files are not
at /opt/freeradius/etc/raddb
When I issued the
command ./configure .the following doubtfull output came.
checking whether
build environment is sane... yes
I think this is the
problem.Do you have any idea on this..
-----Original
Message-----
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Tariq Rashid
Sent: Wednesday, May 04,
2005 2:58
AM
To: 'freeradius-users@lists.freeradius.org'
Subject: RE: Radius
Installation
since
you configured with --prefix=/usr/local/freeradius, everything will be under
that directory.
so
etc/raddb will be in /usr/local/freeradius/etc/raddb and so
on...
if
you're going to use --prefix - why not completely separate if from the system
/usr and do a
-----Original
Message-----
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: 04 May
2005 23:30
To:
freeradius-users@lists.freeradius.org
Subject: Radius
Installation
Hello all!!
I installed the latest radius
software that is freeradius-1.0.2.Downloaded from
www.freeradius.org
The installation step's are as
follows
1
#./configure
--prefix=/usr/local/freeradius [I tried ./configure only
also]
2
#make
3
#make install.
But after installation when I go
to /usr/local/etc/raddb. There is nothing inside raddb directory.I am
really confused.I tried the old version also freeradius-1.0.0. But
again the same problem.when I look at /usr/local/bin then there are 2 file's
over there. "radeapclient"
"smbencrypt".I was expecting the file's "/etc/raddb/users
and /etc/raddb/clients.conf This is my first
installation So I am really getting in trouble.Please kindly give me some
suggestion's.Thanking you...
__________ NOD32 1.1086
(20050502) Information __________
This message was checked by NOD32
antivirus system.
http://www.nod32.com
