Hello,
What kind of magic tricks are needed to get Auth-Type = System to work?
Running FreeRADIUS Version 1.0.4 on SuSE 10 with MD5 and shadow
passwords, using the following 'users' file:
DEFAULT Auth-Type = System
Service-Type = Framed-User,
Framed-Protocol = PPP,
Port-Limit = 2,
Framed-IP-Address = 255.255.255.254,
Framed-MTU = 1500
Now, I restart radiusd and test it:
# echo "User-Name = ###, User-Password = ###" | radclient -x localhost
auth ###
Sending Access-Request of id 151 to 127.0.0.1:1645
User-Name = "###"
User-Password = "###"
rad_recv: Access-Reject packet from host 127.0.0.1:1645, id=151, length=20
I get this in my radius log:
Fri Apr 7 14:39:01 2006 : Auth: rlm_unix: [###]: invalid password
Running radiusd in -X mode, I get this:
rad_recv: Access-Request packet from host 127.0.0.1:32926, id=131,
length=46
User-Name = "###"
User-Password = "###"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
modcall[authorize]: module "chap" returns noop for request 0
modcall[authorize]: module "mschap" returns noop for request 0
rlm_realm: No '@' in User-Name = "###", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 0
rlm_eap: No EAP-Message, not doing EAP
modcall[authorize]: module "eap" returns noop for request 0
users: Matched entry DEFAULT at line 5
modcall[authorize]: module "files" returns ok for request 0
modcall: group authorize returns ok for request 0
rad_check_password: Found Auth-Type System
auth: type "System"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
rlm_unix: [###]: invalid password
modcall[authenticate]: module "unix" returns reject for request 0
modcall: group authenticate returns reject for request 0
auth: Failed to validate the user.
Been banging my head against the wall over this problem for almost two
weeks now, and getting a bit desperate for a solution....
-Andreas.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
