On Tue, Aug 14, 2007 at 01:24:15AM -0500, Scott Lambert wrote: > On Mon, Aug 13, 2007 at 11:48:06PM -0500, Scott Lambert wrote: > > The failure happens in rlm_pap when the user does not specify a realm. > > I don't see the cause of the failure in the debug output. I'm probably > > not interpreting the output correctly. <snip> > > Here are the authentication tests. > > > > [EMAIL PROTECTED] ~ > > 22:30:33 Mon Aug 13 $ radtest [EMAIL PROTECTED] password1 > > radtest.example1.net 2 blahblah 2 > > Sending Access-Request of id 82 to radtest.example1.net port 1645 > > User-Name = "[EMAIL PROTECTED]" > > User-Password = "password1" > > NAS-IP-Address = 255.255.255.255 > > NAS-Port = 2 > > Framed-Protocol = PPP > > rad_recv: Access-Accept packet from host radtest.example1.net:1645, id=82, > > length=32 > > Framed-Protocol = PPP > > Framed-Compression = Van-Jacobson-TCP-IP > > > > [EMAIL PROTECTED] ~ > > 22:33:43 Mon Aug 13 $ radtest lambert password1 radtest.example1.net 2 > > blahblah 2 > > Sending Access-Request of id 99 to radtest.example1.net port 1645 > > User-Name = "lambert" > > User-Password = "password1" > > NAS-IP-Address = 255.255.255.255 > > NAS-Port = 2 > > Framed-Protocol = PPP > > rad_recv: Access-Reject packet from host radtest.example1.net:1645, id=99, > > length=20
One of they guys at work suggested that it might be because I have an account on the machine. He was right. I disabled the unix module in the authentication section now all users work correctly. This unlang stuff is great! -- Scott Lambert KC5MLE Unix SysAdmin [EMAIL PROTECTED] - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html