I am attempting to build a setup which authenticates users from 3 realms in one MySQL database. Some of my users, actually a large proportion of them, are currently not using their realm to authenticate. I am about to merge the dial pools so I won't be able to use huntgroups or hints to figure out which realm they are coming from.
I am trying to use the new unlang option to avoid writing an rlm_perl type script. FreeRADIUS-snapshot-20070813 I don't know if any of this is "legal". I'm using one sql module. I just call it once for each realm after changing the %{User-Name} to append that realm. It just looked like it might work so I tried it. The debug output makes it look like I am very close. I haven't been able to figure out exactly what is wrong with it, yet. The failure happens in rlm_pap when the user does not specify a realm. I don't see the cause of the failure in the debug output. I'm probably not interpreting the output correctly. Here are the diffs to the default config coming from the snapshot. -------------------------------------------------------------------- --- radiusd.conf-orig Mon Aug 13 20:42:25 2007 +++ radiusd.conf Mon Aug 13 21:15:41 2007 @@ -210,7 +210,7 @@ # Allowed values are: # integer port number (1812) # 0 means "use /etc/services for the proper port" - port = 0 + port = 1645 # Type of packets to listen for. # Allowed values are: @@ -252,7 +252,7 @@ listen { ipaddr = * # ipv6addr = :: - port = 0 + port = 1646 type = acct # interface = eth0 # clients = per_socket_clients @@ -1051,7 +1051,7 @@ # # If you're not running a Cisco or Quintum NAS, you don't # need this hack. - with_cisco_vsa_hack = no + with_cisco_vsa_hack = yes } # Livingston-style 'users' file @@ -1214,33 +1214,33 @@ # # See rlm_sql_log(5) manpage. # -# sql_log { -# path = ${radacctdir}/sql-relay -# acct_table = "radacct" -# postauth_table = "radpostauth" -# -# Start = "INSERT INTO ${acct_table} (AcctSessionId, UserName, \ -# NASIPAddress, FramedIPAddress, AcctStartTime, AcctStopTime, \ -# AcctSessionTime, AcctTerminateCause) VALUES \ -# ('%{Acct-Session-Id}', '%{User-Name}', '%{NAS-IP-Address}', \ -# '%{Framed-IP-Address}', '%S', '0', '0', '');" -# Stop = "INSERT INTO ${acct_table} (AcctSessionId, UserName, \ -# NASIPAddress, FramedIPAddress, AcctStartTime, AcctStopTime, \ -# AcctSessionTime, AcctTerminateCause) VALUES \ -# ('%{Acct-Session-Id}', '%{User-Name}', '%{NAS-IP-Address}', \ -# '%{Framed-IP-Address}', '0', '%S', '%{Acct-Session-Time}', \ -# '%{Acct-Terminate-Cause}');" -# Alive = "INSERT INTO ${acct_table} (AcctSessionId, UserName, \ -# NASIPAddress, FramedIPAddress, AcctStartTime, AcctStopTime, \ -# AcctSessionTime, AcctTerminateCause) VALUES \ -# ('%{Acct-Session-Id}', '%{User-Name}', '%{NAS-IP-Address}', \ -# '%{Framed-IP-Address}', '0', '0', '%{Acct-Session-Time}','');" -# -# Post-Auth = "INSERT INTO ${postauth_table} \ -# (user, pass, reply, date) VALUES \ -# ('%{User-Name}', '%{User-Password:-Chap-Password}', \ -# '%{reply:Packet-Type}', '%S');" -# } + sql_log { + path = ${radacctdir}/sql-relay + acct_table = "radacct" + postauth_table = "radpostauth" + + Start = "INSERT INTO ${acct_table} (AcctSessionId, UserName, \ + NASIPAddress, FramedIPAddress, AcctStartTime, AcctStopTime, \ + AcctSessionTime, AcctTerminateCause) VALUES \ + ('%{Acct-Session-Id}', '%{User-Name}', '%{NAS-IP-Address}', \ + '%{Framed-IP-Address}', '%S', '0', '0', '');" + Stop = "INSERT INTO ${acct_table} (AcctSessionId, UserName, \ + NASIPAddress, FramedIPAddress, AcctStartTime, AcctStopTime, \ + AcctSessionTime, AcctTerminateCause) VALUES \ + ('%{Acct-Session-Id}', '%{User-Name}', '%{NAS-IP-Address}', \ + '%{Framed-IP-Address}', '0', '%S', '%{Acct-Session-Time}', \ + '%{Acct-Terminate-Cause}');" + Alive = "INSERT INTO ${acct_table} (AcctSessionId, UserName, \ + NASIPAddress, FramedIPAddress, AcctStartTime, AcctStopTime, \ + AcctSessionTime, AcctTerminateCause) VALUES \ + ('%{Acct-Session-Id}', '%{User-Name}', '%{NAS-IP-Address}', \ + '%{Framed-IP-Address}', '0', '0', '%{Acct-Session-Time}','');" + + Post-Auth = "INSERT INTO ${postauth_table} \ + (user, pass, reply, date) VALUES \ + ('%{User-Name}', '%{User-Password:-Chap-Password}', \ + '%{reply:Packet-Type}', '%S');" + } # # Create a unique accounting session Id. Many NASes re-use --- default-orig Mon Aug 13 21:00:10 2007 +++ default Tue Aug 14 03:30:23 2007 @@ -122,7 +122,56 @@ # is meant to mirror the "users" file. # # See "Authorization Queries" in sql.conf -# sql + if ( "%{User-Name}" =~ /@/) { + sql + } + else { + update request { + Stripped-User-Name := "%{User-Name}" + User-Name := "[EMAIL PROTECTED]" + } + sql { + fail = 1 + notfound = 2 + noop = return + ok = return + updated = return + reject = return + userlock = return + invalid = return + handled = return + } + update request { + User-Name := "[EMAIL PROTECTED]" + } + sql { + fail = 1 + notfound = 2 + noop = return + ok = return + updated = return + reject = return + userlock = return + invalid = return + handled = return + } + update request { + User-Name := "[EMAIL PROTECTED]" + } + sql { + fail = 1 + notfound = 2 + noop = return + ok = return + updated = return + reject = return + userlock = return + invalid = return + handled = return + } + } + + # # If you are using /etc/smbpasswd, and are also doing @@ -312,7 +361,7 @@ # Log traffic to an SQL database. # # See "Accounting queries" in sql.conf -# sql + sql # # Instead of sending the query to the SQL server, @@ -339,11 +388,11 @@ # or rlm_sql module can handle this. # The rlm_sql module is *much* faster session { - radutmp +# radutmp # # See "Simultaneous Use Checking Queries" in sql.conf -# sql + sql } @@ -364,7 +413,7 @@ # After authenticating the user, do another SQL query. # # See "Authentication Logging Queries" in sql.conf -# sql + sql # # Instead of sending the query to the SQL server, -------------------------------------------------------------------- Here are the authentication tests. [EMAIL PROTECTED] ~ 22:30:33 Mon Aug 13 $ radtest [EMAIL PROTECTED] password1 radtest.example1.net 2 blahblah 2 Sending Access-Request of id 82 to radtest.example1.net port 1645 User-Name = "[EMAIL PROTECTED]" User-Password = "password1" NAS-IP-Address = 255.255.255.255 NAS-Port = 2 Framed-Protocol = PPP rad_recv: Access-Accept packet from host radtest.example1.net:1645, id=82, length=32 Framed-Protocol = PPP Framed-Compression = Van-Jacobson-TCP-IP [EMAIL PROTECTED] ~ 22:33:43 Mon Aug 13 $ radtest lambert password1 radtest.example1.net 2 blahblah 2 Sending Access-Request of id 99 to radtest.example1.net port 1645 User-Name = "lambert" User-Password = "password1" NAS-IP-Address = 255.255.255.255 NAS-Port = 2 Framed-Protocol = PPP rad_recv: Access-Reject packet from host radtest.example1.net:1645, id=99, length=20 -------------------------------------------------------------------- And here is the output from "/usr/local/sbin/radiusd -X": Script started on Tue Aug 14 03:33:25 2007 [EMAIL PROTECTED] /usr/local/etc/raddb 03:33:25 Tue Aug 14 # /usr/local/sbin/radiusd -X FreeRADIUS Version 2.0.0-pre2, for host i386-unknown-freebsd6.2, built on Aug 13 2007 at 19:41:31 Copyright (C) 2000-2007 The FreeRADIUS server project. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License. Config: including file: /usr/local/etc/raddb/radiusd.conf Config: including file: /usr/local/etc/raddb/proxy.conf Config: including file: /usr/local/etc/raddb/clients.conf Config: including file: /usr/local/etc/raddb/snmp.conf Config: including file: /usr/local/etc/raddb/eap.conf Config: including file: /usr/local/etc/raddb/sql.conf Config: including file: /usr/local/etc/raddb/sql/mysql/dialup.conf Config: including file: /usr/local/etc/raddb/sql/mysql/counter.conf Config: including files in directory: /usr/local/etc/raddb/sites-enabled/ Config: including file: /usr/local/etc/raddb/sites-enabled/default Starting - reading configuration files ... read_config_files: reading dictionary main { prefix = "/usr/local" localstatedir = "/usr/local/var" logdir = "/usr/local/var/log/radius" libdir = "/usr/local/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no snmp = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no log_stripped_names = no log_file = "/usr/local/var/log/radius/radius.log" log_auth = no log_auth_badpass = no log_auth_goodpass = no pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = yes log { syslog_facility = "daemon" } proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } home_server localhost { ipaddr = 127.0.0.1 IP address [127.0.0.1] port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_check = "none" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 } server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } listen { type = "auth" ipaddr = * port = 1645 client 127.0.0.1 { secret = "testing123" shortname = "localhost" nastype = "other" } } listen { type = "acct" ipaddr = * port = 1646 } radiusd: entering modules setup radiusd: Library search path is /usr/local/lib instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = yes input_pairs = "request" shell_escape = yes } rlm_exec: wait=yes but no output defined. Did you mean output=none? Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } server { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no } eap: Linked to sub-module rlm_eap_md5 eap: Instantiating eap-md5 eap: Linked to sub-module rlm_eap_leap eap: Instantiating eap-leap eap: Linked to sub-module rlm_eap_gtc eap: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } eap: Linked to sub-module rlm_eap_tls eap: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/usr/local/etc/raddb/certs/server.pem" certificate_file = "/usr/local/etc/raddb/certs/server.pem" CA_file = "/usr/local/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/usr/local/etc/raddb/certs/dh" random_file = "/usr/local/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/usr/local/etc/raddb/certs/bootstrap" } rlm_eap_tls: Loading the certificate file as a chain eap: Linked to sub-module rlm_eap_ttls eap: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no } eap: Linked to sub-module rlm_eap_peap eap: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes } eap: Linked to sub-module rlm_eap_mschapv2 eap: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/usr/local/etc/raddb/huntgroups" hints = "/usr/local/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = yes with_alvarion_vsa_hack = no } Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/usr/local/etc/raddb/users" acctusersfile = "/usr/local/etc/raddb/acct_users" preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" compat = "no" } Module: Linked to module rlm_sql Module: Instantiating sql sql { driver = "rlm_sql_mysql" server = "localhost" port = "" login = "radius" password = "kic7ops83" radius_db = "radius" read_groups = yes sqltrace = no sqltracefile = "/usr/local/var/log/radius/sqltrace.sql" readclients = yes deletestalesessions = yes num_sql_socks = 5 sql_user_name = "%{User-Name}" default_user_profile = "" nas_query = "SELECT id, nasname, shortname, type, secret FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id" accounting_onoff_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = unix_timestamp('%S') - unix_timestamp(acctstarttime), acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = %{%{Acct-Delay-Time}:-0} WHERE acctsessiontime = 0 AND acctstoptime = 0 AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= '%S'" accounting_update_query = " UPDATE radacct SET framedipaddress = '%{Framed-IP-Address}', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_update_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctsessiontime, acctauthentic, connectinfo_start, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, servicetype, framedprotocol, framedipaddress, acctstartdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{%{Acct-Input-Gigawo! rds}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', '0', '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Fra! med-Protocol}', '%{Framed-IP-Address}', '%{%{Acct-Delay-Time}:-0}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query_alt = " UPDATE radacct SET acctstarttime = '%S', acctstartdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_start = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_stop_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_stop = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_stop_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{%{Acct-Input-Gi! gawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{%{Acct-Delay-Time}:-0}')" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" connect_failure_retry_delay = 60 simul_count_query = "" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime = 0" postauth_query = "INSERT INTO radpostauth (user, pass, reply, date) VALUES ( '%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked rlm_sql (sql): Attempting to connect to [EMAIL PROTECTED]:/radius rlm_sql (sql): starting 0 rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 rlm_sql_mysql: Starting connect to MySQL server for #0 rlm_sql (sql): Connected new DB handle, #0 rlm_sql (sql): starting 1 rlm_sql (sql): Attempting to connect rlm_sql_mysql #1 rlm_sql_mysql: Starting connect to MySQL server for #1 rlm_sql (sql): Connected new DB handle, #1 rlm_sql (sql): starting 2 rlm_sql (sql): Attempting to connect rlm_sql_mysql #2 rlm_sql_mysql: Starting connect to MySQL server for #2 rlm_sql (sql): Connected new DB handle, #2 rlm_sql (sql): starting 3 rlm_sql (sql): Attempting to connect rlm_sql_mysql #3 rlm_sql_mysql: Starting connect to MySQL server for #3 rlm_sql (sql): Connected new DB handle, #3 rlm_sql (sql): starting 4 rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 rlm_sql_mysql: Starting connect to MySQL server for #4 rlm_sql (sql): Connected new DB handle, #4 rlm_sql (sql): Processing generate_sql_clients rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret FROM nas rlm_sql (sql): Reserving sql socket id: 4 rlm_sql (sql): Read entry nasname=sysmon.example1.net,shortname=sysmon,secret=blahblah rlm_sql (sql): Adding client xx.xy.yz.w (sysmon) to clients list rlm_sql (sql): Released sql socket id: 4 Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating detail detail { detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/usr/local/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/usr/local/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } } Initializing the thread pool... Listening on authentication address * port 1645 Listening on accounting address * port 1646 Listening on proxy address * port 1647 Ready to process requests. Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host xx.xy.yz.w port 1131, id=82, length=75 User-Name = "[EMAIL PROTECTED]" User-Password = "password1" NAS-IP-Address = 255.255.255.255 NAS-Port = 2 Framed-Protocol = PPP +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound rlm_realm: Looking up realm "example3.net" for User-Name = "[EMAIL PROTECTED]" rlm_realm: No such realm "example3.net" ++[suffix] returns noop rlm_eap: No EAP-Message, not doing EAP ++[eap] returns noop users: Matched entry DEFAULT at line 172 ++[files] returns ok ++? if ("%{User-Name}" =~ /@/) expand: %{User-Name} -> [EMAIL PROTECTED] ? Evaluating ("%{User-Name}" =~ /@/) -> TRUE ++? if ("%{User-Name}" =~ /@/) -> TRUE ++- entering if ("%{User-Name}" =~ /@/) expand: %{User-Name} -> [EMAIL PROTECTED] rlm_sql (sql): sql_set_user escaped user --> '[EMAIL PROTECTED]' rlm_sql (sql): Reserving sql socket id: 3 expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = '[EMAIL PROTECTED]' ORDER BY id rlm_sql (sql): User found in radcheck table expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = '[EMAIL PROTECTED]' ORDER BY id expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = '[EMAIL PROTECTED]' ORDER BY priority expand: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'dialup' ORDER BY id rlm_sql (sql): User found in group dialup expand: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'dialup' ORDER BY id rlm_sql (sql): Released sql socket id: 3 +++[sql] returns ok ++- if ("%{User-Name}" =~ /@/) returns ok ++ ... skipping else for request 0: Preceding "if" was taken ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns updated rad_check_password: Found Auth-Type auth: type "PAP" +- entering group PAP rlm_pap: login attempt with password password1 rlm_pap: Using clear text password. rlm_pap: User authenticated successfully ++[pap] returns ok +- entering group post-auth rlm_sql (sql): Processing sql_postauth expand: %{User-Name} -> [EMAIL PROTECTED] rlm_sql (sql): sql_set_user escaped user --> '[EMAIL PROTECTED]' expand: %{User-Password} -> password1 expand: INSERT INTO radpostauth (user, pass, reply, date) VALUES ( '%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') -> INSERT INTO radpostauth (user, pass, reply, date) VALUES ( '[EMAIL PROTECTED]', 'password1', 'Access-Accept', '2007-08-14 03:33:43') rlm_sql (sql) in sql_postauth: query is INSERT INTO radpostauth (user, pass, reply, date) VALUES ( '[EMAIL PROTECTED]', 'password1', 'Access-Accept', '2007-08-14 03:33:43') rlm_sql (sql): Reserving sql socket id: 2 rlm_sql (sql): Released sql socket id: 2 ++[sql] returns ok Sending Access-Accept of id 82 to xx.xy.yz.w port 1131 Framed-Protocol = PPP Framed-Compression = Van-Jacobson-TCP-IP Finished request 0 state 5 Going to the next request Waking up in 4 seconds... Cleaning up request 0 ID 82 with timestamp +15 Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host xx.xy.yz.w port 3307, id=99, length=65 User-Name = "lambert" User-Password = "password1" NAS-IP-Address = 255.255.255.255 NAS-Port = 2 Framed-Protocol = PPP +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[unix] returns updated rlm_realm: No '@' in User-Name = "lambert", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: No EAP-Message, not doing EAP ++[eap] returns noop users: Matched entry DEFAULT at line 172 ++[files] returns ok ++? if ("%{User-Name}" =~ /@/) expand: %{User-Name} -> lambert ? Evaluating ("%{User-Name}" =~ /@/) -> FALSE ++? if ("%{User-Name}" =~ /@/) -> FALSE ++- entering else expand: %{User-Name} -> lambert expand: [EMAIL PROTECTED] -> [EMAIL PROTECTED] +++[request] returns ok expand: %{User-Name} -> [EMAIL PROTECTED] rlm_sql (sql): sql_set_user escaped user --> '[EMAIL PROTECTED]' rlm_sql (sql): Reserving sql socket id: 1 expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = '[EMAIL PROTECTED]' ORDER BY id expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = '[EMAIL PROTECTED]' ORDER BY priority rlm_sql (sql): Released sql socket id: 1 rlm_sql (sql): User [EMAIL PROTECTED] not found +++[sql] returns notfound expand: [EMAIL PROTECTED] -> [EMAIL PROTECTED] +++[request] returns notfound expand: %{User-Name} -> [EMAIL PROTECTED] rlm_sql (sql): sql_set_user escaped user --> '[EMAIL PROTECTED]' rlm_sql (sql): Reserving sql socket id: 0 expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = '[EMAIL PROTECTED]' ORDER BY id expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = '[EMAIL PROTECTED]' ORDER BY priority rlm_sql (sql): Released sql socket id: 0 rlm_sql (sql): User [EMAIL PROTECTED] not found +++[sql] returns notfound expand: [EMAIL PROTECTED] -> [EMAIL PROTECTED] +++[request] returns notfound expand: %{User-Name} -> [EMAIL PROTECTED] rlm_sql (sql): sql_set_user escaped user --> '[EMAIL PROTECTED]' rlm_sql (sql): Reserving sql socket id: 4 expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = '[EMAIL PROTECTED]' ORDER BY id rlm_sql (sql): User found in radcheck table expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = '[EMAIL PROTECTED]' ORDER BY id expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = '[EMAIL PROTECTED]' ORDER BY priority expand: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'dialup' ORDER BY id rlm_sql (sql): User found in group dialup expand: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'dialup' ORDER BY id rlm_sql (sql): Released sql socket id: 4 +++[sql] returns ok ++- else returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns updated rad_check_password: Found Auth-Type auth: type "PAP" +- entering group PAP rlm_pap: login attempt with password password1 rlm_pap: Using CRYPT encryption. rlm_pap: Passwords don't match ++[pap] returns reject auth: Failed to validate the user. Found Post-Auth-Type Reject +- entering group REJECT expand: %{User-Name} -> [EMAIL PROTECTED] attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 1 for 1 seconds Going to the next request Sending delayed reject for request 1 Sending Access-Reject of id 99 to xx.xy.yz.w port 3307 Waking up in 4 seconds... Cleaning up request 1 ID 99 with timestamp +27 Nothing to do. Sleeping until we see a request. [EMAIL PROTECTED] /usr/local/etc/raddb 03:38:22 Tue Aug 14 # exit exit Script done on Tue Aug 14 03:38:25 2007 -- Scott Lambert KC5MLE Unix SysAdmin [EMAIL PROTECTED] - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html