Can you clarify: In 0.9.3 (/usr/local/raddb/dictionary): VALUE Service-Type Administrative-User 6
In 1.1.0 (usr/local/share/freeradius/dictionary.rfc2865): VALUE Service-Type Administrative-User 6 And this represents data from tables on BOTH servers: mysql> SELECT * from radgroupcheck where value like '%Administ%'; +----+-----------+--------------+----+----------------+ | id | GroupName | Attribute | op | Value | +----+-----------+--------------+----+----------------+ | 1 | colubris | Service-Type | == | Administrative | | 6 | nomadix | Service-Type | == | Administrative | +----+-----------+--------------+----+----------------+ 2 rows in set (0.00 sec) Now, 0.9.3 runs smoothly and returns no error... While 1.1.0 returns: rad_recv: Access-Request packet from host 204.95.127.xxx:2048, id=187, length=192 Acct-Session-Id = "538beb43" NAS-Port = 0 NAS-Port-Type = Wireless-802.11 User-Name = "hawth_cn3000" Calling-Station-Id = "00-02-2D-A7-90-E3" Called-Station-Id = "00-03-52-00-2A-70" Framed-IP-Address = 10.1.64.1 CHAP-Password = 0xbbcfb2ff55c0f0631707a373efafcc4d80 CHAP-Challenge = 0xb3b35eed6c545478a382df419e830423 NAS-Identifier = "M003-00235" NAS-IP-Address = 204.95.127.xxx Framed-MTU = 1496 Connect-Info = "HTTPS" Service-Type = Administrative-User Message-Authenticator = 0x56f3a49ec1ef7b05bbe9f308140c404c Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 Invalid operator for item Suffix: reverting to '==' Invalid operator for item Suffix: reverting to '==' Invalid operator for item Suffix: reverting to '==' modcall[authorize]: module "preprocess" returns ok for request 0 rlm_chap: Setting 'Auth-Type := CHAP' modcall[authorize]: module "chap" returns ok for request 0 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 0 rlm_realm: No '@' in User-Name = "hawth_cn3000", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 modcall[authorize]: module "files" returns notfound for request 0 modcall[authorize]: module "mschap" returns noop for request 0 radius_xlat: 'hawth_cn3000' rlm_sql (sql): sql_set_user escaped user --> 'hawth_cn3000' radius_xlat: 'SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'hawth_cn3000' ORDER BY id' rlm_sql (sql): Reserving sql socket id: 4 radius_xlat: 'SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = 'hawth_cn3000' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id' ! ERROR rlm_sql: Failed to create the pair: Unknown value Administrative for attribute Service-Type rlm_sql (sql): Error getting data from database (It authenticates, but only sends the first of several A-V pairs needed by the CN3200: "At least one required internal page was not retrieved - Keeping previous set of internal pages." ) I apologize if this is getting unclear, please bear with me, I need to get this going. MUCH thanks. Andrew - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html