Alan, I tryed it in full debug mode, returns this:
rad_recv: Access-Request packet from host 127.0.0.1:32773, id=46, length=62 Service-Type = Login-User User-Name = "nata" User-Password = "nata0405" NAS-IP-Address = 200.163.208.4 NAS-Port = 0 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "mschap" returns noop for request 1 rlm_realm: No '@' in User-Name = "nata", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 1 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 1 users: Matched DEFAULT at 152 users: Matched DEFAULT at 216 modcall[authorize]: module "files" returns ok for request 1 modcall: group authorize returns ok for request 1 rad_check_password: Found Auth-Type System auth: type "System" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 1 rlm_unix: [nata]: invalid password modcall[authenticate]: module "unix" returns reject for request 1 modcall: group authenticate returns reject for request 1 auth: Failed to validate the user. Login incorrect: [nata/nata0405] (from client localhost port 0) Sending Access-Reject of id 46 to 127.0.0.1:32773 Finished request 1 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 1 ID 46 with timestamp 43d7232a Nothing to do. Sleeping until we see a request. I could not understand what is going on. The password is correct for this user. Att, Nataniel Klug ----- Original Message ----- From: "Alan DeKok" <[EMAIL PROTECTED]> To: "FreeRadius users mailing list" <freeradius-users@lists.freeradius.org> Sent: Tuesday, January 24, 2006 3:21 PM Subject: Re: Problems System Auth with FreeRadius (/etc/shadow) > "Nataniel Klug" <[EMAIL PROTECTED]> wrote: > > [EMAIL PROTECTED] radius]# tail radius.log -n 2 > > Tue Jan 24 01:24:02 2006 : Auth: rlm_unix: [nata]: invalid password > > Nice. Is there any particular reason you're refusing to run the > server in debugging mode, as suggested in the README, FAQ, and > INSTALL? > > Alan DeKok. > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html