> Hello Ernie, > > Just wondering if you are using clients.conf at all?
Yup. The way you can tell is by running `freeradius -X`, like I did. You'll see a line like this: Config: including file: /etc/freeradius/clients.conf > I need to migrate > an older freeradius 0.9x to 1.2 and notice that the newer sql setup > uses an "nas" table that was not in the older setup. We used > clients.conf for the nas's and I'm trying to figure out how/if > clients.conf gets migrated to the nas table. Did you find any > pertinent docs? Nope. The best documentation I can find is the FreeRADIUS faq on the FreeRADIUS home page. And it's out of date in this matter. > > Friday, December 1, 2006, 2:46:04 PM, you wrote: > >> I'm using FreeRADIUS 1.0.2 and its associated mysql plugin on a Debian >> 3.1 >> system. I've managed to get the server working to where our customers >> are >> authenticating out of the mysql database just fine and the accounting >> records are being stored in mysql properly too. > >> But the Simultaneous-Use configuration directive doesn't do a thing. It >> doesn't even check against radwtmp (even though the radwho command works >> fine) when someone logs on. The FAQ at >> http://www.freeradius.org/faq/#4.7.2 doesn't help any either, in no >> small >> part because it's outdated and neither raddb/naslist nor radcheck.pl >> exist >> in the new version. I don't see anything about Simultaneous-Use being >> parsed when I run 'freeradius -X' however, so that might be a clue. > >> Here's the appropriate configuration on our server: > >> clients.conf: > >> client XXX.XXX.XXX.XXX { >> secret = XXXXXX >> nastype = cisco >> login = XXXXXX >> password = XXXXXX >> shortname = dialup >> } > >> users: > >> DEFAULT Framed-Protocol == PPP, Simultaneous-Use := 1 >> Framed-Protocol = PPP, >> Service-Type = Framed-User, >> Framed-Compression = Van-Jacobson-TCP-IP > >> And finally, the output of freeradius -X: > >> ns2:/etc/freeradius# /usr/sbin/freeradius -X >> Starting - reading configuration files ... >> reread_config: reading radiusd.conf >> Config: including file: /etc/freeradius/proxy.conf >> Config: including file: /etc/freeradius/clients.conf >> Config: including file: /etc/freeradius/snmp.conf >> Config: including file: /etc/freeradius/eap.conf >> Config: including file: /etc/freeradius/sql.conf >> main: prefix = "/usr" >> main: localstatedir = "/var" >> main: logdir = "/var/log/freeradius" >> main: libdir = "/usr/lib/freeradius" >> main: radacctdir = "/var/log/freeradius/radacct" >> main: hostname_lookups = no >> main: max_request_time = 30 >> main: cleanup_delay = 5 >> main: max_requests = 256 >> main: delete_blocked_requests = 0 >> main: port = 1812 >> main: allow_core_dumps = no >> main: log_stripped_names = yes >> main: log_file = "/var/log/freeradius/radius.log" >> main: log_auth = yes >> main: log_auth_badpass = yes >> main: log_auth_goodpass = yes >> main: pidfile = "/var/run/freeradius/freeradius.pid" >> main: user = "freerad" >> main: group = "freerad" >> main: usercollide = no >> main: lower_user = "no" >> main: lower_pass = "no" >> main: nospace_user = "after" >> main: nospace_pass = "after" >> main: checkrad = "/usr/sbin/checkrad" >> main: proxy_requests = off >> security: max_attributes = 200 >> security: reject_delay = 1 >> security: status_server = no >> main: debug_level = 0 >> read_config_files: reading dictionary >> read_config_files: reading naslist >> read_config_files: reading clients >> read_config_files: reading realms >> radiusd: entering modules setup >> Module: Library search path is /usr/lib/freeradius >> Module: Loaded exec >> exec: wait = yes >> exec: program = "(null)" >> exec: input_pairs = "request" >> exec: output_pairs = "(null)" >> exec: packet_type = "(null)" >> rlm_exec: Wait=yes but no output defined. Did you mean output=none? >> Module: Instantiated exec (exec) >> Module: Loaded expr >> Module: Instantiated expr (expr) >> Module: Loaded PAP >> pap: encryption_scheme = "crypt" >> Module: Instantiated pap (pap) >> Module: Loaded MS-CHAP >> mschap: use_mppe = yes >> mschap: require_encryption = no >> mschap: require_strong = no >> mschap: with_ntdomain_hack = no >> mschap: passwd = "(null)" >> mschap: authtype = "MS-CHAP" >> mschap: ntlm_auth = "(null)" >> Module: Instantiated mschap (mschap) >> Module: Loaded System >> unix: cache = no >> unix: passwd = "(null)" >> unix: shadow = "/etc/shadow" >> unix: group = "(null)" >> unix: radwtmp = "/var/log/freeradius/radwtmp" >> unix: usegroup = no >> unix: cache_reload = 600 >> Module: Instantiated unix (unix) >> Module: Loaded preprocess >> preprocess: huntgroups = "/etc/freeradius/huntgroups" >> preprocess: hints = "/etc/freeradius/hints" >> preprocess: with_ascend_hack = no >> preprocess: ascend_channels_per_line = 23 >> preprocess: with_ntdomain_hack = no >> preprocess: with_specialix_jetstream_hack = no >> preprocess: with_cisco_vsa_hack = no >> Module: Instantiated preprocess (preprocess) >> Module: Loaded files >> files: usersfile = "/etc/freeradius/users" >> files: acctusersfile = "/etc/freeradius/acct_users" >> files: preproxy_usersfile = "/etc/freeradius/preproxy_users" >> files: compat = "no" >> Module: Instantiated files (files) >> Module: Loaded SQL >> sql: driver = "rlm_sql_mysql" >> sql: server = "localhost" >> sql: port = "" >> sql: login = "dialupacct" >> sql: password = "[EMAIL PROTECTED]" >> sql: radius_db = "dialupacct" >> sql: acct_table = "radacct" >> sql: acct_table2 = "radacct" >> sql: authcheck_table = "radcheck" >> sql: authreply_table = "radreply" >> sql: groupcheck_table = "radgroupcheck" >> sql: groupreply_table = "radgroupreply" >> sql: usergroup_table = "usergroup" >> sql: nas_table = "nas" >> sql: dict_table = "dictionary" >> sql: sqltrace = yes >> sql: sqltracefile = "/var/log/freeradius/sqltrace.sql" >> sql: readclients = no >> sql: deletestalesessions = yes >> sql: num_sql_socks = 5 >> sql: sql_user_name = "%{User-Name}" >> sql: default_user_profile = "" >> sql: query_on_not_found = no >> sql: authorize_check_query = "SELECT >> id,UserName,Attribute,Value,op FROM >> radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id" >> sql: authorize_reply_query = "SELECT >> id,UserName,Attribute,Value,op FROM >> radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id" >> sql: authorize_group_check_query = "SELECT >> radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op >> FROM radgroupcheck,usergroup WHERE usergroup.Username = >> '%{SQL-User-Name}' AND usergroup.GroupName = radgroupcheck.GroupName >> ORDER BY radgroupcheck.id" >> sql: authorize_group_reply_query = "SELECT >> radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op >> FROM radgroupreply,usergroup WHERE usergroup.Username = >> '%{SQL-User-Name}' AND usergroup.GroupName = radgroupreply.GroupName >> ORDER BY radgroupreply.id" >> sql: accounting_onoff_query = "UPDATE radacct SET AcctStopTime='%S', >> AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime), >> AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay = >> '%{Acct-Delay-Time}' WHERE AcctSessionTime=0 AND AcctStopTime=0 AND >> NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'" >> sql: accounting_update_query = "UPDATE radacct ? SET FramedIPAddress = >> '%{Framed-IP-Address}', ? AcctSessionTime = '%{Acct-Session-Time}', ? >> AcctInputOctets = '%{Acct-Input-Octets}', ? AcctOutputOctets = >> '%{Acct-Output-Octets}' ? WHERE AcctSessionId = '%{Acct-Session-Id}' ? >> AND UserName = '%{SQL-User-Name}' ? AND NASIPAddress= >> '%{NAS-IP-Address}'" >> sql: accounting_update_query_alt = "INSERT into radacct (AcctSessionId, >> AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, >> AcctStartTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, >> AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, >> ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay) >> values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', >> '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', >> '%{NAS-Port-Type}', DATE_SUB('%S',INTERVAL (%{Acct-Session-Time:-0} + >> %{Acct-Delay-Time:-0}) SECOND), '%{Acct-Session-Time}', >> '%{Acct-Authentic}', '', '%{Acct-Input-Octets}', >> '%{Acct-Output-Octets}', >> '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', >> '%{Framed-Protocol}', '%{Framed-IP-Address}', '0')" >> sql: accounting_start_query = "INSERT into radacct (AcctSessionId, >> AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, >> AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, >> ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, >> CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, >> FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) >> values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', >> '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', >> '%{NAS-Port-Type}', '%S', '0', '0', '%{Acct-Authentic}', >> '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', >> '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', >> '%{Framed-IP-Address}', '%{Acct-Delay-Time}', '0')" >> sql: accounting_start_query_alt = "UPDATE radacct SET AcctStartTime = >> '%S', AcctStartDelay = '%{Acct-Delay-Time}', ConnectInfo_start = >> '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND >> UserName >> = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'" >> sql: accounting_stop_query = "UPDATE radacct SET AcctStopTime = '%S', >> AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets = >> '%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}', >> AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = >> '%{Acct-Delay-Time}', ConnectInfo_stop = '%{Connect-Info}' WHERE >> AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' >> AND NASIPAddress = '%{NAS-IP-Address}'" >> sql: accounting_stop_query_alt = "INSERT into radacct (AcctSessionId, >> AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, >> AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, >> ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, >> CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, >> FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) >> values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', >> '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', >> '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{Acct-Session-Time:-0} + >> %{Acct-Delay-Time:-0}) SECOND), '%S', '%{Acct-Session-Time}', >> '%{Acct-Authentic}', '', '%{Connect-Info}', '%{Acct-Input-Octets}', >> '%{Acct-Output-Octets}', '%{Called-Station-Id}', >> '%{Calling-Station-Id}', >> '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', >> '%{Framed-IP-Address}', '0', '%{Acct-Delay-Time}')" >> sql: group_membership_query = "SELECT GroupName FROM usergroup WHERE >> UserName='%{SQL-User-Name}'" >> sql: connect_failure_retry_delay = 60 >> sql: simul_count_query = "SELECT COUNT(*) FROM radacct WHERE >> UserName='%{SQL-User-Name}' AND AcctStopTime = 0" >> sql: simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName, >> NASIPAddress, NASPortId, FramedIPAddress, CallingStationId, >> FramedProtocol FROM radacct WHERE UserName='%{SQL-User-Name}' AND >> AcctStopTime = 0" >> sql: postauth_table = "radpostauth" >> sql: postauth_query = "INSERT into radpostauth (id, user, pass, reply, >> date) values ('', '%{User-Name}', '%{User-Password:-Chap-Password}', >> '%{reply:Packet-Type}', NOW())" >> sql: safe-characters = >> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" >> rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and >> linked >> rlm_sql (sql): Attempting to connect to [EMAIL PROTECTED]:/dialupacct >> rlm_sql (sql): starting 0 >> rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 >> rlm_sql_mysql: Starting connect to MySQL server for #0 >> rlm_sql (sql): Connected new DB handle, #0 >> rlm_sql (sql): starting 1 >> rlm_sql (sql): Attempting to connect rlm_sql_mysql #1 >> rlm_sql_mysql: Starting connect to MySQL server for #1 >> rlm_sql (sql): Connected new DB handle, #1 >> rlm_sql (sql): starting 2 >> rlm_sql (sql): Attempting to connect rlm_sql_mysql #2 >> rlm_sql_mysql: Starting connect to MySQL server for #2 >> rlm_sql (sql): Connected new DB handle, #2 >> rlm_sql (sql): starting 3 >> rlm_sql (sql): Attempting to connect rlm_sql_mysql #3 >> rlm_sql_mysql: Starting connect to MySQL server for #3 >> rlm_sql (sql): Connected new DB handle, #3 >> rlm_sql (sql): starting 4 >> rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 >> rlm_sql_mysql: Starting connect to MySQL server for #4 >> rlm_sql (sql): Connected new DB handle, #4 >> Module: Instantiated sql (sql) >> Module: Loaded realm >> realm: format = "suffix" >> realm: delimiter = "@" >> realm: ignore_default = no >> realm: ignore_null = no >> Module: Instantiated realm (suffix) >> Module: Loaded detail >> detail: detailfile = >> "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d" >> detail: detailperm = 384 >> detail: dirperm = 493 >> detail: locking = no >> Module: Instantiated detail (detail) >> Module: Loaded radutmp >> radutmp: filename = "/var/log/freeradius/radutmp" >> radutmp: username = "%{User-Name}" >> radutmp: case_sensitive = yes >> radutmp: check_with_nas = yes >> radutmp: perm = 384 >> radutmp: callerid = yes >> Module: Instantiated radutmp (radutmp) >> Module: Loaded eap >> eap: default_eap_type = "md5" >> eap: timer_expire = 60 >> eap: ignore_unknown_eap_types = no >> eap: cisco_accounting_username_bug = no >> rlm_eap: Loaded and initialized type md5 >> rlm_eap: Loaded and initialized type leap >> gtc: challenge = "Password: " >> gtc: auth_type = "PAP" >> rlm_eap: Loaded and initialized type gtc >> mschapv2: with_ntdomain_hack = no >> rlm_eap: Loaded and initialized type mschapv2 >> Module: Instantiated eap (eap) >> Listening on authentication *:1812 >> Listening on accounting *:1813 >> Ready to process requests. > >> - >> List info/subscribe/unsubscribe? See >> http://www.freeradius.org/list/users.html > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html