You are correct.. the way is the configurations of the VLANs. I´ll see the switchs documentation ..
Tnks boys. []´s Sérgio. ====================== 2007/9/5, Arran Cudbard-Bell <[EMAIL PROTECTED]>: > Sérgio Kojima wrote: > > Hi Josh, > > > > The printers/802.1x are OK! > > But the problem is the printers that not support 802.1x, like Kyocera > > KM-2050. > > Anyway? > > > > > > > > 2007/9/5, Josh Howlett <[EMAIL PROTECTED]>: > > > >> Do your printers support 802.1x? > >> > >> josh. > >> > >> > >>> -----Original Message----- > >>> From: [EMAIL PROTECTED] > >>> [mailto:[EMAIL PROTECTED] On > >>> Behalf Of Sérgio Kojima > >>> Sent: 05 September 2007 18:58 > >>> To: freeradius-users@lists.freeradius.org > >>> Subject: Network Printers with freeradius? Anyway? > >>> > >>> Hello all. > >>> > >>> Finaly my FreeRADIUS 2.0.0-pre2 is running with Samba PDC + > >>> OpenLdap and foundry/dot1x switchs. Very well... > >>> Now, the next level is the printers. How to configure my > >>> network printers with freeradius? > >>> No solicitation does not arrive when i run "radiusd -X". > >>> Printers are using DHCP. > >>> > >>> See you! > >>> > >>> > >>> ============================================================= > >>> - > >>> List info/subscribe/unsubscribe? See > >>> http://www.freeradius.org/list/users.html > >>> > >>> > >> - > >> List info/subscribe/unsubscribe? See > >> http://www.freeradius.org/list/users.html > >> > >> > > > > > > > Well what do you actually want to do with them ? > If it's just configuration of VLANS etc.. the obvious solution is to use > mac based authentication on the switch the printers are connected to... > Not that secure ... but they are printers... shouldn't be on a sensitive > network anyway. > > Unless your talking about the printers doing auth/autz via RADIUS for > users spooling print jobs to them... > Arran > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > -- -------------------------------------------------------> ATENÇÃO: Ao encaminhar essa esse e-mail, manda somente como Cópia Carbono Oculta (CCO) evitando que vejam os e-mails para onde você enviou. <--------------------------------------------------------------------- - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html