When clients vpn into my server this is what part of the access-request
comes to my radius server:
how will I be able to change that Port-Type from Async to VPN?, cause I
use a portmaster on my network as well and my Analogue dialups is also
Async , I want to be able to distinguish betweem the type of connection.
rad_recv: Accounting-Request packet from host 192.168.2.254:32955,
id=89, length=95
Acct-Session-Id = "42DE38EA0AEA"
User-Name = "blabla"
Acct-Status-Type = Start
Service-Type = Framed-User
Framed-Protocol = PPP
Acct-Authentic = RADIUS
/* NAS-Port-Type = Async*/
Framed-IP-Address = 192.168.0.244
NAS-IP-Address = 127.0.0.1
NAS-Port = 4
Acct-Delay-Time = 0
J
Dusty Doris wrote:
Hi guys,
I use freeradius with poptop, just a question that im trying to figure
out, My radius server sees the NAS-Port-Type as Async whenever a vpn
connectio is made, is there anyway to change this to let radius see for
example as a "vpn" nas-port-type .Must this port-type come from my vpn
server?
Thanks
J
Radius Attribute/Value pairs come from the NAS. Perhaps if you describe
what it is you are trying to do, we can help.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
--
Regards
Jandre
"Some people are alive only because
it is illegal to kill them."
_____________________________________________________
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
