> But the output now is: > > rad_recv: Access-Request packet from host 127.0.0.1:1030, > id=65, length=54 > Service-Type = Framed-User > Framed-Protocol = PPP > User-Name = "peppeska" > NAS-IP-Address = 127.0.0.1 > NAS-Port = 0 > > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > - ->Where is User-Password attribute? > - ------------------------------------------------
A good question indeed, that one should be asked to your NAS ;-) It's up to the NAS to send User-Password: unless it is setup to do something else (for instance MSCHAP). Have you setup ppp to use mschap (require-mschap-v2 option) ? Are you using the radiusclient library ? If yes, could you check that you radiusclient dictionnary file includes Microsoft attributes: * check the "dictionary <path-to-dict-file>" line of /etc/radiusclient-ng/radiusclient.conf file (or /etc/radiusclient/radiusclient.conf file) * check that the file <path-to-dict-file> contains a reference to other dictionnary files such as: INCLUDE /usr/share/radiusclient-ng/dictionary.merit INCLUDE /usr/share/radiusclient-ng/dictionary.microsoft * check that you have these 2 extra dictionnary files (especially the microsoft one) ==> I've attached the two files Regards, Thibault > Processing the authorize section of radiusd.conf > modcall: entering group authorize for request 0 > modcall[authorize]: module "preprocess" returns ok for request 0 > modcall[authorize]: module "mschap" returns noop for request 0 > rlm_realm: No '@' in User-Name = "peppeska", looking up realm NULL > rlm_realm: No such realm "NULL" > modcall[authorize]: module "suffix" returns noop for request 0 > rlm_eap: No EAP-Message, not doing EAP > modcall[authorize]: module "eap" returns noop for request 0 > users: Matched entry DEFAULT at line 155 > users: Matched entry DEFAULT at line 173 > users: Matched entry DEFAULT at line 185 > modcall[authorize]: module "files" returns ok for request 0 > rlm_ldap: - authorize > rlm_ldap: performing user authorization for peppeska > radius_xlat: '(cn=peppeska)' > radius_xlat: 'dc=example' > rlm_ldap: ldap_get_conn: Checking Id: 0 > rlm_ldap: ldap_get_conn: Got Id: 0 > rlm_ldap: attempting LDAP reconnection > rlm_ldap: (re)connect to localhost:389, authentication 0 > rlm_ldap: bind as cn=admin,dc=example/root to localhost:389 > rlm_ldap: waiting for bind result ... > rlm_ldap: Bind was successful > rlm_ldap: performing search in dc=example, with filter (cn=peppeska) > rlm_ldap: looking for check items in directory... > rlm_ldap: looking for reply items in directory... > rlm_ldap: user peppeska authorized to use remote access > rlm_ldap: ldap_release_conn: Release Id: 0 > modcall[authorize]: module "ldap" returns ok for request 0 > modcall: leaving group authorize (returns ok) for request 0 > rad_check_password: Found Auth-Type LDAP > auth: type "LDAP" > Processing the authenticate section of radiusd.conf > modcall: entering group LDAP for request 0 > rlm_ldap: - authenticate > rlm_ldap: Attribute "User-Password" is required for > authentication. > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > - -> mmmmm depend to ppp version? it's possible? > - > ---------------------------------------------------------------------- > modcall[authenticate]: module "ldap" returns invalid for request 0 > modcall: leaving group LDAP (returns invalid) for request 0 > auth: Failed to validate the user. > Login incorrect: [peppeska/<no User-Password attribute>] > (from client localhost port 0) Delaying request 0 for 1 > seconds Finished request 0 Going to the next request > - --- Walking the entire request list --- > Waking up in 1 seconds... > - --- Walking the entire request list --- > Sending Access-Reject of id 65 to 127.0.0.1 port 1030 > Waking up in 2 seconds... > - --- Walking the entire request list --- > Cleaning up request 0 ID 65 with timestamp 4600fb5f > Nothing to do. Sleeping until we see a request. > > > > ok.. I my ldap.attrmap contain: > > checkItem User-Password lmPassword > checkItem LM-Password lmPassword > checkItem NT-Password ntPassword > > And the ldap section in radiusd.conf contain: > > password_attribute = User-Password > > > What's the problem? > > > - -- > <<<<---------------------------------------------------------->>>> > |Giuseppe Moscato aka peppeska - Linux User - no html messages---| > > |[EMAIL PROTECTED] - http://peppeska.altervista.org------| > > |Fingerprint = 90DC 05A8 2D65 BC04 BD1B 4C07 C389 434B 3201 319D| > <<<<---------------------------------------------------------->>>> > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.3 (GNU/Linux) > Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org > > iD8DBQFGAP+4kA6hcnFZI/YRAgF+AKC7+GLE/xihS1DkdHcHk9pvTINsOgCgm4s8 > ejjPb/Qg2uW/D2ddqSWj0Ao= > =cvka > -----END PGP SIGNATURE----- > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html >
dictionary.merit
Description: Binary data
dictionary.microsoft
Description: Binary data
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html