I am not sure what I am looking for but it appears something is going wrong after the make command. I did not continue to make install.
These happen after .configure... configure: WARNING: FAILURE: rlm_eap_peap requires: OpenSSL. configure: WARNING: FAILURE: rlm_eap_tls requires: OpenSSL. configure: WARNING: FAILURE: rlm_eap_ttls requires: OpenSSL. configure: WARNING: FAILURE: rlm_krb5 requires: krb5. configure: WARNING: FAILURE: rlm_sql_postgresql requires: libpq-fe.h libpq. This is at the very end after the make command gmake[4]: *** [client.o] Error 1 gmake[4]: Leaving directory `/root/radiusd/src/main' gmake[3]: *** [common] Error 2 gmake[3]: Leaving directory `/root/radiusd/src' gmake[2]: *** [all] Error 2 gmake[2]: Leaving directory `/root/radiusd/src' gmake[1]: *** [common] Error 2 gmake[1]: Leaving directory `/root/radiusd' make: *** [all] Error 2 the full log is here: http://wcarter.webitects.com/log.txt from ./configure ... to make I very much appreciate your help! -will -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alan DeKok Sent: Friday, July 29, 2005 4:49 PM To: FreeRadius users mailing list Subject: Re: newbie questions using freeradius as wifi access point "Will Carter" <[EMAIL PROTECTED]> wrote: > doesn't start. There are no files in my /etc/raddb at this point. Then the build and/or make install failed. $ script log.txt $ configure .... $ make $ make install If you see errors at any point DO NOT go to the next step. You should be able to post a summary of the errors in a message to the list. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html