Dear Sirs,
I'm running freeradius-1.0.4 for h323 accounting from Cisco AS5350.
I turned cisco_vsa_hack to "yes", but according to detail (and pgsql-voip
module) not all Cisco-VSA are decoded to normal AV pairs:
(I replaced several fields with XXXX in order to hide IP addresses)
Sat Jul 2 09:26:14 2005
Acct-Session-Id = "00039908"
Calling-Station-Id = "73512287317"
Called-Station-Id = "73512327225"
Cisco-AVPair = "call-id=766F6970 6D726B74 A04FC642 7C760600"
h323-setup-time = "09:26:08.476 BST Sat Jul 2 2005"
h323-gw-id = "XXXXXXXXX"
h323-conf-id = "D0236F56 EA0811D9 B31C9978 D534BC2D"
h323-call-origin = "answer"
h323-call-type = "VoIP"
Cisco-AVPair = "h323-incoming-conf-id=D0236F56 EA0811D9 B31C9978
D534BC2D"
Cisco-AVPair = "subscriber=Unknown"
Cisco-AVPair = "session-protocol=cisco"
Cisco-AVPair = "gw-rxd-cdn=ton:0,npi:1,#:73512327225"
Acct-Input-Octets = 360
Acct-Output-Octets = 5556
Acct-Input-Packets = 67
Acct-Output-Packets = 195
Acct-Session-Time = 0
h323-connect-time = "09:26:14.670 BST Sat Jul 2 2005"
h323-disconnect-time = "09:26:14.670 BST Sat Jul 2 2005"
h323-disconnect-cause = "10"
h323-remote-address = "XXXXXXXXX"
Cisco-AVPair = "release-source=2"
h323-voice-quality = "0"
Cisco-AVPair = "remote-media-address=XXXXXXXXXXX"
Cisco-AVPair = "out-trunkgroup-label=Chel"
Cisco-AVPair = "gw-rxd-cgn=ton:0,npi:1,#:73512287317"
User-Name = "mos-spa-gkp-1"
Acct-Status-Type = Stop
Service-Type = Login-User
NAS-IP-Address = XXXXXXXXXXXX
Acct-Delay-Time = 0
call-id = "766F6970 6D726B74 A04FC642 7C760600"
h323-incoming-conf-id = "D0236F56 EA0811D9 B31C9978 D534BC2D"
subscriber = "Unknown"
session-protocol = "cisco"
gw-rxd-cdn = "ton:0,npi:1,#:73512327225"
Client-IP-Address = XXXXXXXXXXX
Acct-Unique-Session-Id = "e8c1a697340192ad"
Timestamp = 1120292774
as far as I can see,
decoded fields:
Cisco-AVPair = "session-protocol=cisco"
Cisco-AVPair = "h323-incoming-conf-id=D0236F56 EA0811D9 B31C9978
Cisco-AVPair = "subscriber=Unknown"
Cisco-AVPair = "call-id=766F6970 6D726B74 A04FC642 7C760600"
not decoded fields:
Cisco-AVPair = "gw-rxd-cdn=ton:0,npi:1,#:73512327225"
Cisco-AVPair = "release-source=2"
Cisco-AVPair = "remote-media-address=XXXXXXXXXXX"
Cisco-AVPair = "out-trunkgroup-label=Chel"
Cisco-AVPair = "gw-rxd-cgn=ton:0,npi:1,#:73512287317"
why does it decode just few fields ? what did I do wrong ?
Cheers,
Ilia Chipitsine
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
