Have your radius server multiple IP addresses? In my case that was one of
my
problems. And the second was that the client and server certificate has
not
extensions part.
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
] On Behalf Of Adam Rogalski
Sent: Friday, December 30, 2005 12:10 PM
To: FreeRadius users mailing list
Subject: FreeRadius +TLS (base on openssl)
Hi
I figth with my Radius for one week and I don't have more ideas. I would
like to make my home network with WPA enterprise (WPA with TKIP + 802.1x).
I
made my own CA and generate certificates for server and client. Everything
like I red in howto from freeradius.org. My server is on fedora core 4 but
I
try on slackware too.
When I use on my AP (linksys wrt54g) WPA enterprise command radiusd -X
stops
after:
Listening on authentication *:1812
Listening on accounting *:1813
Listening on proxy *:1814
Ready to process requests.
when I change for only RADIUS and WEP I get after radiusd -X message:
[EMAIL PROTECTED] sbin]# ./radiusd -X
Starting - reading configuration files ...
reread_config: reading radiusd.conf
Config: including file: /etc/raddb/proxy.conf
Config: including file: /etc/raddb/clients.conf
Config: including file: /etc/raddb/snmp.conf
Config: including file: /etc/raddb/eap.conf
Config: including file: /etc/raddb/sql.conf
main: prefix = "/usr"
main: localstatedir = "/var"
main: logdir = "/var/log/radius"
main: libdir = "/usr/lib"
main: radacctdir = "/var/log/radius/radacct"
main: hostname_lookups = no
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 0
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_file = "/var/log/radius/radius.log"
main: log_auth = no
main: log_auth_badpass = no
main: log_auth_goodpass = no
main: pidfile = "/var/run/radiusd/radiusd.pid"
main: user = "nobody"
main: group = "nobody"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/usr/sbin/checkrad"
main: proxy_requests = yes
proxy: retry_delay = 5
proxy: retry_count = 3
proxy: synchronous = no
proxy: default_fallback = yes
proxy: dead_time = 120
proxy: post_proxy_authorize = yes
proxy: wake_all_if_all_dead = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files: reading dictionary
read_config_files: reading naslist
Using deprecated naslist file. Support for this will go away soon.
read_config_files: reading clients
read_config_files: reading realms
radiusd: entering modules setup
Module: Library search path is /usr/lib
Module: Loaded exec
exec: wait = yes
exec: program = "(null)"
exec: input_pairs = "request"
exec: output_pairs = "(null)"
exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
pap: encryption_scheme = "crypt"
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
mschap: use_mppe = yes
mschap: require_encryption = no
mschap: require_strong = no
mschap: with_ntdomain_hack = no
mschap: passwd = "(null)"
mschap: authtype = "MS-CHAP"
mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded System
unix: cache = no
unix: passwd = "(null)"
unix: shadow = "/etc/shadow"
unix: group = "(null)"
unix: radwtmp = "/var/log/radius/radwtmp"
unix: usegroup = no
unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
eap: default_eap_type = "tls"
eap: timer_expire = 60
eap: ignore_unknown_eap_types = no
eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
gtc: challenge = "Password: "
gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
tls: rsa_key_exchange = no
tls: dh_key_exchange = yes
tls: rsa_key_length = 512
tls: dh_key_length = 512
tls: verify_depth = 0
tls: CA_path = "(null)"
tls: pem_file_type = yes
tls: private_key_file = "/etc/raddb/certs/server_keycert.pem"
tls: certificate_file = "/etc/raddb/certs/server_keycert.pem"
tls: CA_file = "/etc/raddb/certs/cacert.pem"
tls: private_key_password = "adam01"
tls: dh_file = "/etc/raddb/certs/dh"
tls: random_file = "/etc/raddb/certs/random"
tls: fragment_size = 1024
tls: include_length = yes
tls: check_crl = no
tls: check_cert_cn = "(null)"
rlm_eap: Loaded and initialized type tls
mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
preprocess: huntgroups = "/etc/raddb/huntgroups"
preprocess: hints = "/etc/raddb/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
realm: format = "suffix"
realm: delimiter = "@"
realm: ignore_default = no
realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded files
files: usersfile = "/etc/raddb/users"
files: acctusersfile = "/etc/raddb/acct_users"
files: preproxy_usersfile = "/etc/raddb/preproxy_users"
files: compat = "no"
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address,
Client-IP-Addre ss, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded detail
detail: detailfile =
"/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%
d"
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
radutmp: filename = "/var/log/radius/radutmp"
radutmp: username = "%{User-Name}"
radutmp: case_sensitive = yes
radutmp: check_with_nas = yes
radutmp: perm = 384
radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Listening on authentication *:1812
Listening on accounting *:1813
Listening on proxy *:1814
Ready to process requests.
[EMAIL PROTECTED] sbin]# ./radiusd -X
Starting - reading configuration files ...
reread_config: reading radiusd.conf
Config: including file: /etc/raddb/proxy.conf
Config: including file: /etc/raddb/clients.conf
Config: including file: /etc/raddb/snmp.conf
Config: including file: /etc/raddb/eap.conf
Config: including file: /etc/raddb/sql.conf
main: prefix = "/usr"
main: localstatedir = "/var"
main: logdir = "/var/log/radius"
main: libdir = "/usr/lib"
main: radacctdir = "/var/log/radius/radacct"
main: hostname_lookups = no
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 0
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_file = "/var/log/radius/radius.log"
main: log_auth = no
main: log_auth_badpass = no
main: log_auth_goodpass = no
main: pidfile = "/var/run/radiusd/radiusd.pid"
main: user = "nobody"
main: group = "nobody"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/usr/sbin/checkrad"
main: proxy_requests = yes
proxy: retry_delay = 5
proxy: retry_count = 3
proxy: synchronous = no
proxy: default_fallback = yes
proxy: dead_time = 120
proxy: post_proxy_authorize = yes
proxy: wake_all_if_all_dead = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files: reading dictionary
read_config_files: reading naslist
Using deprecated naslist file. Support for this will go away soon.
read_config_files: reading clients
read_config_files: reading realms
radiusd: entering modules setup
Module: Library search path is /usr/lib
Module: Loaded exec
exec: wait = yes
exec: program = "(null)"
exec: input_pairs = "request"
exec: output_pairs = "(null)"
exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
pap: encryption_scheme = "crypt"
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
mschap: use_mppe = yes
mschap: require_encryption = no
mschap: require_strong = no
mschap: with_ntdomain_hack = no
mschap: passwd = "(null)"
mschap: authtype = "MS-CHAP"
mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded System
unix: cache = no
unix: passwd = "(null)"
unix: shadow = "/etc/shadow"
unix: group = "(null)"
unix: radwtmp = "/var/log/radius/radwtmp"
unix: usegroup = no
unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
eap: default_eap_type = "tls"
eap: timer_expire = 60
eap: ignore_unknown_eap_types = no
eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
gtc: challenge = "Password: "
gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
tls: rsa_key_exchange = no
tls: dh_key_exchange = yes
tls: rsa_key_length = 512
tls: dh_key_length = 512
tls: verify_depth = 0
tls: CA_path = "(null)"
tls: pem_file_type = yes
tls: private_key_file = "/etc/raddb/certs/server_keycert.pem"
tls: certificate_file = "/etc/raddb/certs/server_keycert.pem"
tls: CA_file = "/etc/raddb/certs/cacert.pem"
tls: private_key_password = "adam01"
tls: dh_file = "/etc/raddb/certs/dh"
tls: random_file = "/etc/raddb/certs/random"
tls: fragment_size = 1024
tls: include_length = yes
tls: check_crl = no
tls: check_cert_cn = "(null)"
rlm_eap: Loaded and initialized type tls
mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
preprocess: huntgroups = "/etc/raddb/huntgroups"
preprocess: hints = "/etc/raddb/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
realm: format = "suffix"
realm: delimiter = "@"
realm: ignore_default = no
realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded files
files: usersfile = "/etc/raddb/users"
files: acctusersfile = "/etc/raddb/acct_users"
files: preproxy_usersfile = "/etc/raddb/preproxy_users"
files: compat = "no"
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address,
Client-IP-Addre ss, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded detail
detail: detailfile =
"/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%
d"
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
radutmp: filename = "/var/log/radius/radutmp"
radutmp: username = "%{User-Name}"
radutmp: case_sensitive = yes
radutmp: check_with_nas = yes
radutmp: perm = 384
radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Listening on authentication *:1812
Listening on accounting *:1813
Listening on proxy *:1814
Ready to process requests.
rad_recv: Access-Request packet from host 192.168.1.1:2054, id=0,
length=121
User-Name = "Adam"
NAS-IP-Address = 192.168.1.1
Called-Station-Id = "0014bf2f16c2"
Calling-Station-Id = "000e3573296d"
NAS-Identifier = "0014bf2f16c2"
NAS-Port = 55
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x02000009014164616d
Message-Authenticator = 0x88f32269e104d036be28f8411cd133b6
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
modcall[authorize]: module "chap" returns noop for request 0
modcall[authorize]: module "mschap" returns noop for request 0
rlm_realm: No '@' in User-Name = "Adam", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 0
rlm_eap: EAP packet type response id 0 length 9
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 0
users: Matched entry DEFAULT at line 152
modcall[authorize]: module "files" returns ok for request 0
modcall: group authorize returns updated for request 0
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
rlm_eap: EAP Identity
rlm_eap: processing type tls
rlm_eap_tls: Requiring client certificate
rlm_eap_tls: Initiate
rlm_eap_tls: Start returned 1
modcall[authenticate]: module "eap" returns handled for request 0
modcall: group authenticate returns handled for request 0 Sending
Access-Challenge of id 0 to 192.168.1.1:2054
EAP-Message = 0x010100060d20
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x44e256d6f94136dbb146b56055f69cf3
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.1.1:2054, id=0,
length=236
User-Name = "Adam"
NAS-IP-Address = 192.168.1.1
Called-Station-Id = "0014bf2f16c2"
Calling-Station-Id = "000e3573296d"
NAS-Identifier = "0014bf2f16c2"
NAS-Port = 55
Framed-MTU = 1400
State = 0x44e256d6f94136dbb146b56055f69cf3
NAS-Port-Type = Wireless-802.11
EAP-Message =
0x0201006a0d8000000060160301005b01000057030143b50d1a0e6730
f71ec0114327ca53bc3eade6ecabd6c027a46f2642fb6e39d000003000390038003500160013
000a
00330032002f0066000500040065006400630062006000150012000900140011000800030100
Message-Authenticator = 0xe801c7aec46700968dfa44913e23d516
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 1
modcall[authorize]: module "preprocess" returns ok for request 1
modcall[authorize]: module "chap" returns noop for request 1
modcall[authorize]: module "mschap" returns noop for request 1
rlm_realm: No '@' in User-Name = "Adam", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 1
rlm_eap: EAP packet type response id 1 length 106
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 1
users: Matched entry DEFAULT at line 152
modcall[authorize]: module "files" returns ok for request 1
modcall: group authorize returns updated for request 1
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 1
rlm_eap: Request found, released from the list
rlm_eap: EAP/tls
rlm_eap: processing type tls
rlm_eap_tls: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Length Included
eaptls_verify returned 11
(other): before/accept initialization
TLS_accept: before/accept initialization
rlm_eap_tls: <<< TLS 1.0 Handshake [length 005b], ClientHello
TLS_accept: SSLv3 read client hello A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello
TLS_accept: SSLv3 write server hello A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 02a7], Certificate
TLS_accept: SSLv3 write certificate A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 010d], ServerKeyExchange
TLS_accept: SSLv3 write key exchange A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 0099], CertificateRequest
TLS_accept: SSLv3 write certificate request A
TLS_accept: SSLv3 flush data
TLS_accept:error in SSLv3 read client certificate A In SSL Handshake
Phase In SSL Accept mode
eaptls_process returned 13
modcall[authenticate]: module "eap" returns handled for request 1
modcall: group authenticate returns handled for request 1 Sending
Access-Challenge of id 0 to 192.168.1.1:2054
EAP-Message =
0x0102040a0dc0000004ab160301004a02000046030143b50c5e53e9e8
a74a80938207f2b0b3bb015986bef383fbada6998b571453ee2050a14d2d1936b94767dc8e38
5486
0e4a418ee7d1541dc3c54807f12c5996889200390016030102a70b0002a30002a000029d3082
0299
30820202a003020102020101300d06092a864886f70d0101040500308185310b300906035504
0613
02504c311330110603550408130a446f6c6e79536c61736b3110300e0603550407130757726f
636c
6177310e300c060355040a1305446f6d656b3122302006035504031319736572776572656b2e
6164
616d656b2e686f70746f2e6f7267311b301906092a864886f7
EAP-Message =
0x0d010901160c61726f67616c4077702e706c301e170d303531323330
3038333635345a170d3036313233303038333635345a308185310b300906035504061302504c
3113
30110603550408130a446f6c6e79536c61736b3110300e0603550407130757726f636c617731
0e30
0c060355040a1305446f6d656b3122302006035504031319736572776572656b2e6164616d65
6b2e
686f70746f2e6f7267311b301906092a864886f70d010901160c61726f67616c4077702e706c
3081
9f300d06092a864886f70d010101050003818d0030818902818100e446b6595abca00c76e48b
21d6
95f43d9a2770dd067bfcaef859ec5bcedb74a14600a9dd179e
EAP-Message =
0x23d8f7809495f018a50d359f78915fb18b41a74e7441f6716823e415
0febd758698291dd48150bc697d56be21a536b089b17f9e3fa049db4e52402fac8f72e493cbf
cbda
0e217cdd2a93598632c1c64cc7d70840ec0fbce918e30203010001a317301530130603551d25
040c
300a06082b06010505070301300d06092a864886f70d0101040500038181000662e9a572dec1
51d2
6adb88c7cee3cc7bf0f7f41e8c03d8b85b2b7db7ab2b35fb21ecabb9f15f395e6482b762c04a
ec81
0c4a9883986037d5c17eaf0539e64aae928e7da2394d5b5b3c7d61791d3ae373cf15a1592502
1f00
51f518de9c12f6e04fe46f39a2b53f6b2345b0b94fc9da2499
EAP-Message =
0x110108df4251a2d2f21ca4ebaf2c160301010d0c0001090040ca7f38
db174492ff0737acbd4117d15bb7b41b837016a8422f3a34f9af06244de89a01df120f154711
7480
2929bc655907ca6ff7b441f03ea72c1ad2c3caae8b00010500407f8f356cf73802cb22f17e4d
3a2c
ea90839f15a1b1c4d7d15014724bd5ef9aba1e17dd262df70a5c8784c64dbd5dcb6a0ae0bdfa
390b
337d50ed9e97d97324b60080c10536878e2d1ec56f2ad550b03e61c35ae1920f1d5ab39c5ed5
bfe2
f8cd2b804799634038088cd836ab6229e86a39589c5a3f9cf93c700c2dfd6bf684ea2e5efc90
12db
f4a6704e75cdd233d632c43e0f0a762ad8df90da110e39dd2f
EAP-Message = 0x0aab1b9e0bc4fe20ea2b877b8ccb0c2e7b89e1e6952f
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x767b202144333f7b0182c93a33070eb4
Finished request 1
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.1.1:2054, id=0,
length=136
User-Name = "Adam"
NAS-IP-Address = 192.168.1.1
Called-Station-Id = "0014bf2f16c2"
Calling-Station-Id = "000e3573296d"
NAS-Identifier = "0014bf2f16c2"
NAS-Port = 55
Framed-MTU = 1400
State = 0x767b202144333f7b0182c93a33070eb4
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x020200060d00
Message-Authenticator = 0x2e5131827a4a1a6955a9eada5a37ad5d
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 2
modcall[authorize]: module "preprocess" returns ok for request 2
modcall[authorize]: module "chap" returns noop for request 2
modcall[authorize]: module "mschap" returns noop for request 2
rlm_realm: No '@' in User-Name = "Adam", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 2
rlm_eap: EAP packet type response id 2 length 6
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 2
users: Matched entry DEFAULT at line 152
modcall[authorize]: module "files" returns ok for request 2
modcall: group authorize returns updated for request 2
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 2
rlm_eap: Request found, released from the list
rlm_eap: EAP/tls
rlm_eap: processing type tls
rlm_eap_tls: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
rlm_eap_tls: ack handshake fragment handler
eaptls_verify returned 1
eaptls_process returned 13
modcall[authenticate]: module "eap" returns handled for request 2
modcall: group authenticate returns handled for request 2 Sending
Access-Challenge of id 0 to 192.168.1.1:2054
EAP-Message =
0x010300b50d80000004abea37366e949b739e4e8ce5d1051603010099
0d0000910403040102008a0088308185310b300906035504061302504c311330110603550408
130a
446f6c6e79536c61736b3110300e0603550407130757726f636c6177310e300c060355040a13
0544
6f6d656b3122302006035504031319736572776572656b2e6164616d656b2e686f70746f2e6f
7267
311b301906092a864886f70d010901160c61726f67616c4077702e706c0e000000
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xe15d58f49422b6ce53338dbcb286d67d
Finished request 2
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.1.1:2054, id=0,
length=147
User-Name = "Adam"
NAS-IP-Address = 192.168.1.1
Called-Station-Id = "0014bf2f16c2"
Calling-Station-Id = "000e3573296d"
NAS-Identifier = "0014bf2f16c2"
NAS-Port = 55
Framed-MTU = 1400
State = 0xe15d58f49422b6ce53338dbcb286d67d
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x020300110d800000000715030100020230
Message-Authenticator = 0x9ccbb7428e7fb4c0adce582d01b259c6
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 3
modcall[authorize]: module "preprocess" returns ok for request 3
modcall[authorize]: module "chap" returns noop for request 3
modcall[authorize]: module "mschap" returns noop for request 3
rlm_realm: No '@' in User-Name = "Adam", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 3
rlm_eap: EAP packet type response id 3 length 17
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 3
users: Matched entry DEFAULT at line 152
modcall[authorize]: module "files" returns ok for request 3
modcall: group authorize returns updated for request 3
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 3
rlm_eap: Request found, released from the list
rlm_eap: EAP/tls
rlm_eap: processing type tls
rlm_eap_tls: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Length Included
eaptls_verify returned 11
rlm_eap_tls: <<< TLS 1.0 Alert [length 0002], fatal unknown_ca TLS Alert
read:fatal:unknown CA
TLS_accept:failed in SSLv3 read client certificate A
2426:error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown
ca:s3_pkt.c :1052:SSL alert number 48
2426:error:140940E5:SSL routines:SSL3_READ_BYTES:ssl handshake
failure:s3_pkt.c: 837:
rlm_eap_tls: SSL_read failed in a system call (-1), TLS session fails.
In SSL Handshake Phase
In SSL Accept mode
rlm_eap_tls: BIO_read failed in a system call (-1), TLS session fails.
eaptls_process returned 13
rlm_eap: Freeing handler
modcall[authenticate]: module "eap" returns reject for request 3
modcall: group authenticate returns reject for request 3
auth: Failed to validate the user.
Delaying request 3 for 1 seconds
Finished request 3
Going to the next request
Waking up in 6 seconds...
--- Walking the entire request list ---
Sending Access-Reject of id 0 to 192.168.1.1:2054
EAP-Message = 0x04030004
Message-Authenticator = 0x00000000000000000000000000000000
Cleaning up request 3 ID 0 with timestamp 43b50c5e Nothing to do.
Sleeping
until we see a request.
As a client I use my buildin centrino card intel2200 and windows xp with
sp2
So if enybody can help I will be very gratefull
Best regards
Adam
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
