melvin wrote:
rad_recv: Access-Request packet from host 192.168.84.11:2048, id=0,
length=125
User-Name = "melvin"
NAS-IP-Address = 192.168.84.11
Called-Station-Id = "000f66005feb"
Calling-Station-Id = "0012f075e7b3"
NAS-Identifier = "000f66005feb"
NAS-Port = 33
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x0201000b016d656c76696e
Message-Authenticator = 0x1cbf370b745f6863e6478bfed57edd74
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
modcall[authorize]: module "chap" returns noop for request 0
modcall[authorize]: module "mschap" returns noop for request 0
rlm_realm: No '@' in User-Name = "melvin", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 0
rlm_eap: EAP packet type response id 1 length 11
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 0
users: Matched entry DEFAULT at line 152
modcall[authorize]: module "files" returns ok for request 0
modcall: group authorize returns updated for request 0
rad_check_password: Found Auth-Type LDAP
auth: type "LDAP"
Processing the authenticate section of radiusd.conf
modcall: entering group Auth-Type for request 0
rlm_ldap: - authenticate
rlm_ldap: Attribute "User-Password" is required for authentication.
modcall[authenticate]: module "ldap" returns invalid for request 0
modcall: group Auth-Type returns invalid for request 0
auth: Failed to validate the user.
Any ideas where I might go wrong?
You are setting the default Auth-Type to LDAP which is screwing things
up. Try removing that entry out the users file.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html