Ok, What I'm trying to do is have FreeRadius perform its AAA functions again a PERL based backend, which reads the user information from a proprietary system - via a TCP interface.
The authorization section and the authenticate section both have PERL enabled in them. (I removed the remarks for easier reading) - the first digest is commented, but right after perl there is another one. ---------- SNIP ------------ authorize { preprocess auth_log # attr_filter # chap # mschap # digest # IPASS # suffix # ntdomain # eap # files digest perl # sql # etc_smbpasswd # ldap # daily # checkval # pap } --------------------------- You are correct in regards to the authentication section (see below), I missed that one: --------- SNIP ------------ authenticate { # Auth-Type PAP { # # pap # # } # Auth-Type CHAP { # # chap # # } # Auth-Type MS-CHAP { # # mschap # # } # digest # pam unix # Auth-Type LDAP { # # ldap # # } # eap perl } --------------------------- I may be going about it all wrong, which I'm not ruling out. If you have something specific to point me at, please do. Regards, Z2L ----- Original Message ----- From: "A L M Buxey" <[EMAIL PROTECTED]> To: [EMAIL PROTECTED], "FreeRadius users mailing list" <freeradius-users@lists.freeradius.org> Sent: Wednesday, July 25, 2007 2:12:55 PM (GMT+0200) Asia/Jerusalem Subject: Re: rml_perl question Hi, you dont have perl enabled in the authorise section of your config...you dont have digest enabled in your authorise or authenticate sections either. what are you trying to acheive? alan - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html