Can you debug radius on the switch? It should have some kind of a log. Ivan Kalik Kalik Informatika ISP
Dana 29/6/2007, "Darren Maden" <[EMAIL PROTECTED]> piše: > > > > Does the switch have the IP address of the server? > > > >Yes, the switch is setup in the same way as my wireless routers (which >work) and no errors are detected when I start radiusd in debug >mode...although if the switch isn't seeing the server then there >probably wouldn't be any errors, I'm quite confident that these settings >are right though, there isn't really a lot involved. > > > > As was said before, the problem is likely between the switch and the > > RADIUS server. Looking at the traffic between the switch and > > supplicant probably won't help you debug issues between the switch and > > the RADIUS server. > >Nothing is going out to the RADIUS server from the switch, it's on the >same VLAN and other traffic can get through. Other than some timing and >amount of retry options the only options on the switch are RADIUS Server >IP, ports, secret and name for the switch as well as the per-port options. > >But why is the supplicant receiving "success" packets? Could the switch >be trying to authenticate it itself in some way? > > > >~Darren Maden >- >List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html