I was under the assumption you were running freeradius, and didn't read into your email enough. I apologize, please disregard my post.
On Wed, 29 Jun 2005, Talwar, Puneet (NIH/NIAID) wrote: > Well I am not running radiusd on my Linux box. Do I need to run radiusd on > my Linux Box even though my radius server is running on a MS windows 2000 > server? > > I thought only thing I had to do is setup pam_radius_auth to talk to my > radius server. > > ___________________ > > > > Puneet Talwar > > -----Original Message----- > From: Dusty Doris [mailto:[EMAIL PROTECTED] > Sent: Wednesday, June 29, 2005 4:15 PM > To: FreeRadius users mailing list > Subject: RE: How can i authenticate my users against Active Directory? > > > See I am trying to authenticate against the AD, but in my case the RADIUS > > server is running on a Windows Server and my client is a Linux box. But > > the problem I am having is that when I try to authenticate against the AD > > from my Linux box I get error message in /var/log/messages > > > > login[4578]: pam_radius_auth: RADIUS server <Windows_Radius_Server > > IP_address> failed to respond > > login[4578]: pam_radius_auth: All RADIUS servers failed to respond. > > > > When I go check the log on the Radius server I can see the login attempts > > that are made from the Linux box. > > > > So I am not sure where else I can see what I am doing wrong here. > > > > What does the radius server show in debug mode? > > radiusd -X > > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
