I'm having a problem with freeradius 1.0.4 configuration. I configured it to work with PAP, CHAP, MS-CHAPv1, and MS-CHAPv2. Now I would like to work with EAP-MD5 but I have always the same response:
rad_recv: Access-Request packet from host 192.168.2.63:1108, id=65, length=88
Waking up in 31 seconds...
Thread 1 got semaphore
Thread 1 handling request 5, (2 handled so far)
User-Name = "juan"
EAP-Message = 0x025700180410b8c3ecb73fe2a82ab50152301561f65f0008
State = 0x36f19352ad8e53da9ad68e321a2a1a81
Message-Authenticator = 0x676a955991b9dcdee684a339aa8420c2
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 5
modcall[authorize]: module "preprocess" returns ok for request 5
modcall[authorize]: module "chap" returns noop for request 5
modcall[authorize]: module "mschap" returns noop for request 5
rlm_realm: No '@' in User-Name = "juan", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 5
rlm_eap: EAP packet type response id 87 length 24
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 5
users: Matched entry juan at line 93
modcall[authorize]: module "files" returns ok for request 5
modcall: group authorize returns updated for request 5
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 5
rlm_eap: Request found, released from the list
rlm_eap: EAP/md5
rlm_eap: processing type md5
rlm_eap: Freeing handler
modcall[authenticate]: module "eap" returns reject for request 5
modcall: group authenticate returns reject for request 5
auth: Failed to validate the user.
Delaying request 5 for 1 seconds
Finished request 5
Going to the next request
Thread 1 waiting to be assigned a request
--- Walking the entire request list ---
Sending Access-Reject of id 65 to 192.168.2.63:1108
EAP-Message = 0x04570004
Message-Authenticator = 0x00000000000000000000000000000000
Reply-Message = "Hello, %u"
I really don't know what to do. I'm almost sure it's the radiusd.conf or eap.con files. Can anybody help me?? Thank you!!
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html