Hi I think you have to try in this way (for example): TEST4 Cisco-AVPair == "ssid=SSID1" , Auth-Type := EAP Tunnel-Medium-Type = IEEE-802, Tunnel-Private-Group-Id = 2, Tunnel-Type = VLAN DEFAULT Auth-Type := Reject
if uou want a password: TEST4 Cisco-AVPair == "ssid=SSID1" ,User-Password="XXXX", Auth-Type := EAP Tunnel-Medium-Type = IEEE-802, Tunnel-Private-Group-Id = 2, Tunnel-Type = VLAN DEFAULT Auth-Type := Reject Regards sergio Antonio Matera wrote: > My goal is to have authenticate user only if the SSID is right! > You know how can I do it? > > Thanks > Antonio > > on 05/04/2006 17.33 Sergio Sagliocco said the following: >> Hello >> your goal is authenticate users only if the SSID is rght or to have >> different EAP Authentication method based on SSID? >> >> regards >> sergio >> >> >> Antonio Matera wrote: >> >>> Hallo, >>> thanks for the answer. >>> >>> With your solution my radius don't authenticate my users.... >>> Is my configuration correct or I need other change in my radius files? >>> >>> Thanks bye >>> >>> on 05/04/2006 15.27 Sergio Sagliocco said the following: >>> >>>> Hi >>>> I think you have to use == instead of := >>>> For example: >>>> >>>> DEFAULT Cisco-AVPair == "ssid=testLEAP" , EAP-Type := Cisco-LEAP >>>> >>>> Regards >>>> >>>> >>>> >>> - List info/subscribe/unsubscribe? See >>> http://www.freeradius.org/list/users.html >>> >>> >>> >> >> > ------------------------------------------------------------------------ > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html -- Sergio SAGLIOCCO SecureLAB - http://www.securelab.it CSP s.c. a r.l. - http://www.csp.it ______________________________________________ Villa Gualino Viale Settimo Severo, 63 - 10133 Torino [IT] tel. +39 011 481 5140 - Mobile +39 348 6024078 fax +39 011 481 5001 ______________________________________________ - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html