>did you configure SecureW2 to allow new connections? Yes i tried both combinations, nothing is changed.
In addition to this when I enter correct username but wrong password, I got similar debug log which i lised below. I wasn't able to see any problem with ldap configuration because it works with radtest command. (That is when i entered correct usrname but wrong password, I got Access-Rejected message. When both of them was true, I got Access-Accepted) Is there a problem with my ldap configuration. Is there any weird message in my debug log? I am dealing with this thing about 20 days. Could anybody tell me whats wrong with it? Thanks in advance: My full debug log: (username was entered true, password was entered false ) ------------------------------------------------------------------------------------------------- ldap:~ # radiusd -X -A Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /etc/raddb/proxy.conf Config: including file: /etc/raddb/clients.conf Config: including file: /etc/raddb/snmp.conf Config: including file: /etc/raddb/eap.conf Config: including file: /etc/raddb/sql.conf main: prefix = "/usr" main: localstatedir = "/var" main: logdir = "/var/log/radius" main: libdir = "/usr/lib/freeradius" main: radacctdir = "/var/log/radius/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/var/log/radius/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/var/run/radiusd/radiusd.pid" main: user = "radiusd" main: group = "radiusd" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = no proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/lib/freeradius Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "crypt" Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = no mschap: require_strong = no mschap: with_ntdomain_hack = no mschap: passwd = "(null)" mschap: authtype = "MS-CHAP" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "(null)" unix: group = "(null)" unix: radwtmp = "/var/log/radius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded LDAP ldap: server = "ldap.anadolu.edu.tr" ldap: port = 389 ldap: net_timeout = 1 ldap: timeout = 4 ldap: timelimit = 3 ldap: identity = "" ldap: tls_mode = no ldap: start_tls = no ldap: tls_cacertfile = "(null)" ldap: tls_cacertdir = "(null)" ldap: tls_certfile = "(null)" ldap: tls_keyfile = "(null)" ldap: tls_randfile = "(null)" ldap: tls_require_cert = "allow" ldap: password = "" ldap: basedn = "ou=people,dc=anadolu,dc=edu,dc=tr" ldap: filter = "(uid=%u)" ldap: base_filter = "(objectclass=radiusprofile)" ldap: default_profile = "(null)" ldap: profile_attribute = "(null)" ldap: password_header = "(null)" ldap: password_attribute = "(null)" ldap: access_attr = "(null)" ldap: groupname_attribute = "cn" ldap: groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" ldap: groupmembership_attribute = "(null)" ldap: dictionary_mapping = "/etc/raddb/ldap.attrmap" ldap: ldap_debug = 0 ldap: ldap_connections_number = 5 ldap: compare_check_items = no ldap: access_attr_used_for_allow = yes ldap: do_xlat = yes ldap: edir_account_policy_check = yes ldap: set_auth_type = yes rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Creating new attribute ldap_1x-Ldap-Group rlm_ldap: Registering ldap_groupcmp for ldap_1x-Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap_1x rlm_ldap: Over-riding set_auth_type, as we're not listed in the "authenticate" section. rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port conns: 0x800d0420 Module: Instantiated ldap (ldap_1x) Module: Loaded eap eap: default_eap_type = "ttls" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc tls: rsa_key_exchange = no tls: dh_key_exchange = yes tls: rsa_key_length = 512 tls: dh_key_length = 512 tls: verify_depth = 0 tls: CA_path = "(null)" tls: pem_file_type = yes tls: private_key_file = "/etc/raddb/certs/server_keycert.pem" tls: certificate_file = "/etc/raddb/certs/server_keycert.pem" tls: CA_file = "/etc/raddb/certs/cacert.pem" tls: private_key_password = "1234" tls: dh_file = "/etc/raddb/certs/dh" tls: random_file = "/etc/raddb/certs/random" tls: fragment_size = 1024 tls: include_length = yes tls: check_crl = no tls: check_cert_cn = "(null)" rlm_eap_tls: Loading the certificate file as a chain rlm_eap: Loaded and initialized type tls ttls: default_eap_type = "md5" ttls: copy_request_to_tunnel = yes ttls: use_tunneled_reply = no rlm_eap: Loaded and initialized type ttls mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/etc/raddb/huntgroups" preprocess: hints = "/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = yes realm: ignore_null = yes Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = "/etc/raddb/users" files: acctusersfile = "/etc/raddb/acct_users" files: preproxy_usersfile = "/etc/raddb/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded detail detail: detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded radutmp radutmp: filename = "/var/log/radius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Listening on authentication *:1812 Listening on accounting *:1813 Ready to process requests. rad_recv: Access-Request packet from host 10.10.7.203:1645, id=146, length=139 User-Name = "tkiziloren" Framed-MTU = 1400 Called-Station-Id = "0017.0e85.f190" Calling-Station-Id = "0011.2fb9.d08b" Service-Type = Login-User Message-Authenticator = 0x4bf1be37ab5fc1598c68bd249777d10d EAP-Message = 0x0202000f01746b697a696c6f72656e NAS-Port-Type = Wireless-802.11 NAS-Port = 322 NAS-IP-Address = 10.10.7.203 NAS-Identifier = "testbaum" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "tkiziloren", skipping NULL due to config. modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: EAP packet type response id 2 length 15 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 0 users: Matched entry DEFAULT at line 29 modcall[authorize]: module "files" returns ok for request 0 rlm_ldap: - authorize rlm_ldap: performing user authorization for tkiziloren radius_xlat: '(uid=tkiziloren)' radius_xlat: 'ou=people,dc=anadolu,dc=edu,dc=tr' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to ldap.anadolu.edu.tr:389, authentication 0 rlm_ldap: bind as / to ldap.anadolu.edu.tr:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: performing search in ou=people,dc=anadolu,dc=edu,dc=tr, with filter (uid=tkiziloren) rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: user tkiziloren authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap_1x" returns ok for request 0 modcall: leaving group authorize (returns updated) for request 0 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 modcall[authenticate]: module "eap" returns handled for request 0 modcall: leaving group authenticate (returns handled) for request 0 Sending Access-Challenge of id 146 to 10.10.7.203 port 1645 EAP-Message = 0x010300061520 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0aacb6009ffcc2e6b40b7487d9b49dce Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.10.7.203:1645, id=147, length=202 User-Name = "tkiziloren" Framed-MTU = 1400 Called-Station-Id = "0017.0e85.f190" Calling-Station-Id = "0011.2fb9.d08b" Service-Type = Login-User Message-Authenticator = 0xec986e334fed0be253f43e2461d77e42 EAP-Message = 0x0203003c158000000032160301002d01000029030146cbafcad15f26ee9c399c30942cb9a40c438dfa3f0aeb13b9b68e7fd7fa6e64000002000a0100 NAS-Port-Type = Wireless-802.11 NAS-Port = 322 State = 0x0aacb6009ffcc2e6b40b7487d9b49dce NAS-IP-Address = 10.10.7.203 NAS-Identifier = "testbaum" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "mschap" returns noop for request 1 rlm_realm: No '@' in User-Name = "tkiziloren", skipping NULL due to config. modcall[authorize]: module "suffix" returns noop for request 1 rlm_eap: EAP packet type response id 3 length 60 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 1 users: Matched entry DEFAULT at line 29 modcall[authorize]: module "files" returns ok for request 1 rlm_ldap: - authorize rlm_ldap: performing user authorization for tkiziloren radius_xlat: '(uid=tkiziloren)' radius_xlat: 'ou=people,dc=anadolu,dc=edu,dc=tr' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=people,dc=anadolu,dc=edu,dc=tr, with filter (uid=tkiziloren) rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: user tkiziloren authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap_1x" returns ok for request 1 modcall: leaving group authorize (returns updated) for request 1 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 1 rlm_eap: Request found, released from the list rlm_eap: EAP/ttls rlm_eap: processing type ttls rlm_eap_ttls: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 (other): before/accept initialization TLS_accept: before/accept initialization rlm_eap_tls: <<< TLS 1.0 Handshake [length 002d], ClientHello TLS_accept: SSLv3 read client hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello TLS_accept: SSLv3 write server hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 05e7], Certificate TLS_accept: SSLv3 write certificate A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone TLS_accept: SSLv3 write server done A TLS_accept: SSLv3 flush data TLS_accept:error in SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode eaptls_process returned 13 modcall[authenticate]: module "eap" returns handled for request 1 modcall: leaving group authenticate (returns handled) for request 1 Sending Access-Challenge of id 147 to 10.10.7.203 port 1645 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x8100aa7e832714838afb5c85df7c60afaf107142a9e077659f216e0b0cee26180413d2ce23bd4551cb0e7243dbae482db8757502159b52b08f8776b1fef8110ea8798dc7bd0db591296d73e37cad9a07ad8b1c1db6360104861ae0405cab03544b1ae33633df6a5403c79bdde9ab57ed2dcfe191f5f34418b555c953351acc461ce70203010001a317301530130603551d25040c300a06082b06010505070301300d06092a864886f70d0101050500038181003c0a0c3e188348ce41725b4c062f8a8570a1bf407bb6ee3504b9df6a18e935fe2f8792c914c2eabadd85e6ea701ec99443a06e436152b7b9fd413cf44fbd09db68cdf3879c76ea673153 EAP-Message = 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 EAP-Message = 0x3130303530373130333734345a30818f310b30090603 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x2c09c8f35ddc35ecd609188a17165621 Finished request 1 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.10.7.203:1645, id=148, length=148 User-Name = "tkiziloren" Framed-MTU = 1400 Called-Station-Id = "0017.0e85.f190" Calling-Station-Id = "0011.2fb9.d08b" Service-Type = Login-User Message-Authenticator = 0x9b4e281f16c2c5d3cf691e6e195bea68 EAP-Message = 0x020400061500 NAS-Port-Type = Wireless-802.11 NAS-Port = 322 State = 0x2c09c8f35ddc35ecd609188a17165621 NAS-IP-Address = 10.10.7.203 NAS-Identifier = "testbaum" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 2 modcall[authorize]: module "preprocess" returns ok for request 2 modcall[authorize]: module "chap" returns noop for request 2 modcall[authorize]: module "mschap" returns noop for request 2 rlm_realm: No '@' in User-Name = "tkiziloren", skipping NULL due to config. modcall[authorize]: module "suffix" returns noop for request 2 rlm_eap: EAP packet type response id 4 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 2 users: Matched entry DEFAULT at line 29 modcall[authorize]: module "files" returns ok for request 2 rlm_ldap: - authorize rlm_ldap: performing user authorization for tkiziloren radius_xlat: '(uid=tkiziloren)' radius_xlat: 'ou=people,dc=anadolu,dc=edu,dc=tr' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=people,dc=anadolu,dc=edu,dc=tr, with filter (uid=tkiziloren) rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: user tkiziloren authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap_1x" returns ok for request 2 modcall: leaving group authorize (returns updated) for request 2 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 2 rlm_eap: Request found, released from the list rlm_eap: EAP/ttls rlm_eap: processing type ttls rlm_eap_ttls: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake fragment handler eaptls_verify returned 1 eaptls_process returned 13 modcall[authenticate]: module "eap" returns handled for request 2 modcall: leaving group authenticate (returns handled) for request 2 Sending Access-Challenge of id 148 to 10.10.7.203 port 1645 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x4b77db5093871b2203bf2271cb97b98cc169c03f4f67d7a01261d971dfddc176cce3a42e1dd1e37037060a528db7e8481722e222549b882a93cfa582a29df0f1b401a28e197772410a1f1016030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xb63cf9e5375c651683e69b8c2d8543fc Finished request 2 Going to the next request Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 146 with timestamp 4642d682 Cleaning up request 1 ID 147 with timestamp 4642d682 Cleaning up request 2 ID 148 with timestamp 4642d682 Nothing to do. Sleeping until we see a request. A.L.M.Buxey wrote: > > Hi, > >> However when i try to perform same task by using securew2 on XP client, >> it >> always shows "attempting to authenticate", > > did you configure SecureW2 to allow new connections? > > alan > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > > -- View this message in context: http://www.nabble.com/ttls-problem-tf3717596.html#a10408620 Sent from the FreeRadius - User mailing list archive at Nabble.com. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html