Login OK: [tester] (from client test-network port 1 cli 10.0.0.1) Sending Access-Accept of id 27 to 10.0.0.2:1645
You have "got in". But you haven't returned any radius attributes. You need to return something like Service-Type = Administrative-User or NAS-Prompt-User so NAS knows what to do with the user. Ivan Kalik Kaliik Informatika ISP Dana 25/4/2007, "Norman Zhang" <[EMAIL PROTECTED]> piše: >Dennis Skinner wrote: >> Make sure you are *only* using PAP. CHAP encrypts the password over the >> wire and you cannot compare crypt to crypt. One of them needs to be >> cleartext (this is a limitation of encryption, not FreeRADIUS). See the >> table here: >> >> http://deployingradius.com/documents/protocols/compatibility.html >> >> (you are using Unix Crypt). > > >I changed > >pap { > encryption_scheme = clear # was crypt >} > >chap { > authtype = pap # was CHAP >} > >pam { > pam_auth = radiusd >} > >unix { > cache = no > cache_reload = 600 > passwd = /etc/passwd > shadow = /etc/shadow > group = /etc/group > radwtmp = ${logdir}/radwtmp >} > >but I still cannot get in. > >rad_recv: Access-Request packet from host 10.0.0.2:1645, id=27, length=79 > NAS-IP-Address = 10.0.0.2 > NAS-Port = 1 > NAS-Port-Type = Virtual > User-Name = "tester" > Calling-Station-Id = "10.0.0.1" > User-Password = "testing123" > Processing the authorize section of radiusd.conf >modcall: entering group authorize for request 0 > modcall[authorize]: module "preprocess" returns ok for request 0 > modcall[authorize]: module "chap" returns noop for request 0 > modcall[authorize]: module "mschap" returns noop for request 0 > rlm_realm: No '@' in User-Name = "tester", looking up realm NULL > rlm_realm: No such realm "NULL" > modcall[authorize]: module "suffix" returns noop for request 0 > rlm_eap: No EAP-Message, not doing EAP > modcall[authorize]: module "eap" returns noop for request 0 > users: Matched DEFAULT at 152 > modcall[authorize]: module "files" returns ok for request 0 >modcall: group authorize returns ok for request 0 > rad_check_password: Found Auth-Type System >auth: type "System" > Processing the authenticate section of radiusd.conf >modcall: entering group authenticate for request 0 > modcall[authenticate]: module "unix" returns ok for request 0 >modcall: group authenticate returns ok for request 0 >Login OK: [tester] (from client test-network port 1 cli 10.0.0.1) >Sending Access-Accept of id 27 to 10.0.0.2:1645 >Finished request 0 >Going to the next request > >--- > >Starting - reading configuration files ... >reread_config: reading radiusd.conf >Config: including file: /etc/raddb/proxy.conf >Config: including file: /etc/raddb/clients.conf >Config: including file: /etc/raddb/snmp.conf >Config: including file: /etc/raddb/eap.conf >Config: including file: /etc/raddb/sql.conf > main: prefix = "/usr" > main: localstatedir = "/var" > main: logdir = "/var/log/radius" > main: libdir = "/usr/lib" > main: radacctdir = "/var/log/radius/radacct" > main: hostname_lookups = no > main: max_request_time = 30 > main: cleanup_delay = 5 > main: max_requests = 1024 > main: delete_blocked_requests = 0 > main: port = 0 > main: allow_core_dumps = no > main: log_stripped_names = no > main: log_file = "/var/log/radius/radius.log" > main: log_auth = yes > main: log_auth_badpass = no > main: log_auth_goodpass = no > main: pidfile = "/var/run/radiusd/radiusd.pid" > main: user = "radiusd" > main: group = "radiusd" > main: usercollide = no > main: lower_user = "no" > main: lower_pass = "no" > main: nospace_user = "no" > main: nospace_pass = "no" > main: checkrad = "/usr/sbin/checkrad" > main: proxy_requests = yes > proxy: retry_delay = 5 > proxy: retry_count = 3 > proxy: synchronous = no > proxy: default_fallback = yes > proxy: dead_time = 120 > proxy: post_proxy_authorize = yes > proxy: wake_all_if_all_dead = no > security: max_attributes = 200 > security: reject_delay = 1 > security: status_server = no > main: debug_level = 0 >read_config_files: reading dictionary >read_config_files: reading naslist >Using deprecated naslist file. Support for this will go away soon. >read_config_files: reading clients >read_config_files: reading realms >radiusd: entering modules setup >Module: Library search path is /usr/lib >Module: Loaded exec > exec: wait = yes > exec: program = "(null)" > exec: input_pairs = "request" > exec: output_pairs = "(null)" > exec: packet_type = "(null)" >rlm_exec: Wait=yes but no output defined. Did you mean output=none? >Module: Instantiated exec (exec) >Module: Loaded expr >Module: Instantiated expr (expr) >Module: Loaded PAP > pap: encryption_scheme = "clear" >Module: Instantiated pap (pap) >Module: Loaded CHAP >Module: Instantiated chap (chap) >Module: Loaded MS-CHAP > mschap: use_mppe = yes > mschap: require_encryption = no > mschap: require_strong = no > mschap: with_ntdomain_hack = no > mschap: passwd = "(null)" > mschap: authtype = "MS-CHAP" > mschap: ntlm_auth = "(null)" >Module: Instantiated mschap (mschap) >Module: Loaded System > unix: cache = no > unix: passwd = "/etc/passwd" > unix: shadow = "/etc/shadow" > unix: group = "/etc/group" > unix: radwtmp = "/var/log/radius/radwtmp" > unix: usegroup = no > unix: cache_reload = 600 >Module: Instantiated unix (unix) >Module: Loaded eap > eap: default_eap_type = "md5" > eap: timer_expire = 60 > eap: ignore_unknown_eap_types = no > eap: cisco_accounting_username_bug = no >rlm_eap: Loaded and initialized type md5 >rlm_eap: Loaded and initialized type leap > gtc: challenge = "Password: " > gtc: auth_type = "PAP" >rlm_eap: Loaded and initialized type gtc > mschapv2: with_ntdomain_hack = no >rlm_eap: Loaded and initialized type mschapv2 >Module: Instantiated eap (eap) >Module: Loaded preprocess > preprocess: huntgroups = "/etc/raddb/huntgroups" > preprocess: hints = "/etc/raddb/hints" > preprocess: with_ascend_hack = no > preprocess: ascend_channels_per_line = 23 > preprocess: with_ntdomain_hack = no > preprocess: with_specialix_jetstream_hack = no > preprocess: with_cisco_vsa_hack = no >Module: Instantiated preprocess (preprocess) >Module: Loaded realm > realm: format = "suffix" > realm: delimiter = "@" > realm: ignore_default = no > realm: ignore_null = no >Module: Instantiated realm (suffix) >Module: Loaded files > files: usersfile = "/etc/raddb/users" > files: acctusersfile = "/etc/raddb/acct_users" > files: preproxy_usersfile = "/etc/raddb/preproxy_users" > files: compat = "no" >Module: Instantiated files (files) >Module: Loaded Acct-Unique-Session-Id > acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, >Client-IP-Address, NAS-Port" >Module: Instantiated acct_unique (acct_unique) >Module: Loaded detail > detail: detailfile = >"/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" > detail: detailperm = 384 > detail: dirperm = 493 > detail: locking = no >Module: Instantiated detail (detail) >Module: Loaded radutmp > radutmp: filename = "/var/log/radius/radutmp" > radutmp: username = "%{User-Name}" > radutmp: case_sensitive = yes > radutmp: check_with_nas = yes > radutmp: perm = 384 > radutmp: callerid = yes >Module: Instantiated radutmp (radutmp) >Listening on authentication *:1812 >Listening on accounting *:1813 >Listening on proxy *:1814 >Ready to process requests. > >- >List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html