Hi, with which AP has you this values. Because with my dlink DWL-2000+, EAP work but i'm not all this infos :(
Franck > Hello, > > I am developing my freeradius server (version 1.1.2) to use it in a WPA > wireless environment with EAP authentication. > > Until this moment (without EAP) the accounting information collected by > freeradius is in the form: > > - detail-YYYYMMDD: > > Fri Oct 20 11:07:59 2006 > User-Name = "<username>@<realm>" > NAS-Port = 2161 > Service-Type = Framed-User > Framed-Protocol = PPP > Framed-IP-Address = X.X.X.X > Class = 0x69636172756d > Calling-Station-Id = "172.18.201.166" > Acct-Status-Type = Start > Acct-Session-Id = "15D003FA" > Tunnel-Client-Endpoint:0 = "172.18.201.166" > Acct-Authentic = RADIUS > Acct-Delay-Time = 0 > NAS-IP-Address = <nas IP address> > NAS-Port-Type = Virtual > Proxy-State = 0x323034 > Client-IP-Address = <client ip address> > Acct-Unique-Session-Id = "e43a1da655ba3ef3" > Stripped-User-Name = "<username>" > Realm = "<realm>" > Timestamp = 1161335279 > > - auth-detail-YYYYMMDD: > > Packet-Type = Access-Request > Fri Oct 20 11:10:14 2006 > User-Name = "<username>@<realm>" > User-Password = "190482" > NAS-Identifier = "<nas id>" > NAS-IP-Address = <nas ip> > Proxy-State = 0x323433 > Client-IP-Address = <client ip> > > But with EAP the files has the same form, but username is always > "anonymous", because the real authentication is made through the tunnel > connection. > > I want to know if there is any way to configure radius to log the real > username instead of anonymous in the log files. > > Thanks. > > > -- > Angel L. Mateo Martínez > Sección de Telemática > Área de Tecnologías de la Información _o) > y las Comunicaciones Aplicadas (ATICA) / \\ > http://www.um.es/atica _(___V > Tfo: 968367590 > Fax: 968398337 > > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > -- http://www.linuxpourtous.com - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html