tevfik, Post the question in the SecureW2 forum, www.securew2.com/forum/. I will get back to you via the forum.
Regards, Tom tevfik schreef: >> did you configure SecureW2 to allow new connections? >> > > Yes i tried both combinations, nothing is changed. > > In addition to this when I enter correct username but wrong password, I got > similar debug log which i lised below. > > I wasn't able to see any problem with ldap configuration because it works > with radtest command. (That is when i entered correct usrname but wrong > password, I got Access-Rejected message. When both of them was true, I got > Access-Accepted) > > Is there a problem with my ldap configuration. Is there any weird message in > my debug log? > > I am dealing with this thing about 20 days. Could anybody tell me whats > wrong with it? > > Thanks in advance: > > My full debug log: (username was entered true, password was entered false ) > ------------------------------------------------------------------------------------------------- > ldap:~ # radiusd -X -A > Starting - reading configuration files ... > reread_config: reading radiusd.conf > Config: including file: /etc/raddb/proxy.conf > Config: including file: /etc/raddb/clients.conf > Config: including file: /etc/raddb/snmp.conf > Config: including file: /etc/raddb/eap.conf > Config: including file: /etc/raddb/sql.conf > main: prefix = "/usr" > main: localstatedir = "/var" > main: logdir = "/var/log/radius" > main: libdir = "/usr/lib/freeradius" > main: radacctdir = "/var/log/radius/radacct" > main: hostname_lookups = no > main: max_request_time = 30 > main: cleanup_delay = 5 > main: max_requests = 1024 > main: delete_blocked_requests = 0 > main: port = 0 > main: allow_core_dumps = no > main: log_stripped_names = no > main: log_file = "/var/log/radius/radius.log" > main: log_auth = no > main: log_auth_badpass = no > main: log_auth_goodpass = no > main: pidfile = "/var/run/radiusd/radiusd.pid" > main: user = "radiusd" > main: group = "radiusd" > main: usercollide = no > main: lower_user = "no" > main: lower_pass = "no" > main: nospace_user = "no" > main: nospace_pass = "no" > main: checkrad = "/usr/sbin/checkrad" > main: proxy_requests = yes > proxy: retry_delay = 5 > proxy: retry_count = 3 > proxy: synchronous = no > proxy: default_fallback = yes > proxy: dead_time = 120 > proxy: post_proxy_authorize = no > proxy: wake_all_if_all_dead = no > security: max_attributes = 200 > security: reject_delay = 1 > security: status_server = no > main: debug_level = 0 > read_config_files: reading dictionary > read_config_files: reading naslist > read_config_files: reading clients > read_config_files: reading realms > radiusd: entering modules setup > Module: Library search path is /usr/lib/freeradius > Module: Loaded exec > exec: wait = yes > exec: program = "(null)" > exec: input_pairs = "request" > exec: output_pairs = "(null)" > exec: packet_type = "(null)" > rlm_exec: Wait=yes but no output defined. Did you mean output=none? > Module: Instantiated exec (exec) > Module: Loaded expr > Module: Instantiated expr (expr) > Module: Loaded PAP > pap: encryption_scheme = "crypt" > Module: Instantiated pap (pap) > Module: Loaded CHAP > Module: Instantiated chap (chap) > Module: Loaded MS-CHAP > mschap: use_mppe = yes > mschap: require_encryption = no > mschap: require_strong = no > mschap: with_ntdomain_hack = no > mschap: passwd = "(null)" > mschap: authtype = "MS-CHAP" > mschap: ntlm_auth = "(null)" > Module: Instantiated mschap (mschap) > Module: Loaded System > unix: cache = no > unix: passwd = "(null)" > unix: shadow = "(null)" > unix: group = "(null)" > unix: radwtmp = "/var/log/radius/radwtmp" > unix: usegroup = no > unix: cache_reload = 600 > Module: Instantiated unix (unix) > Module: Loaded LDAP > ldap: server = "ldap.anadolu.edu.tr" > ldap: port = 389 > ldap: net_timeout = 1 > ldap: timeout = 4 > ldap: timelimit = 3 > ldap: identity = "" > ldap: tls_mode = no > ldap: start_tls = no > ldap: tls_cacertfile = "(null)" > ldap: tls_cacertdir = "(null)" > ldap: tls_certfile = "(null)" > ldap: tls_keyfile = "(null)" > ldap: tls_randfile = "(null)" > ldap: tls_require_cert = "allow" > ldap: password = "" > ldap: basedn = "ou=people,dc=anadolu,dc=edu,dc=tr" > ldap: filter = "(uid=%u)" > ldap: base_filter = "(objectclass=radiusprofile)" > ldap: default_profile = "(null)" > ldap: profile_attribute = "(null)" > ldap: password_header = "(null)" > ldap: password_attribute = "(null)" > ldap: access_attr = "(null)" > ldap: groupname_attribute = "cn" > ldap: groupmembership_filter = > "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" > ldap: groupmembership_attribute = "(null)" > ldap: dictionary_mapping = "/etc/raddb/ldap.attrmap" > ldap: ldap_debug = 0 > ldap: ldap_connections_number = 5 > ldap: compare_check_items = no > ldap: access_attr_used_for_allow = yes > ldap: do_xlat = yes > ldap: edir_account_policy_check = yes > ldap: set_auth_type = yes > rlm_ldap: Registering ldap_groupcmp for Ldap-Group > rlm_ldap: Creating new attribute ldap_1x-Ldap-Group > rlm_ldap: Registering ldap_groupcmp for ldap_1x-Ldap-Group > rlm_ldap: Registering ldap_xlat with xlat_name ldap_1x > rlm_ldap: Over-riding set_auth_type, as we're not listed in the > "authenticate" section. > rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap > rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ > rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ > rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type > rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use > rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id > rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id > rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password > rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password > rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT > rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration > rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type > rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol > rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address > rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask > rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route > rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing > rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id > rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU > rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression > rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host > rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service > rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port > rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number > rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id > rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network > rlm_ldap: LDAP radiusClass mapped to RADIUS Class > rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout > rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout > rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action > rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service > rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node > rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group > rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS > Framed-AppleTalk-Link > rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS > Framed-AppleTalk-Network > rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS > Framed-AppleTalk-Zone > rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit > rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port > conns: 0x800d0420 > Module: Instantiated ldap (ldap_1x) > Module: Loaded eap > eap: default_eap_type = "ttls" > eap: timer_expire = 60 > eap: ignore_unknown_eap_types = no > eap: cisco_accounting_username_bug = no > rlm_eap: Loaded and initialized type md5 > rlm_eap: Loaded and initialized type leap > gtc: challenge = "Password: " > gtc: auth_type = "PAP" > rlm_eap: Loaded and initialized type gtc > tls: rsa_key_exchange = no > tls: dh_key_exchange = yes > tls: rsa_key_length = 512 > tls: dh_key_length = 512 > tls: verify_depth = 0 > tls: CA_path = "(null)" > tls: pem_file_type = yes > tls: private_key_file = "/etc/raddb/certs/server_keycert.pem" > tls: certificate_file = "/etc/raddb/certs/server_keycert.pem" > tls: CA_file = "/etc/raddb/certs/cacert.pem" > tls: private_key_password = "1234" > tls: dh_file = "/etc/raddb/certs/dh" > tls: random_file = "/etc/raddb/certs/random" > tls: fragment_size = 1024 > tls: include_length = yes > tls: check_crl = no > tls: check_cert_cn = "(null)" > rlm_eap_tls: Loading the certificate file as a chain > rlm_eap: Loaded and initialized type tls > ttls: default_eap_type = "md5" > ttls: copy_request_to_tunnel = yes > ttls: use_tunneled_reply = no > rlm_eap: Loaded and initialized type ttls > mschapv2: with_ntdomain_hack = no > rlm_eap: Loaded and initialized type mschapv2 > Module: Instantiated eap (eap) > Module: Loaded preprocess > preprocess: huntgroups = "/etc/raddb/huntgroups" > preprocess: hints = "/etc/raddb/hints" > preprocess: with_ascend_hack = no > preprocess: ascend_channels_per_line = 23 > preprocess: with_ntdomain_hack = no > preprocess: with_specialix_jetstream_hack = no > preprocess: with_cisco_vsa_hack = no > Module: Instantiated preprocess (preprocess) > Module: Loaded realm > realm: format = "suffix" > realm: delimiter = "@" > realm: ignore_default = yes > realm: ignore_null = yes > Module: Instantiated realm (suffix) > Module: Loaded files > files: usersfile = "/etc/raddb/users" > files: acctusersfile = "/etc/raddb/acct_users" > files: preproxy_usersfile = "/etc/raddb/preproxy_users" > files: compat = "no" > Module: Instantiated files (files) > Module: Loaded Acct-Unique-Session-Id > acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, > Client-IP-Address, NAS-Port" > Module: Instantiated acct_unique (acct_unique) > Module: Loaded detail > detail: detailfile = > "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" > detail: detailperm = 384 > detail: dirperm = 493 > detail: locking = no > Module: Instantiated detail (detail) > Module: Loaded radutmp > radutmp: filename = "/var/log/radius/radutmp" > radutmp: username = "%{User-Name}" > radutmp: case_sensitive = yes > radutmp: check_with_nas = yes > radutmp: perm = 384 > radutmp: callerid = yes > Module: Instantiated radutmp (radutmp) > Listening on authentication *:1812 > Listening on accounting *:1813 > Ready to process requests. > rad_recv: Access-Request packet from host 10.10.7.203:1645, id=146, > length=139 > User-Name = "tkiziloren" > Framed-MTU = 1400 > Called-Station-Id = "0017.0e85.f190" > Calling-Station-Id = "0011.2fb9.d08b" > Service-Type = Login-User > Message-Authenticator = 0x4bf1be37ab5fc1598c68bd249777d10d > EAP-Message = 0x0202000f01746b697a696c6f72656e > NAS-Port-Type = Wireless-802.11 > NAS-Port = 322 > NAS-IP-Address = 10.10.7.203 > NAS-Identifier = "testbaum" > Processing the authorize section of radiusd.conf > modcall: entering group authorize for request 0 > modcall[authorize]: module "preprocess" returns ok for request 0 > modcall[authorize]: module "chap" returns noop for request 0 > modcall[authorize]: module "mschap" returns noop for request 0 > rlm_realm: No '@' in User-Name = "tkiziloren", skipping NULL due to > config. > modcall[authorize]: module "suffix" returns noop for request 0 > rlm_eap: EAP packet type response id 2 length 15 > rlm_eap: No EAP Start, assuming it's an on-going EAP conversation > modcall[authorize]: module "eap" returns updated for request 0 > users: Matched entry DEFAULT at line 29 > modcall[authorize]: module "files" returns ok for request 0 > rlm_ldap: - authorize > rlm_ldap: performing user authorization for tkiziloren > radius_xlat: '(uid=tkiziloren)' > radius_xlat: 'ou=people,dc=anadolu,dc=edu,dc=tr' > rlm_ldap: ldap_get_conn: Checking Id: 0 > rlm_ldap: ldap_get_conn: Got Id: 0 > rlm_ldap: attempting LDAP reconnection > rlm_ldap: (re)connect to ldap.anadolu.edu.tr:389, authentication 0 > rlm_ldap: bind as / to ldap.anadolu.edu.tr:389 > rlm_ldap: waiting for bind result ... > rlm_ldap: Bind was successful > rlm_ldap: performing search in ou=people,dc=anadolu,dc=edu,dc=tr, with > filter (uid=tkiziloren) > rlm_ldap: looking for check items in directory... > rlm_ldap: looking for reply items in directory... > rlm_ldap: user tkiziloren authorized to use remote access > rlm_ldap: ldap_release_conn: Release Id: 0 > modcall[authorize]: module "ldap_1x" returns ok for request 0 > modcall: leaving group authorize (returns updated) for request 0 > rad_check_password: Found Auth-Type EAP > auth: type "EAP" > Processing the authenticate section of radiusd.conf > modcall: entering group authenticate for request 0 > rlm_eap: EAP Identity > rlm_eap: processing type tls > rlm_eap_tls: Initiate > rlm_eap_tls: Start returned 1 > modcall[authenticate]: module "eap" returns handled for request 0 > modcall: leaving group authenticate (returns handled) for request 0 > Sending Access-Challenge of id 146 to 10.10.7.203 port 1645 > EAP-Message = 0x010300061520 > Message-Authenticator = 0x00000000000000000000000000000000 > State = 0x0aacb6009ffcc2e6b40b7487d9b49dce > Finished request 0 > Going to the next request > --- Walking the entire request list --- > Waking up in 6 seconds... > rad_recv: Access-Request packet from host 10.10.7.203:1645, id=147, > length=202 > User-Name = "tkiziloren" > Framed-MTU = 1400 > Called-Station-Id = "0017.0e85.f190" > Calling-Station-Id = "0011.2fb9.d08b" > Service-Type = Login-User > Message-Authenticator = 0xec986e334fed0be253f43e2461d77e42 > EAP-Message = > 0x0203003c158000000032160301002d01000029030146cbafcad15f26ee9c399c30942cb9a40c438dfa3f0aeb13b9b68e7fd7fa6e64000002000a0100 > NAS-Port-Type = Wireless-802.11 > NAS-Port = 322 > State = 0x0aacb6009ffcc2e6b40b7487d9b49dce > NAS-IP-Address = 10.10.7.203 > NAS-Identifier = "testbaum" > Processing the authorize section of radiusd.conf > modcall: entering group authorize for request 1 > modcall[authorize]: module "preprocess" returns ok for request 1 > modcall[authorize]: module "chap" returns noop for request 1 > modcall[authorize]: module "mschap" returns noop for request 1 > rlm_realm: No '@' in User-Name = "tkiziloren", skipping NULL due to > config. > modcall[authorize]: module "suffix" returns noop for request 1 > rlm_eap: EAP packet type response id 3 length 60 > rlm_eap: No EAP Start, assuming it's an on-going EAP conversation > modcall[authorize]: module "eap" returns updated for request 1 > users: Matched entry DEFAULT at line 29 > modcall[authorize]: module "files" returns ok for request 1 > rlm_ldap: - authorize > rlm_ldap: performing user authorization for tkiziloren > radius_xlat: '(uid=tkiziloren)' > radius_xlat: 'ou=people,dc=anadolu,dc=edu,dc=tr' > rlm_ldap: ldap_get_conn: Checking Id: 0 > rlm_ldap: ldap_get_conn: Got Id: 0 > rlm_ldap: performing search in ou=people,dc=anadolu,dc=edu,dc=tr, with > filter (uid=tkiziloren) > rlm_ldap: looking for check items in directory... > rlm_ldap: looking for reply items in directory... > rlm_ldap: user tkiziloren authorized to use remote access > rlm_ldap: ldap_release_conn: Release Id: 0 > modcall[authorize]: module "ldap_1x" returns ok for request 1 > modcall: leaving group authorize (returns updated) for request 1 > rad_check_password: Found Auth-Type EAP > auth: type "EAP" > Processing the authenticate section of radiusd.conf > modcall: entering group authenticate for request 1 > rlm_eap: Request found, released from the list > rlm_eap: EAP/ttls > rlm_eap: processing type ttls > rlm_eap_ttls: Authenticate > rlm_eap_tls: processing TLS > rlm_eap_tls: Length Included > eaptls_verify returned 11 > (other): before/accept initialization > TLS_accept: before/accept initialization > rlm_eap_tls: <<< TLS 1.0 Handshake [length 002d], ClientHello > TLS_accept: SSLv3 read client hello A > rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello > TLS_accept: SSLv3 write server hello A > rlm_eap_tls: >>> TLS 1.0 Handshake [length 05e7], Certificate > TLS_accept: SSLv3 write certificate A > rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone > TLS_accept: SSLv3 write server done A > TLS_accept: SSLv3 flush data > TLS_accept:error in SSLv3 read client certificate A > In SSL Handshake Phase > In SSL Accept mode > eaptls_process returned 13 > modcall[authenticate]: module "eap" returns handled for request 1 > modcall: leaving group authenticate (returns handled) for request 1 > Sending Access-Challenge of id 147 to 10.10.7.203 port 1645 > EAP-Message = > 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 > EAP-Message = > 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 > EAP-Message = > 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 > EAP-Message = > 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 > EAP-Message = 0x3130303530373130333734345a30818f310b30090603 > Message-Authenticator = 0x00000000000000000000000000000000 > State = 0x2c09c8f35ddc35ecd609188a17165621 > Finished request 1 > Going to the next request > Waking up in 6 seconds... > rad_recv: Access-Request packet from host 10.10.7.203:1645, id=148, > length=148 > User-Name = "tkiziloren" > Framed-MTU = 1400 > Called-Station-Id = "0017.0e85.f190" > Calling-Station-Id = "0011.2fb9.d08b" > Service-Type = Login-User > Message-Authenticator = 0x9b4e281f16c2c5d3cf691e6e195bea68 > EAP-Message = 0x020400061500 > NAS-Port-Type = Wireless-802.11 > NAS-Port = 322 > State = 0x2c09c8f35ddc35ecd609188a17165621 > NAS-IP-Address = 10.10.7.203 > NAS-Identifier = "testbaum" > Processing the authorize section of radiusd.conf > modcall: entering group authorize for request 2 > modcall[authorize]: module "preprocess" returns ok for request 2 > modcall[authorize]: module "chap" returns noop for request 2 > modcall[authorize]: module "mschap" returns noop for request 2 > rlm_realm: No '@' in User-Name = "tkiziloren", skipping NULL due to > config. > modcall[authorize]: module "suffix" returns noop for request 2 > rlm_eap: EAP packet type response id 4 length 6 > rlm_eap: No EAP Start, assuming it's an on-going EAP conversation > modcall[authorize]: module "eap" returns updated for request 2 > users: Matched entry DEFAULT at line 29 > modcall[authorize]: module "files" returns ok for request 2 > rlm_ldap: - authorize > rlm_ldap: performing user authorization for tkiziloren > radius_xlat: '(uid=tkiziloren)' > radius_xlat: 'ou=people,dc=anadolu,dc=edu,dc=tr' > rlm_ldap: ldap_get_conn: Checking Id: 0 > rlm_ldap: ldap_get_conn: Got Id: 0 > rlm_ldap: performing search in ou=people,dc=anadolu,dc=edu,dc=tr, with > filter (uid=tkiziloren) > rlm_ldap: looking for check items in directory... > rlm_ldap: looking for reply items in directory... > rlm_ldap: user tkiziloren authorized to use remote access > rlm_ldap: ldap_release_conn: Release Id: 0 > modcall[authorize]: module "ldap_1x" returns ok for request 2 > modcall: leaving group authorize (returns updated) for request 2 > rad_check_password: Found Auth-Type EAP > auth: type "EAP" > Processing the authenticate section of radiusd.conf > modcall: entering group authenticate for request 2 > rlm_eap: Request found, released from the list > rlm_eap: EAP/ttls > rlm_eap: processing type ttls > rlm_eap_ttls: Authenticate > rlm_eap_tls: processing TLS > rlm_eap_tls: Received EAP-TLS ACK message > rlm_eap_tls: ack handshake fragment handler > eaptls_verify returned 1 > eaptls_process returned 13 > modcall[authenticate]: module "eap" returns handled for request 2 > modcall: leaving group authenticate (returns handled) for request 2 > Sending Access-Challenge of id 148 to 10.10.7.203 port 1645 > EAP-Message = > 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 > EAP-Message = > 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 > EAP-Message = > 0x4b77db5093871b2203bf2271cb97b98cc169c03f4f67d7a01261d971dfddc176cce3a42e1dd1e37037060a528db7e8481722e222549b882a93cfa582a29df0f1b401a28e197772410a1f1016030100040e000000 > Message-Authenticator = 0x00000000000000000000000000000000 > State = 0xb63cf9e5375c651683e69b8c2d8543fc > Finished request 2 > Going to the next request > Waking up in 6 seconds... > --- Walking the entire request list --- > Cleaning up request 0 ID 146 with timestamp 4642d682 > Cleaning up request 1 ID 147 with timestamp 4642d682 > Cleaning up request 2 ID 148 with timestamp 4642d682 > Nothing to do. Sleeping until we see a request. > > > > > A.L.M.Buxey wrote: > >> Hi, >> >> >>> However when i try to perform same task by using securew2 on XP client, >>> it >>> always shows "attempting to authenticate", >>> >> did you configure SecureW2 to allow new connections? >> >> alan >> - >> List info/subscribe/unsubscribe? See >> http://www.freeradius.org/list/users.html >> >> >> > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html