Hi Gef
I solved the problem through C and rlm_modules.
Anyway, Thanks a lot.
Regards
On 9/21/06, Geoffrey Cauchi <[EMAIL PROTECTED]> wrote:
Hello Ali
I do not know whether you managed to solve your issue, however using a perl
script, the format to send these AV Pairs is:
#!/usr/bin/perl
print "Cisco-AVPair += \"h323-return-code=0\"\,\n";
print "Cisco-AVPair += \"h323-credit-amount=30\"\,\n";
print "Cisco-AVPair += \"h323-credit-time=200\"\n";
exit(0);
And now the script works.
Obviously the h323-credit-time and h323-credit-amount need to be calculated
in real time, but the above can be used as a test to allow you to utilise
the cisco TCL script with freeradius
Hope this helps
Gef
________________________________________
From: freeradius-users-bounces+agcauchi=[EMAIL PROTECTED]
[mailto: [EMAIL PROTECTED]
rg] On Behalf Of Ali Majdzadeh
Sent: 07 September 2006 10:06
To: FreeRadius users mailing list; [EMAIL PROTECTED]
Subject: Re: Freeradius + Cisco VoIP
Hi Alan
I replied Geoffrey with all I knew about AV pairs expected by a Cisco VoIP
gateway. But I have another problem.
I am using rlm_example to develop a module to handle VoIP stuff.
My question is, how should I pack and send those AV piars expected by the
gateway?
For example, in example_authenticate function, I should return a number of
AV pairs to the gateway in order to authenticate the user. How should I do
that?
Best Regards
Ali
On 9/6/06, Alan DeKok <[EMAIL PROTECTED]> wrote:
"Geoffrey Cauchi" <[EMAIL PROTECTED]> wrote:
> Can anyone provide a sample config of the AV Pairs required by a cisco
VoIP
> gateway to accept a user?
See the NAS documentation.
Alan DeKok.
--
http://deployingradius.com - The web site of the book
http://deployingradius.com/blog/ - The blog
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
