Me again guys, I have adjusted my config files etc (see links betow), but now Im stuck on this new error and it has me a bit baffled.
Freeradius 1.1.3 smb.conf http://pastebin.ca/437671 radius.conf http://pastebin.ca/437670 clients.conf http://pastebin.ca/437668 eap.conf http://pastebin.ca/437667 krb5.conf http://pastebin.ca/437666 I start the wireless connection on XP, enter in user and password, freeradius runs the ntlm_auth command but then it spits out this huuuuge message. Its so big the terminals buffer isnt big enough, but I have copied and pasted everything I can. Error highlights (stuff that I think may be causing issues). SSL ERROR: (other): SSL negotiation finished successfully rlm_eap: SSL error error:00000000:lib(0):func(0):reason(0) Failure to validate user: Exec-Program: /usr/bin/ntlm_auth --request-nt-key --domain= --username=Administrator --challenge=bb4c397988ae6ebc --nt-response=4a7cd9abdfc2f92680c182845a937f4beb6646c4cddd7de1 Exec-Program output: No such user (0xc0000064) Exec-Program-Wait: plaintext: No such user (0xc0000064) Exec-Program: returned: 1 rlm_mschap: External script failed. rlm_mschap: FAILED: MS-CHAP2-Response is incorrect modcall[authenticate]: module "mschap" returns reject for request 6 modcall: leaving group MS-CHAP (returns reject) for request 6 rlm_eap: Freeing handler modcall[authenticate]: module "eap" returns reject for request 6 modcall: leaving group authenticate (returns reject) for request 6 auth: Failed to validate the user. PEAP Failure: PEAP: Tunneled authentication was rejected. rlm_eap_peap: FAILURE [EMAIL PROTECTED] ~]# radiusd -X Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /etc/raddb/proxy.conf Config: including file: /etc/raddb/clients.conf Config: including file: /etc/raddb/snmp.conf Config: including file: /etc/raddb/eap.conf main: prefix = "/usr" main: localstatedir = "/var" main: logdir = "/var/log/radius" main: libdir = "/usr/lib" main: radacctdir = "/var/log/radius/radacct" main: hostname_lookups = no main: snmp = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/var/log/radius/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/var/run/radiusd/radiusd.pid" main: user = "radiusd" main: group = "radiusd" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = no proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/lib Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "crypt" Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = no mschap: require_strong = no mschap: with_ntdomain_hack = yes mschap: passwd = "(null)" mschap: ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --domain=%{mschap:NT-Domain} --username=%{mschap:User-Name} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" Module: Instantiated mschap (mschap) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "/etc/shadow" unix: group = "(null)" unix: radwtmp = "/var/log/radius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded eap eap: default_eap_type = "peap" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc tls: rsa_key_exchange = no tls: dh_key_exchange = yes tls: rsa_key_length = 512 tls: dh_key_length = 512 tls: verify_depth = 0 tls: CA_path = "(null)" tls: pem_file_type = yes tls: private_key_file = "/etc/raddb/certs/cert-srv.pem" tls: certificate_file = "/etc/raddb/certs/cert-srv.pem" tls: CA_file = "/etc/raddb/certs/demoCA/cacert.pem" tls: private_key_password = "whatever" tls: dh_file = "/etc/raddb/certs/dh" tls: random_file = "/dev/urandom" tls: fragment_size = 1024 tls: include_length = yes tls: check_crl = no tls: check_cert_cn = "(null)" tls: cipher_list = "(null)" tls: check_cert_issuer = "(null)" rlm_eap_tls: Loading the certificate file as a chain rlm_eap: Loaded and initialized type tls peap: default_eap_type = "mschapv2" peap: copy_request_to_tunnel = no peap: use_tunneled_reply = no peap: proxy_tunneled_request_as_eap = yes rlm_eap: Loaded and initialized type peap mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/etc/raddb/huntgroups" preprocess: hints = "/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no preprocess: with_alvarion_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = "/etc/raddb/users" files: acctusersfile = "/etc/raddb/acct_users" files: preproxy_usersfile = "/etc/raddb/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded detail detail: detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded radutmp radutmp: filename = "/var/log/radius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Listening on authentication *:1812 Listening on accounting *:1813 Ready to process requests. -----------------------------------------snip----------------------------------------------------------- read_config_files: reading dictionary Message-Authenticator = 0x11c04a4cd7b37155c0cfb0a458f157f2 EAP-Message = 0x020400061900 NAS-Port-Type = Wireless-802.11 NAS-Port = 683 [EMAIL PROTECTED] ~]# radiusd -X Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /etc/raddb/proxy.conf Config: including file: /etc/raddb/clients.conf Config: including file: /etc/raddb/snmp.conf Config: including file: /etc/raddb/eap.conf main: prefix = "/usr" main: localstatedir = "/var" main: logdir = "/var/log/radius" main: libdir = "/usr/lib" main: radacctdir = "/var/log/radius/radacct" main: hostname_lookups = no main: snmp = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/var/log/radius/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/var/run/radiusd/radiusd.pid" main: user = "radiusd" main: group = "radiusd" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = no proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 State = 0x2c48e30296c956862631dbaea6c6ed4b NAS-IP-Address = 10.1.1.110 NAS-Identifier = "ap-test" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 2 modcall[authorize]: module "preprocess" returns ok for request 2 modcall[authorize]: module "chap" returns noop for request 2 modcall[authorize]: module "mschap" returns noop for request 2 rlm_realm: No '@' in User-Name = "Administrator", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 2 rlm_eap: EAP packet type response id 4 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 2 users: Matched entry DEFAULT at line 152 modcall[authorize]: module "files" returns ok for request 2 modcall: leaving group authorize (returns updated) for request 2 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 2 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake fragment handler eaptls_verify returned 1 eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 2 modcall: leaving group authenticate (returns handled) for request 2 Sending Access-Challenge of id 207 to 10.1.1.110 port 1645 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x2e3c05429a7db3fb59e0e5d5447c7ed1 Finished request 2 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.1.1.110:1645, id=208, length=336 User-Name = "Administrator" Framed-MTU = 1400 Called-Station-Id = "001a.6c5f.5100" Calling-Station-Id = "0040.96a1.8a54" Service-Type = Login-User Message-Authenticator = 0x029353c67ab0eac37f9d70d2ef5f95df EAP-Message = 0x020500c01980000000b6160301008610000082008065ea7894aafd6fc4e4214bd9467d645f4f41003afc7e486366640507f16376197206a40fb433d80b4af9be3dbd439494f5f37eef232c541bef5725215a6ed4f17a69080ec4836f4a7e60ca400b907cbd33df9c554479770cc1f386bd9296557b5c4fe2b0baa5aa09b55475fa01e791b87d5165e6c6fa5a4ba0b7dd9f2da2c46f14030100010116030100201911f4857c16cce45a0dc84e791aa2b951ac3d9298aa6eb44ce7f3ff5249c745 NAS-Port-Type = Wireless-802.11 NAS-Port = 683 State = 0x2e3c05429a7db3fb59e0e5d5447c7ed1 NAS-IP-Address = 10.1.1.110 NAS-Identifier = "ap-test" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 3 modcall[authorize]: module "preprocess" returns ok for request 3 modcall[authorize]: module "chap" returns noop for request 3 modcall[authorize]: module "mschap" returns noop for request 3 rlm_realm: No '@' in User-Name = "Administrator", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 3 rlm_eap: EAP packet type response id 5 length 192 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 3 users: Matched entry DEFAULT at line 152 modcall[authorize]: module "files" returns ok for request 3 modcall: leaving group authorize (returns updated) for request 3 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 3 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 rlm_eap_tls: <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange TLS_accept: SSLv3 read client key exchange A rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001] rlm_eap_tls: <<< TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 read finished A rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001] TLS_accept: SSLv3 write change cipher spec A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 write finished A TLS_accept: SSLv3 flush data (other): SSL negotiation finished successfully rlm_eap: SSL error error:00000000:lib(0):func(0):reason(0) SSL Connection Established eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 3 modcall: leaving group authenticate (returns handled) for request 3 Sending Access-Challenge of id 208 to 10.1.1.110 port 1645 EAP-Message = 0x01060031190014030100010116030100203814f45afe407392e87efb6983a8870981a942c2f81ed324195f71a524de0089 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xd17667e503f66ca288c2db35cb34e6c2 Finished request 3 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.1.1.110:1645, id=209, length=150 User-Name = "Administrator" Framed-MTU = 1400 Called-Station-Id = "001a.6c5f.5100" Calling-Station-Id = "0040.96a1.8a54" Service-Type = Login-User Message-Authenticator = 0x0627ca644456709d58ed18a2ce57831b EAP-Message = 0x020600061900 NAS-Port-Type = Wireless-802.11 NAS-Port = 683 State = 0xd17667e503f66ca288c2db35cb34e6c2 NAS-IP-Address = 10.1.1.110 NAS-Identifier = "ap-test" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 4 modcall[authorize]: module "preprocess" returns ok for request 4 modcall[authorize]: module "chap" returns noop for request 4 modcall[authorize]: module "mschap" returns noop for request 4 rlm_realm: No '@' in User-Name = "Administrator", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 4 rlm_eap: EAP packet type response id 6 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 4 users: Matched entry DEFAULT at line 152 modcall[authorize]: module "files" returns ok for request 4 modcall: leaving group authorize (returns updated) for request 4 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 4 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake is finished eaptls_verify returned 3 eaptls_process returned 3 rlm_eap_peap: EAPTLS_SUCCESS modcall[authenticate]: module "eap" returns handled for request 4 modcall: leaving group authenticate (returns handled) for request 4 Sending Access-Challenge of id 209 to 10.1.1.110 port 1645 EAP-Message = 0x01070020190017030100158a69836250fab5a87e8dd70c7200f0fbf64a042f7b Message-Authenticator = 0x00000000000000000000000000000000 State = 0x2b41d7e3a2939636a6f894a7a671d2bb Finished request 4 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.1.1.110:1645, id=210, length=185 User-Name = "Administrator" Framed-MTU = 1400 Called-Station-Id = "001a.6c5f.5100" Calling-Station-Id = "0040.96a1.8a54" Service-Type = Login-User Message-Authenticator = 0x391651fddd34e113abc34ad2ad91aeea EAP-Message = 0x020700291900170301001e12f79f555717d8b2209a14f5d23824e4d072bc00cca4d91573805ac59bdb NAS-Port-Type = Wireless-802.11 NAS-Port = 683 State = 0x2b41d7e3a2939636a6f894a7a671d2bb NAS-IP-Address = 10.1.1.110 NAS-Identifier = "ap-test" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 5 modcall[authorize]: module "preprocess" returns ok for request 5 modcall[authorize]: module "chap" returns noop for request 5 modcall[authorize]: module "mschap" returns noop for request 5 rlm_realm: No '@' in User-Name = "Administrator", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 5 rlm_eap: EAP packet type response id 7 length 41 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 5 users: Matched entry DEFAULT at line 152 modcall[authorize]: module "files" returns ok for request 5 modcall: leaving group authorize (returns updated) for request 5 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 5 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: Identity - Administrator rlm_eap_peap: Tunneled data is valid. PEAP: Got tunneled EAP-Message EAP-Message = 0x020700120141646d696e6973747261746f72 PEAP: Got tunneled identity of Administrator PEAP: Setting default EAP type for tunneled EAP session. PEAP: Setting User-Name to Administrator PEAP: Sending tunneled request EAP-Message = 0x020700120141646d696e6973747261746f72 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "Administrator" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 5 modcall[authorize]: module "preprocess" returns ok for request 5 modcall[authorize]: module "chap" returns noop for request 5 modcall[authorize]: module "mschap" returns noop for request 5 rlm_realm: No '@' in User-Name = "Administrator", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 5 rlm_eap: EAP packet type response id 7 length 18 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 5 users: Matched entry DEFAULT at line 152 modcall[authorize]: module "files" returns ok for request 5 modcall: leaving group authorize (returns updated) for request 5 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 5 rlm_eap: EAP Identity rlm_eap: processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge modcall[authenticate]: module "eap" returns handled for request 5 modcall: leaving group authenticate (returns handled) for request 5 PEAP: Got tunneled reply RADIUS code 11 EAP-Message = 0x010800271a01080022106bff528cee3735f159e2e423b9a1b58741646d696e6973747261746f72 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xf537d300d4e8efd604854f40dc640251 PEAP: Processing from tunneled session code 0x8d67e68 11 EAP-Message = 0x010800271a01080022106bff528cee3735f159e2e423b9a1b58741646d696e6973747261746f72 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xf537d300d4e8efd604854f40dc640251 PEAP: Got tunneled Access-Challenge modcall[authenticate]: module "eap" returns handled for request 5 modcall: leaving group authenticate (returns handled) for request 5 Sending Access-Challenge of id 210 to 10.1.1.110 port 1645 EAP-Message = 0x0108003e19001703010033f2767694f2b314c765de3196f34fcfd2224b87519edec105cc14aa8774d2464c881507edd375a80b4bed4418f9f0534af45d53 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4a58316d09a226fca75a2395385a60a1 Finished request 5 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.1.1.110:1645, id=211, length=239 User-Name = "Administrator" Framed-MTU = 1400 Called-Station-Id = "001a.6c5f.5100" Calling-Station-Id = "0040.96a1.8a54" Service-Type = Login-User Message-Authenticator = 0x1dba61d8c8627129899a9a3203e6e37b EAP-Message = 0x0208005f19001703010054757bdab4a9263e10c6d8a9691c16e0f9cafc9e8a266dbd56a6706817802c616bd9e8132774fa54331a15f447baa3a5e0bf1afe52716c41b5a5d6d5fd87067dc6bb545b2c76c2a58ef5b045b2e2f67d57b1a99c95 NAS-Port-Type = Wireless-802.11 NAS-Port = 683 State = 0x4a58316d09a226fca75a2395385a60a1 NAS-IP-Address = 10.1.1.110 NAS-Identifier = "ap-test" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 6 modcall[authorize]: module "preprocess" returns ok for request 6 modcall[authorize]: module "chap" returns noop for request 6 modcall[authorize]: module "mschap" returns noop for request 6 rlm_realm: No '@' in User-Name = "Administrator", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 6 rlm_eap: EAP packet type response id 8 length 95 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 6 users: Matched entry DEFAULT at line 152 modcall[authorize]: module "files" returns ok for request 6 modcall: leaving group authorize (returns updated) for request 6 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 6 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: EAP type mschapv2 rlm_eap_peap: Tunneled data is valid. PEAP: Got tunneled EAP-Message EAP-Message = 0x020800481a0208004331bbc709898ccd4b9b3e8de0e0257783e100000000000000004a7cd9abdfc2f92680c182845a937f4beb6646c4cddd7de10041646d696e6973747261746f72 PEAP: Setting User-Name to Administrator PEAP: Adding old state with f5 37 PEAP: Sending tunneled request EAP-Message = 0x020800481a0208004331bbc709898ccd4b9b3e8de0e0257783e100000000000000004a7cd9abdfc2f92680c182845a937f4beb6646c4cddd7de10041646d696e6973747261746f72 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "Administrator" State = 0xf537d300d4e8efd604854f40dc640251 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 6 modcall[authorize]: module "preprocess" returns ok for request 6 modcall[authorize]: module "chap" returns noop for request 6 modcall[authorize]: module "mschap" returns noop for request 6 rlm_realm: No '@' in User-Name = "Administrator", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 6 rlm_eap: EAP packet type response id 8 length 72 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 6 users: Matched entry DEFAULT at line 152 modcall[authorize]: module "files" returns ok for request 6 modcall: leaving group authorize (returns updated) for request 6 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 6 rlm_eap: Request found, released from the list rlm_eap: EAP/mschapv2 rlm_eap: processing type mschapv2 Processing the authenticate section of radiusd.conf modcall: entering group MS-CHAP for request 6 rlm_mschap: No User-Password configured. Cannot create LM-Password. rlm_mschap: No User-Password configured. Cannot create NT-Password. rlm_mschap: Told to do MS-CHAPv2 for Administrator with NT-Password radius_xlat: Running registered xlat function of module mschap for string 'NT-Domain' rlm_mschap: No NT-Domain was found in the User-Name. radius_xlat: Running registered xlat function of module mschap for string 'User-Name' radius_xlat: Running registered xlat function of module mschap for string 'Challenge' mschap2: 6b radius_xlat: Running registered xlat function of module mschap for string 'NT-Response' radius_xlat: '/usr/bin/ntlm_auth --request-nt-key --domain= --username=Administrator --challenge=bb4c397988ae6ebc --nt-response=4a7cd9abdfc2f92680c182845a937f4beb6646c4cddd7de1' Exec-Program: /usr/bin/ntlm_auth --request-nt-key --domain= --username=Administrator --challenge=bb4c397988ae6ebc --nt-response=4a7cd9abdfc2f92680c182845a937f4beb6646c4cddd7de1 Exec-Program output: No such user (0xc0000064) Exec-Program-Wait: plaintext: No such user (0xc0000064) Exec-Program: returned: 1 rlm_mschap: External script failed. rlm_mschap: FAILED: MS-CHAP2-Response is incorrect modcall[authenticate]: module "mschap" returns reject for request 6 modcall: leaving group MS-CHAP (returns reject) for request 6 rlm_eap: Freeing handler modcall[authenticate]: module "eap" returns reject for request 6 modcall: leaving group authenticate (returns reject) for request 6 auth: Failed to validate the user. PEAP: Got tunneled reply RADIUS code 3 MS-CHAP-Error = "\010E=691 R=1" EAP-Message = 0x04080004 Message-Authenticator = 0x00000000000000000000000000000000 PEAP: Processing from tunneled session code 0x8d67708 3 MS-CHAP-Error = "\010E=691 R=1" EAP-Message = 0x04080004 Message-Authenticator = 0x00000000000000000000000000000000 PEAP: Tunneled authentication was rejected. rlm_eap_peap: FAILURE modcall[authenticate]: module "eap" returns handled for request 6 modcall: leaving group authenticate (returns handled) for request 6 Sending Access-Challenge of id 211 to 10.1.1.110 port 1645 EAP-Message = 0x010900261900170301001b2466fb337d6515701d17bf6ba992a265c5358d028de8eb11f9c8c1 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xaadc7bbf54e267f09efe8524cd195aa2 Finished request 6 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.1.1.110:1645, id=212, length=182 User-Name = "Administrator" Framed-MTU = 1400 Called-Station-Id = "001a.6c5f.5100" Calling-Station-Id = "0040.96a1.8a54" Service-Type = Login-User Message-Authenticator = 0xe97b3122d0fb931a13954986b7b43152 EAP-Message = 0x020900261900170301001b9589405a87362f7b801540c2b914ad3b2b2ee05b0e12c5055c7f05 NAS-Port-Type = Wireless-802.11 NAS-Port = 683 State = 0xaadc7bbf54e267f09efe8524cd195aa2 NAS-IP-Address = 10.1.1.110 NAS-Identifier = "ap-test" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 7 modcall[authorize]: module "preprocess" returns ok for request 7 modcall[authorize]: module "chap" returns noop for request 7 modcall[authorize]: module "mschap" returns noop for request 7 rlm_realm: No '@' in User-Name = "Administrator", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 7 rlm_eap: EAP packet type response id 9 length 38 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 7 users: Matched entry DEFAULT at line 152 modcall[authorize]: module "files" returns ok for request 7 modcall: leaving group authorize (returns updated) for request 7 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 7 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: Received EAP-TLV response. rlm_eap_peap: Tunneled data is valid. rlm_eap_peap: Had sent TLV failure. User was rejcted rejected earlier in this session. rlm_eap: Handler failed in EAP/peap rlm_eap: Failed in EAP select modcall[authenticate]: module "eap" returns invalid for request 7 modcall: leaving group authenticate (returns invalid) for request 7 auth: Failed to validate the user. Delaying request 7 for 1 seconds Finished request 7 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.1.1.110:1645, id=212, length=182 Sending Access-Reject of id 212 to 10.1.1.110 port 1645 EAP-Message = 0x04090004 Message-Authenticator = 0x00000000000000000000000000000000 --- Walking the entire request list --- Cleaning up request 0 ID 205 with timestamp 461f09c0 Cleaning up request 1 ID 206 with timestamp 461f09c0 Cleaning up request 2 ID 207 with timestamp 461f09c0 Cleaning up request 3 ID 208 with timestamp 461f09c0 Cleaning up request 4 ID 209 with timestamp 461f09c0 Cleaning up request 5 ID 210 with timestamp 461f09c0 Cleaning up request 6 ID 211 with timestamp 461f09c0 Cleaning up request 7 ID 212 with timestamp 461f09c0 Nothing to do. Sleeping until we see a request. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html