Hi all, I'm setting up module fail-over for mysql backend following the guide from the wiki, but something goes wrong. I included two sql.conf (mysql1.conf and mysql2.conf) in the "modules" section and radiusd -X reports the two files are included, but I only see the parameters from the first file get loaded and everything stops with "bus error" when trying to connect to the server.
I checked name resolution, mysql user/password, network reachability and everything it's ok. I also set a tcpdump session on mysql1 but no packets for mysql are coming in. Then I straced radiusd execution and I noticed it fails after reading /etc/hosts (?!?). Here's the relevant output from radiusd -X: Module: Loaded SQL sql: driver = "rlm_sql_mysql" sql: server = "mysql1.satcom.it" sql: port = "3306" sql: login = "radius" sql: password = "radius" sql: radius_db = "radius" sql: nas_table = "nas" sql: sqltrace = no sql: sqltracefile = "/var/log/freeradius/sqltrace.sql" sql: readclients = no sql: deletestalesessions = yes sql: num_sql_socks = 100 sql: sql_user_name = "%{User-Name}" sql: default_user_profile = "" sql: query_on_not_found = no sql: authorize_check_query = "SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id" sql: authorize_reply_query = "SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id" sql: authorize_group_check_query = "SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = '%{SQL-User-Name}' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id" sql: authorize_group_reply_query = "SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE usergroup.Username = '%{SQL-User-Name}' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id" sql: accounting_onoff_query = "UPDATE radacct SET AcctStopTime='%S', AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime), AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time}' WHERE AcctSessionTime=0 AND AcctStopTime=0 AND NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'" sql: accounting_update_query = "UPDATE radacct ? SET FramedIPAddress = '%{Framed-IP-Address}', ? AcctSessionTime = '%{Acct-Session-Time}', ? AcctInputOctets = '%{Acct-Input-Octets}', ? AcctOutputOctets = '%{Acct-Output-Octets}' ? WHERE AcctSessionId = '%{Acct-Session-Id}' ? AND UserName = '%{SQL-User-Name}' ? AND NASIPAddress= '%{NAS-IP-Address}'" sql: accounting_update_query_alt = "INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S',INTERVAL (%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0}) SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0')" sql: accounting_start_query = "INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', '0', '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Acct-Delay-Time}', '0')" sql: accounting_start_query_alt = "UPDATE radacct SET AcctStartTime = '%S', AcctStartDelay = '%{Acct-Delay-Time}', ConnectInfo_start = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'" sql: accounting_stop_query = "UPDATE radacct SET AcctStopTime = '%S', AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets = '%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}', AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time}', ConnectInfo_stop = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'" sql: accounting_stop_query_alt = "INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0}) SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{Acct-Delay-Time}')" sql: group_membership_query = "SELECT GroupName FROM usergroup WHERE UserName='%{SQL-User-Name}'" sql: connect_failure_retry_delay = 60 sql: simul_count_query = "" sql: simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName, NASIPAddress, NASPortId, FramedIPAddress, CallingStationId, FramedProtocol FROM radacct WHERE UserName='%{SQL-User-Name}' AND AcctStopTime = 0" sql: postauth_query = "INSERT into radpostauth (id, user, pass, reply, date) values ('', '%{User-Name}', '%{User-Password:-Chap-Password}', '%{reply:Packet-Type}', NOW())" sql: safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" rlm_sql (mysql1): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked rlm_sql (mysql1): Attempting to connect to [EMAIL PROTECTED]:3306/radius rlm_sql (mysql1): starting 0 rlm_sql (mysql1): Attempting to connect rlm_sql_mysql #0 rlm_sql_mysql: Starting connect to MySQL server for #0 Bus error Here's the relevant output from strace radiusd -X : write(1, "rlm_sql (mysql1): starting 0\n", 29rlm_sql (mysql1): starting 0 ) = 29 time(NULL) = 1183449009 time(NULL) = 1183449009 write(1, "rlm_sql (mysql1): Attempting to "..., 57rlm_sql (mysql1): Attempting to connect rlm_sql_mysql #0 ) = 57 time(NULL) = 1183449009 write(1, "rlm_sql_mysql: Starting connect "..., 55rlm_sql_mysql: Starting connect to MySQL server for #0 ) = 55 open("/etc/services", O_RDONLY) = 5 fcntl64(5, F_GETFD) = 0 fcntl64(5, F_SETFD, FD_CLOEXEC) = 0 fstat64(5, {st_mode=S_IFREG|0644, st_size=18274, ...}) = 0 mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xf7a6a000 read(5, "# Network services, Internet sty"..., 8192) = 8192 read(5, "otus Note\nlotusnote\t1352/udp\tlot"..., 8192) = 8192 close(5) = 0 munmap(0xf7a6a000, 8192) = 0 rt_sigaction(SIGPIPE, {SIG_IGN}, {SIG_DFL}, 0xf7b188f8, 4294967295) = 0 stat64("/etc/mysql/my.cnf", {st_mode=S_IFREG|0644, st_size=3636, ...}) = 0 open("/etc/mysql/my.cnf", O_RDONLY|O_LARGEFILE) = 5 fstat64(5, {st_mode=S_IFREG|0644, st_size=3636, ...}) = 0 mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xf7a6a000 read(5, "#\n# The MySQL database server co"..., 8192) = 3636 open("/etc/mysql/conf.d/", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY|0x4) = 6 fstat64(6, {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 fcntl64(6, F_SETFD, FD_CLOEXEC) = 0 getdents64(6, /* 2 entries */, 8192) = 48 getdents64(6, /* 0 entries */, 8192) = 0 close(6) = 0 read(5, "", 8192) = 0 close(5) = 0 munmap(0xf7a6a000, 8192) = 0 stat64("/root/.my.cnf", 0xffc8c908) = -1 ENOENT (No such file or directory) stat64("/usr/etc/my.cnf", 0xffc8c908) = -1 ENOENT (No such file or directory) socket(PF_INET, SOCK_STREAM, IPPROTO_IP) = 5 fcntl64(5, F_SETFL, O_RDONLY) = 0 fcntl64(5, F_GETFL) = 0x2 (flags O_RDWR) open("/etc/hosts", O_RDONLY) = 6 fcntl64(6, F_GETFD) = 0 fcntl64(6, F_SETFD, FD_CLOEXEC) = 0 fstat64(6, {st_mode=S_IFREG|0644, st_size=392, ...}) = 0 mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xf7a6a000 read(6, "127.0.0.1\tlocalhost\n10.3.0.170\tr"..., 8192) = 392 --- SIGBUS (Bus error) @ 0 (0) --- +++ killed by SIGBUS +++ Any hints? Thanks in advance, Francesco Cristofori. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html