-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I'm using FreeRADIUS 1.1.4 compiled from sources on Debian Etch.
I backend against LDAP with hashed password. Now I'm trying to configure
authentication to use with WPA, but it segfaults on calling PAP:
# radiusd -Xxxx 2>&1
...
rad_recv: Access-Request packet from host 192.168.1.250:3074, id=0,
length=125
User-Name = "testuser"
NAS-IP-Address = 192.168.1.250
Called-Station-Id = "00c0..."
Calling-Station-Id = "001..."
NAS-Identifier = "00c..."
NAS-Port = 223
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x020...
Message-Authenticator = 0x431...
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
modsingle[authorize]: calling preprocess (rlm_preprocess) for request 0
modsingle[authorize]: returned from preprocess (rlm_preprocess) for
request 0
modcall[authorize]: module "preprocess" returns ok for request 0
modsingle[authorize]: calling chap (rlm_chap) for request 0
modsingle[authorize]: returned from chap (rlm_chap) for request 0
modcall[authorize]: module "chap" returns noop for request 0
modsingle[authorize]: calling mschap (rlm_mschap) for request 0
modsingle[authorize]: returned from mschap (rlm_mschap) for request 0
modcall[authorize]: module "mschap" returns noop for request 0
modsingle[authorize]: calling suffix (rlm_realm) for request 0
rlm_realm: No '@' in User-Name = "testuser", looking up realm NULL
rlm_realm: No such realm "NULL"
modsingle[authorize]: returned from suffix (rlm_realm) for request 0
modcall[authorize]: module "suffix" returns noop for request 0
modsingle[authorize]: calling eap (rlm_eap) for request 0
rlm_eap: EAP packet type response id 1 length 11
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modsingle[authorize]: returned from eap (rlm_eap) for request 0
modcall[authorize]: module "eap" returns updated for request 0
modsingle[authorize]: calling files (rlm_files) for request 0
users: Matched entry DEFAULT at line 152
modsingle[authorize]: returned from files (rlm_files) for request 0
modcall[authorize]: module "files" returns ok for request 0
modsingle[authorize]: calling ldap (rlm_ldap) for request 0
rlm_ldap: - authorize
rlm_ldap: performing user authorization for testuser
radius_xlat: '(uid=testuser)'
radius_xlat: 'dc=aldu,dc=net'
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: attempting LDAP reconnection
rlm_ldap: (re)connect to ldap.laurelin.aldu.net:389, authentication 0
rlm_ldap: bind as cn=radius,dc=aldu,dc=net/PASSWORD to
ldap.laurelin.aldu.net:389
rlm_ldap: waiting for bind result ...
rlm_ldap: Bind was successful
rlm_ldap: performing search in dc=aldu,dc=net, with filter (uid=testuser)
rlm_ldap: checking if remote access for testuser is allowed by dialupAccess
rlm_ldap: looking for check items in directory...
rlm_ldap: Adding userPassword as User-Password, value
{md5}rL0Y20zC+Fzt72VPzMSk2A== & op=21
rlm_ldap: looking for reply items in directory...
rlm_ldap: user testuser authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
modsingle[authorize]: returned from ldap (rlm_ldap) for request 0
modcall[authorize]: module "ldap" returns ok for request 0
modsingle[authorize]: calling pap (rlm_pap) for request 0
Segmentation fault
Some configuration snippets (maybe not useful, but the entire file would
have been too long I guess):
radiusd.conf:
...
modules {
..
pap {
auto_header = yes
}
...
}
...
authorize {
...
ldap
pap
}
authenticate {
Auth-Type PAP {
pap
}
...
}
...
If I revert the password to clear-text on LDAP, it runs fine and
authenticate.
Any ideas?
Thank you,
Giovanni Lovato
- --
www.aldu.net/~heruan
[EMAIL PROTECTED]
ldaps://pgpkeys.aldu.net
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
iD8DBQFFygRYaWLXrn9dopwRAjqCAJ9S0ztPnbdnFh4rR5UDkUt25Ix8lACfbBAf
7FY2dwyMEGVi8LTkvuIvhNs=
=HQjo
-----END PGP SIGNATURE-----
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
